linux-toradex.git/drivers/net/can, branch v3.4.73 Linux kernel for Apalis and Colibri modules can: flexcan: fix flexcan_chip_start() on imx6 2013-12-04T18:50:14+00:00 Marc Kleine-Budde mkl@pengutronix.de 2013-09-27T10:15:05+00:00 799ed0d9c5ee00600823c5762a9e5b20776a1391 commit 0d1862ea1a5bb876cf05555a7307080cb75bf379 upstream. In the flexcan_chip_start() function first the flexcan core is going through the soft reset sequence, then the RX FIFO is enabled. With the hardware is put into FIFO mode, message buffers 1...7 are reserved by the FIFO engine. The remaining message buffers are in reset default values. This patch removes the bogus initialization of the message buffers, as it causes an imprecise external abort on imx6. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> [mkl: adjusted context for stable] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0d1862ea1a5bb876cf05555a7307080cb75bf379 upstream.

In the flexcan_chip_start() function first the flexcan core is going through
the soft reset sequence, then the RX FIFO is enabled.

With the hardware is put into FIFO mode, message buffers 1...7 are reserved by
the FIFO engine. The remaining message buffers are in reset default values.
This patch removes the bogus initialization of the message buffers, as it
causes an imprecise external abort on imx6.

Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
[mkl: adjusted context for stable]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: c_can: Fix RX message handling, handle lost message before EOB 2013-11-29T18:50:32+00:00 Markus Pargmann mpa@pengutronix.de 2013-10-28T08:54:40+00:00 06d5a745ee1257f4dbf49385bf63e2b7554cc9b7 commit 5d0f801a2ccec3b1fdabc3392c8d99ed0413d216 upstream. If we handle end of block messages with higher priority than a lost message, we can run into an endless interrupt loop. This is reproducable with a am335x processor and "cansequence -r" at 1Mbit. As soon as we loose a packet we can't escape from an interrupt loop. This patch fixes the problem by handling lost packets before EOB packets. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5d0f801a2ccec3b1fdabc3392c8d99ed0413d216 upstream.

If we handle end of block messages with higher priority than a lost message,
we can run into an endless interrupt loop.

This is reproducable with a am335x processor and "cansequence -r" at 1Mbit.
As soon as we loose a packet we can't escape from an interrupt loop.

This patch fixes the problem by handling lost packets before EOB packets.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: flexcan: flexcan_chip_start: fix regression, mark one MB for TX and abort pending TX 2013-11-13T03:01:48+00:00 Marc Kleine-Budde mkl@pengutronix.de 2013-10-04T08:52:36+00:00 f49c173bb693fa2aea6c96c931f9449ce4885d7b commit d5a7b406c529e4595ce03dc8f6dcf7fa36f106fa upstream. In patch 0d1862e can: flexcan: fix flexcan_chip_start() on imx6 the loop in flexcan_chip_start() that iterates over all mailboxes after the soft reset of the CAN core was removed. This loop put all mailboxes (even the ones marked as reserved 1...7) into EMPTY/INACTIVE mode. On mailboxes 8...63, this aborts any pending TX messages. After a cold boot there is random garbage in the mailboxes, which leads to spontaneous transmit of CAN frames during first activation. Further if the interface was disabled with a pending message (usually due to an error condition on the CAN bus), this message is retransmitted after enabling the interface again. This patch fixes the regression by: 1) Limiting the maximum number of used mailboxes to 8, 0...7 are used by the RX FIFO, 8 is used by TX. 2) Marking the TX mailbox as EMPTY/INACTIVE, so that any pending TX of that mailbox is aborted. Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d5a7b406c529e4595ce03dc8f6dcf7fa36f106fa upstream.

In patch

    0d1862e can: flexcan: fix flexcan_chip_start() on imx6

the loop in flexcan_chip_start() that iterates over all mailboxes after the
soft reset of the CAN core was removed. This loop put all mailboxes (even the
ones marked as reserved 1...7) into EMPTY/INACTIVE mode. On mailboxes 8...63,
this aborts any pending TX messages.

After a cold boot there is random garbage in the mailboxes, which leads to
spontaneous transmit of CAN frames during first activation. Further if the
interface was disabled with a pending message (usually due to an error
condition on the CAN bus), this message is retransmitted after enabling the
interface again.

This patch fixes the regression by:
1) Limiting the maximum number of used mailboxes to 8, 0...7 are used by the RX
FIFO, 8 is used by TX.
2) Marking the TX mailbox as EMPTY/INACTIVE, so that any pending TX of that
mailbox is aborted.

Cc: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: dev: fix nlmsg size calculation in can_get_size() 2013-11-04T12:23:40+00:00 Marc Kleine-Budde mkl@pengutronix.de 2013-10-05T19:25:17+00:00 bbcb20aaca3bbbfcb8c53c3587620d59320f805f [ Upstream commit fe119a05f8ca481623a8d02efcc984332e612528 ] This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit fe119a05f8ca481623a8d02efcc984332e612528 ]

This patch fixes the calculation of the nlmsg size, by adding the missing
nla_total_size().

