linux-toradex.git/drivers/net/bnx2x_link.c, branch v2.6.32.45 Linux kernel for Apalis and Colibri modules bnx2x: Whitespaces and comments 2009-08-13T06:03:01+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:24:29+00:00 ab6ad5a4875e99dffe957a411fe890402a91f67f Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x: Using macro for phy address 2009-08-13T06:02:57+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:24:02+00:00 659bc5c4f2e84e69e1b10b36c16cd52ff7eb317a Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x: Re-arrange the link structures for better alignment 2009-08-13T06:02:56+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:23:59+00:00 1ef70b9c12407f0bf332ba775a8aa8f8035d0a24 Change ieee_fc to u16 instead of u32 and re-arrange the link parameters structures Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Change ieee_fc to u16 instead of u32 and re-arrange the link parameters
structures

Signed-off-by: Yitchak Gertner <gertner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x: Remove SGMII configuration when not required 2009-08-13T06:02:54+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:23:53+00:00 57937203aa077520a7e1665bfb7071b3cbb3f5a9 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x: Keep only one HW path active 2009-08-13T06:02:54+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:23:51+00:00 6f65497b567ef9a518d930ef30fe6b8f27051688 Disable bmac access while working with emac and keep the single lane SerDes in reset while working with 4 lanes XGXS Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Disable bmac access while working with emac and keep the single lane SerDes in
reset while working with 4 lanes XGXS

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x: Removing old PHY FW upgrade code 2009-08-13T06:02:36+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:23:14+00:00 cdea52128f6099e8f84459823c45790a78264022 This code should not have resided in the driver. Now that we have a new interface, this logic can reside in the application that whishes to upgrade the PHY FW Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This code should not have resided in the driver. Now that we have a new
interface, this logic can reside in the application that whishes to upgrade the
PHY FW

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x: Supporting PHY FW upgrade 2009-08-13T06:02:32+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:23:11+00:00 f57a60256d02daba1316c98da472f02cd98a58d3 There are 3 operations that the driver needs to support to allow applications to access the PHY FW (on top of the MDC/MDIO access). Since those are essentially nvram access commands, adding them to the ethtool -E interface. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
There are 3 operations that the driver needs to support to allow applications to
access the PHY FW (on top of the MDC/MDIO access). Since those are essentially
nvram access commands, adding them to the ethtool -E interface.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x: Adding XAUI CL73 autoneg support 2009-08-13T06:02:27+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:23:04+00:00 239d686d494f10ecd83a89ddc4e31f9462ca4901 Adding CL73 support to the built in PHY in the 5771x device. Also supporting fallbacks to CL73 if the link partner does not respond. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Adding CL73 support to the built in PHY in the 5771x device. Also supporting
fallbacks to CL73 if the link partner does not respond.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x: BCM8727 FW load 2009-08-13T06:02:23+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:23:01+00:00 bc7f0a053021491e292fc00810c4f2a8524453dd The BCM8727 is a dual port PHY. The FW must be loaded in a given order on all designs - including those which swapped the ports (calling port number zero the second port) Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The BCM8727 is a dual port PHY. The FW must be loaded in a given order on all
designs - including those which swapped the ports (calling port number zero the
second port)

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x: get_ext_phy_fw_version returns NULL if not applicable 2009-08-13T06:02:21+00:00 Eilon Greenstein eilong@broadcom.com 2009-08-12T08:22:59+00:00 97b41dad385bce97d60b8cdd56342f07f93fc5d2 To avoid confusion, if the PHY does not have a FW (and so, no FW version) make sure that the string is NULL. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
To avoid confusion, if the PHY does not have a FW (and so, no FW version) make
sure that the string is NULL.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>