linux-toradex.git/drivers/net/ethernet/mscc/ocelot_stats.c, branch v6.3 Linux kernel for Apalis and Colibri modules net: mscc: ocelot: add TX_MM_HOLD to ocelot_mm_stats_layout 2023-03-22T04:28:07+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-03-21T01:03:25+00:00 5291099e0f61a4a1f4d2e11ac2af8123ece17e0e The lack of a definition for this counter is what initially prompted me to investigate a problem which really manifested itself as the previous change, "net: mscc: ocelot: fix transfer from region->buf to ocelot->stats". When TX_MM_HOLD is defined in enum ocelot_stat but not in struct ocelot_stat_layout ocelot_mm_stats_layout, this creates a hole, which due to the aforementioned bug, makes all counters following TX_MM_HOLD be recorded off by one compared to their correct position. So for example, a non-zero TX_PMAC_OCTETS would be reported as TX_MERGE_FRAGMENTS, TX_PMAC_UNICAST would be reported as TX_PMAC_OCTETS, TX_PMAC_64 would be reported as TX_PMAC_PAUSE, etc etc. This is because the size of the hole (1) is much smaller than the size of the region, so the phenomenon where the stats are off-by-one, rather than lost, prevails. However, the phenomenon where stats are lost can be seen too, for example with DROP_LOCAL, which is at the beginning of its own region (offset 0x000400 vs the previous 0x0002b0 constitutes a discontinuity). This is also reported as off by one and saved to TX_PMAC_1527_MAX, but that counter is not reported to the unstructured "ethtool -S", as opposed to DROP_LOCAL which is (as "drop_local"). Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The lack of a definition for this counter is what initially prompted me
to investigate a problem which really manifested itself as the previous
change, "net: mscc: ocelot: fix transfer from region->buf to ocelot->stats".

When TX_MM_HOLD is defined in enum ocelot_stat but not in struct
ocelot_stat_layout ocelot_mm_stats_layout, this creates a hole, which
due to the aforementioned bug, makes all counters following TX_MM_HOLD
be recorded off by one compared to their correct position. So for
example, a non-zero TX_PMAC_OCTETS would be reported as TX_MERGE_FRAGMENTS,
TX_PMAC_UNICAST would be reported as TX_PMAC_OCTETS, TX_PMAC_64 would be
reported as TX_PMAC_PAUSE, etc etc. This is because the size of the hole
(1) is much smaller than the size of the region, so the phenomenon where
the stats are off-by-one, rather than lost, prevails.

However, the phenomenon where stats are lost can be seen too, for
example with DROP_LOCAL, which is at the beginning of its own region
(offset 0x000400 vs the previous 0x0002b0 constitutes a discontinuity).
This is also reported as off by one and saved to TX_PMAC_1527_MAX, but
that counter is not reported to the unstructured "ethtool -S", as
opposed to DROP_LOCAL which is (as "drop_local").

Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: mscc: ocelot: fix transfer from region->buf to ocelot->stats 2023-03-22T04:27:51+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-03-21T01:03:24+00:00 17dfd210459837b453c2a3c20406ee12082f151c To understand the problem, we need some definitions. The driver is aware of multiple counters (enum ocelot_stat), yet not all switches supported by the driver implement all counters. There are 2 statistics layouts: ocelot_stats_layout and ocelot_mm_stats_layout, the latter having 36 counters more than the former. ocelot->stats[] is not a compact array, i.e. there are elements within it which are not going to be populated for ocelot_stats_layout. On the other hand, ocelot->stats[] is easily indexable, for example "tx_octets" for port 3 can be found at ocelot->stats[3 * OCELOT_NUM_STATS + OCELOT_STAT_TX_OCTETS], and that is why we keep it sparse. Regions, as created by ocelot_prepare_stats_regions(), are compact (every element from region->buf will correspond to a counter that is present in this switch's layout) but are not easily indexable. Let's define holes as the ranges of values of enum ocelot_stat for which ocelot_stats_layout doesn't have a "reg" defined. For example, there is a hole between OCELOT_STAT_RX_GREEN_PRIO_7 and OCELOT_STAT_TX_OCTETS which is of 23 elements that are only present on ocelot_mm_stats_layout, and as such, they are also present in enum ocelot_stat. Let's define the left extremity of the hole - the last enum ocelot_stat still defined - as A (in this case OCELOT_STAT_RX_GREEN_PRIO_7) and the right extremity - the first enum ocelot_stat that is defined after a series of undefined ones - as B (in this case OCELOT_STAT_TX_OCTETS). There is a bug in the procedure which transfers stats from region->buf[] to ocelot->stats[]. For each hole in the ocelot_stats_layout, the logic transfers the stats starting with enum ocelot_stat B to ocelot->stats[] index A + 1. So all stats after a hole are saved to a position which is off by B - A + 1 elements. This causes 2 kinds of issues: (a) counters which shouldn't increment increment (b) counters which should increment don't Holes in the ocelot_stat_layout automatically imply the end of a region and the beginning of a new one; however the reverse is not necessarily true. For example, for ocelot_mm_stat_layout, there could be multiple regions (which indicate discontinuities in register addresses) while there is no hole (which indicates discontinuities in enum ocelot_stat values). In the example above, the stats from the second region->buf[] are not transferred to ocelot->stats starting with index "port * OCELOT_NUM_STATS + OCELOT_STAT_TX_OCTETS" as they should, but rather, starting with element "port * OCELOT_NUM_STATS + OCELOT_STAT_RX_GREEN_PRIO_7 + 1". That stats[] array element is not reported to user space for switches that use ocelot_stat_layout, and that is how issue (b) occurs. However, if the length of the second region is larger than the hole, then some stats will start to be transferred to the ocelot->stats[] indices which *are* reported to user space, but those indices contain wrong values (corresponding to unexpected counters). This is how issue (a) occurs. The procedure, as it was introduced in commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for stats"), was not buggy, because there were no holes in the struct ocelot_stat_layout instances at that time. The problem is that when those holes were introduced, the function was not updated to take them into consideration. To update the procedure, we need to know, for each region, which enum ocelot_stat corresponds to its region->base. We have no way of deducing that based on the contents of struct ocelot_stats_region, so we need to add this information. Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
To understand the problem, we need some definitions.