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: pcan_usb: fix wrong memcpy() bytes length 2013-08-20T15:26:28+00:00 Stephane Grosjean s.grosjean@peak-system.com 2013-08-09T09:44:06+00:00 2efb739b6c863a77cfc362b69f755c32805a5fc2 commit 3c322a56b01695df15c70bfdc2d02e0ccd80654e upstream. Fix possibly wrong memcpy() bytes length since some CAN records received from PCAN-USB could define a DLC field in range [9..15]. In that case, the real DLC value MUST be used to move forward the record pointer but, only 8 bytes max. MUST be copied into the data field of the struct can_frame object of the skb given to the network core. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3c322a56b01695df15c70bfdc2d02e0ccd80654e upstream.

Fix possibly wrong memcpy() bytes length since some CAN records received from
PCAN-USB could define a DLC field in range [9..15].
In that case, the real DLC value MUST be used to move forward the record pointer
but, only 8 bytes max. MUST be copied into the data field of the struct
can_frame object of the skb given to the network core.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: sja1000: fix handling on dt properties on little endian systems 2013-04-26T04:19:54+00:00 Christoph Fritz chf.fritz@googlemail.com 2013-04-11T19:32:57+00:00 4f969dd6ce2941f9ce917684a058af2d7f6c77e9 commit 0443de5fbf224abf41f688d8487b0c307dc5a4b4 upstream. To get correct endianes on little endian cpus (like arm) while reading device tree properties, this patch replaces of_get_property() with of_property_read_u32(). While there use of_property_read_bool() for the handling of the boolean "nxp,no-comparator-bypass" property. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0443de5fbf224abf41f688d8487b0c307dc5a4b4 upstream.

To get correct endianes on little endian cpus (like arm) while reading device
tree properties, this patch replaces of_get_property() with
of_property_read_u32(). While there use of_property_read_bool() for the
handling of the boolean "nxp,no-comparator-bypass" property.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: sja1000: fix define conflict on SH 2013-04-05T17:04:16+00:00 Marc Kleine-Budde mkl@pengutronix.de 2013-03-27T10:36:42+00:00 bb4619ed5fd25a8ec2dd5f8841c9e3662539af26 commit f901b6bc404b67d96eca739857c097e022727b71 upstream. Thias patch fixes a define conflict between the SH architecture and the sja1000 driver: drivers/net/can/sja1000/sja1000.h:59:0: warning: "REG_SR" redefined [enabled by default] arch/sh/include/asm/ptrace_32.h:25:0: note: this is the location of the previous definition A SJA1000_ prefix is added to the offending sja1000 define only, to make a minimal patch suited for stable. A later patch will add a SJA1000_ prefix to all defines in sja1000.h. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f901b6bc404b67d96eca739857c097e022727b71 upstream.

Thias patch fixes a define conflict between the SH architecture and the sja1000
driver:

    drivers/net/can/sja1000/sja1000.h:59:0: warning:
        "REG_SR" redefined [enabled by default]
    arch/sh/include/asm/ptrace_32.h:25:0: note:
         this is the location of the previous definition

A SJA1000_ prefix is added to the offending sja1000 define only, to make a
minimal patch suited for stable. A later patch will add a SJA1000_ prefix to
all defines in sja1000.h.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: pch_can: fix invalid error codes 2013-02-04T00:24:40+00:00 Olivier Sobrie olivier@sobrie.be 2013-01-18T08:32:41+00:00 83829ab554f01ee5fcef4880b0a90cc14350b936 commit ee50e135aeb048b90fab662e661c58b67341830b upstream. Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ee50e135aeb048b90fab662e661c58b67341830b upstream.

Errors in CAN protocol (location) are reported in data[3] of the can
frame instead of data[2].

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: ti_hecc: fix invalid error codes 2013-02-04T00:24:40+00:00 Olivier Sobrie olivier@sobrie.be 2013-01-18T08:32:40+00:00 1c539392d87f6e89bfbdab14438710826373a31b commit 71088c4bd9b8f8cbffb0e66f2abc14297e4b2ca8 upstream. Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Cc: Anant Gole <anantgole@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 71088c4bd9b8f8cbffb0e66f2abc14297e4b2ca8 upstream.

Errors in CAN protocol (location) are reported in data[3] of the can
frame instead of data[2].

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Cc: Anant Gole <anantgole@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: c_can: fix invalid error codes 2013-02-04T00:24:39+00:00 Olivier Sobrie olivier@sobrie.be 2013-01-18T08:32:39+00:00 e3b308abd9a496f300b1552d8d09eb7c6b934478 commit 6ea45886865c1abb01bb861f7f6bdd5d0f398cb3 upstream. Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6ea45886865c1abb01bb861f7f6bdd5d0f398cb3 upstream.

Errors in CAN protocol (location) are reported in data[3] of the can
frame instead of data[2].

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>