In struct bonding there's a member called dev_addr_from_first which is used to denote when the bond dev should clone the first slave's MAC address but since we have netdev's addr_assign_type variable that is not necessary. We clone the first slave's MAC each time we have a random MAC set to the bond device. This has the nice side-effect of also fixing an inconsistency - when the MAC address of the bond dev is set after its creation, but prior to having slaves, it's not kept and the first slave's MAC is cloned. The only way to keep the MAC was to create the bond device with the MAC address set (e.g. through ip link). In all cases if the bond device is left without any slaves - its MAC gets reset to a random one as before. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We have a member called setup_by_slave in struct bonding to denote if the bond dev has different type than ARPHRD_ETHER, but that is already denoted in bond's netdev type variable if it was setup by the slave, so use that instead of the member. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add function bond_get_targets_ip(targets, ip) which searches through targets array of ips (arp_targets) and returns the position of first match. If ip == 0, returns the first free slot. On failure to find the ip or free slot, return -1. Use it to verify if the arp we've received is valid and in sysfs. v1->v2: Fix "[2/6] bonding: add helper function bond_get_targets_ip(targets, ip)", per Nikolay's advice, to verify if source ip != 0.0.0.0, otherwise we might update 'null' arp_ip_targets' last_rx. Also, address style. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
First the type of igmp_retrans (which is the actual counter of igmp_resend parameter) is changed to u8 to be able to store values up to 255 (as per documentation). There are two races that were hidden there and which are easy to trigger after the previous fix, the first is between bond_resend_igmp_join_requests and bond_change_active_slave where igmp_retrans is set and can be altered by the periodic. The second race condition is between multiple running instances of the periodic (upon execution it can be scheduled again for immediate execution which can cause the counter to go < 0 which in the unsigned case leads to unnecessary igmp retransmissions). Since in bond_change_active_slave bond->lock is held for reading and curr_slave_lock for writing, we use curr_slave_lock for mutual exclusion. We can't drop them as there're cases where RTNL is not held when bond_change_active_slave is called. RCU is unlocked in bond_resend_igmp_join_requests before getting curr_slave_lock since we don't need it there and it's pointless to delay. The decrement is moved inside the "if" block because if we decrement unconditionally there's still a possibility for a race condition although it is much more difficult to hit (many changes have to happen in a very short period in order to trigger) which in the case of 3 parallel running instances of this function and igmp_retrans == 1 (with check bond->igmp_retrans-- > 1) is: f1 passes, doesn't re-schedule, but decrements - igmp_retrans = 0 f2 then passes, doesn't re-schedule, but decrements - igmp_retrans = 255 f3 does the unnecessary retransmissions. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Makes more sense to have randomly generated address by default than to have all zeroes. It also allows user to for example put the bond into bridge without need to have any slaves in it. Also note that this changes only behaviour of bonds with no slaves. Once the first slave device is enslaved, its address will be used (no change here). Also, fix dev_assign_type values on the way. Reported-by: Pavel Šimerda <psimerda@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...