linux-toradex.git/drivers/net/ethernet/intel/i40evf, branch v4.9.14

i40evf: support queue-specific settings for interrupt moderation

2016-09-25T05:50:23+00:00

In commit a75e8005d506f3 ("i40e: queue-specific settings for interrupt
moderation") the i40e driver gained support for setting interrupt
moderation values per queue. This patch adds support for this feature
to the i40evf driver as well. In addition, a few changes are made to
the i40e implementation to add function header documentation comments,
as well.

This behaves in a similar fashion to the implementation in i40e. Thus,
requesting the moderation value when no queue is provided will report
queue 0 value, while setting the value without a queue will set all
queues at once.

Change-ID: I1f310a57c8e6c84a8524c178d44d1b7a6d3a848e
Signed-off-by: Jacob Keller 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40e/i40evf: Add txring_txq function to match fm10k and ixgbe

2016-09-25T05:22:17+00:00

This patch adds a txring_txq function which allows us to convert a
i40e_ring/i40evf_ring to a netdev_tx_queue structure.  This way we
can avoid having to make a multi-line function call for all the spots
that need access to this.

Change-ID: Ic063b71d8b92ea406d2c32e798c8e2b02809d65b
Signed-off-by: Alexander Duyck 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40e: Fix Flow Director raw_buf cleanup

2016-09-25T05:15:12+00:00

The Tx cleanup flow was incorrectly assuming it could check for the flow
director bits after it had unmapped the buffer.  However in this case it
results in us trying to free a raw_buf as though it is an sk_buff.

To fix this I am moving up the flag test for the FD_SB bit so that when
find a non-NULL skb or raw_buf value we then check the flag and use the
appropriate call to free the buffer.

Change-ID: I6284034ba1ea87c9922e56f6eb3181f7f09bddde
Signed-off-by: Alexander Duyck 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40evf: enable adaptive interrupt throttling

2016-09-25T03:08:35+00:00

All of the code to support adaptive interrupt throttling is already in
the interrupt handler, it just needs to be enabled. Fill out the data
structures properly to make it happen. Single-flow traffic tests may
show slightly lower throughput, but interrupts per second will drop by
about 75%.

Change-ID: I9cd7d42c025b906bf1bb85c6aeb6112684aa6471
Signed-off-by: Mitch Williams 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40e/i40evf: Changed version to 1.6.16

2016-09-25T02:37:30+00:00

Signed-off-by: Bimmy Pujari 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40e: add encap csum VF offload flag

2016-09-25T02:30:23+00:00

Add ENCAP_CSUM offload negotiation flag. Currently VF assumes checksum
offload for encapsulated packets is supported by default. Going forward,
this feature needs to be negotiated with PF before advertising to the
stack. Hence, we need a flag to control it.
This is in regards to prepping up for VF base mode functionality support.

Change-ID: Iaab1f25cc0abda5f2fbe3309092640f0e77d163e
Signed-off-by: Preethi Banala 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40evf: remove unnecessary error checking against i40e_shutdown_adminq

2016-09-23T05:33:41+00:00

The i40e_shutdown_adminq function never returns failure. There is no need to
check the non-0 return value. Clean up the unnecessary error checking and
warning against it.

Change-ID: Ibb616f09cfb93bd1a872ebf3241a15fb8354b31b
Signed-off-by: Lihong Yang 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40e: Limit TX descriptor count in cases where frag size is greater than 16K

2016-09-23T05:33:41+00:00

The i40e driver was incorrectly assuming that we would always be pulling
no more than 1 descriptor from each fragment.  It is in fact possible for
us to end up with the case where 2 descriptors worth of data may be pulled
when a frame is larger than one of the pieces generated when aligning the
payload to either 4K or pieces smaller than 16K.

To adjust for this we just need to make certain to test all the way to the
end of the fragments as it is possible for us to span 2 descriptors in the
block before us so we need to guarantee that even the last 6 descriptors
have enough data to fill a full frame.

Change-ID: Ic2ecb4d6b745f447d334e66c14002152f50e2f99
Signed-off-by: Alexander Duyck 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40evf: remove unnecessary error checking against i40evf_up_complete

2016-09-23T05:33:40+00:00

Function i40evf_up_complete() always returns success. Changed this to a
void type and removed the code that checks the return status and prints
an error message.

Change-ID: I8c400f174786b9c855f679e470f35af292fb50ad
Signed-off-by: Bimmy Pujari 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher

i40evf: Fix link state event handling

2016-09-23T05:33:40+00:00

Currently disabling the link state from PF via
	ip link set enp5s0f0 vf 0 state disable
doesn't disable the CARRIER on the VF.

This patch updates the carrier and starts/stops the tx queues based on the
link state notification from PF.

  PF: enp5s0f0, VF: enp5s2
  #modprobe i40e
  #echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs
  #ip link set enp5s2 up
  #ip -d link show enp5s2
  175: enp5s2:  mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
      link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64
  #ip link set enp5s0f0 vf 0 state disable
  #ip -d link show enp5s0f0
  171: enp5s0f0:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 72 numrxqueues 72 portid 6805ca2e7268
      vf 0 MAC 00:00:00:00:00:00, spoof checking on, link-state disable, trust off
      vf 1 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off
  #ip -d link show enp5s2
  175: enp5s2:  mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
       link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 16 numrxqueues 16

Signed-off-by: Sridhar Samudrala 
Tested-by: Andrew Bowers 
Signed-off-by: Jeff Kirsher