The driver is aware of multiple counters (enum ocelot_stat), yet not all
switches supported by the driver implement all counters. There are 2
statistics layouts: ocelot_stats_layout and ocelot_mm_stats_layout, the
latter having 36 counters more than the former.

ocelot->stats[] is not a compact array, i.e. there are elements within
it which are not going to be populated for ocelot_stats_layout. On the
other hand, ocelot->stats[] is easily indexable, for example "tx_octets"
for port 3 can be found at ocelot->stats[3 * OCELOT_NUM_STATS +
OCELOT_STAT_TX_OCTETS], and that is why we keep it sparse.

Regions, as created by ocelot_prepare_stats_regions(), are compact
(every element from region->buf will correspond to a counter that is
present in this switch's layout) but are not easily indexable.

Let's define holes as the ranges of values of enum ocelot_stat for which
ocelot_stats_layout doesn't have a "reg" defined. For example, there is
a hole between OCELOT_STAT_RX_GREEN_PRIO_7 and OCELOT_STAT_TX_OCTETS
which is of 23 elements that are only present on ocelot_mm_stats_layout,
and as such, they are also present in enum ocelot_stat. Let's define the
left extremity of the hole - the last enum ocelot_stat still defined -
as A (in this case OCELOT_STAT_RX_GREEN_PRIO_7) and the right extremity -
the first enum ocelot_stat that is defined after a series of undefined
ones - as B (in this case OCELOT_STAT_TX_OCTETS).

There is a bug in the procedure which transfers stats from region->buf[]
to ocelot->stats[].

For each hole in the ocelot_stats_layout, the logic transfers the stats
starting with enum ocelot_stat B to ocelot->stats[] index A + 1. So all
stats after a hole are saved to a position which is off by B - A + 1
elements.

This causes 2 kinds of issues:
(a) counters which shouldn't increment increment
(b) counters which should increment don't

Holes in the ocelot_stat_layout automatically imply the end of a region
and the beginning of a new one; however the reverse is not necessarily
true. For example, for ocelot_mm_stat_layout, there could be multiple
regions (which indicate discontinuities in register addresses) while
there is no hole (which indicates discontinuities in enum ocelot_stat
values).

In the example above, the stats from the second region->buf[] are not
transferred to ocelot->stats starting with index
"port * OCELOT_NUM_STATS + OCELOT_STAT_TX_OCTETS" as they should, but
rather, starting with element
"port * OCELOT_NUM_STATS + OCELOT_STAT_RX_GREEN_PRIO_7 + 1".

That stats[] array element is not reported to user space for switches
that use ocelot_stat_layout, and that is how issue (b) occurs.

However, if the length of the second region is larger than the hole,
then some stats will start to be transferred to the ocelot->stats[]
indices which *are* reported to user space, but those indices contain
wrong values (corresponding to unexpected counters). This is how issue
(a) occurs.

The procedure, as it was introduced in commit d87b1c08f38a ("net: mscc:
ocelot: use bulk reads for stats"), was not buggy, because there were no
holes in the struct ocelot_stat_layout instances at that time. The
problem is that when those holes were introduced, the function was not
updated to take them into consideration.

To update the procedure, we need to know, for each region, which enum
ocelot_stat corresponds to its region->base. We have no way of deducing
that based on the contents of struct ocelot_stats_region, so we need to
add this information.

Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: mscc: ocelot: fix stats region batching 2023-03-22T04:27:10+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-03-21T01:03:23+00:00 6acc72a43eac78a309160d0a7512bbc59bcdd757 The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to "u32 reg". However, "u32 reg" is not quite a register address, but an enum ocelot_reg, which in itself encodes an enum ocelot_target target in the upper bits, and an index into the ocelot->map[target][] array in the lower bits. So, whereas the previous code comparison between stats_layout[i].offset and last + 1 was correct (because those "offsets" at the time were 32-bit relative addresses), the new code, comparing layout[i].reg to last + 4 is not correct, because the "reg" here is an enum/index, not an actual register address. What we want to compare are indeed register addresses, but to do that, we need to actually go through the same motions as __ocelot_bulk_read_ix() itself. With this bug, all statistics counters are deemed by ocelot_prepare_stats_regions() as constituting their own region. (Truncated) log on VSC9959 (Felix) below (prints added by me): Before: region of 1 contiguous counters starting with SYS:STAT:CNT[0x000] region of 1 contiguous counters starting with SYS:STAT:CNT[0x001] region of 1 contiguous counters starting with SYS:STAT:CNT[0x002] ... region of 1 contiguous counters starting with SYS:STAT:CNT[0x041] region of 1 contiguous counters starting with SYS:STAT:CNT[0x042] region of 1 contiguous counters starting with SYS:STAT:CNT[0x080] region of 1 contiguous counters starting with SYS:STAT:CNT[0x081] ... region of 1 contiguous counters starting with SYS:STAT:CNT[0x0ac] region of 1 contiguous counters starting with SYS:STAT:CNT[0x100] region of 1 contiguous counters starting with SYS:STAT:CNT[0x101] ... region of 1 contiguous counters starting with SYS:STAT:CNT[0x111] After: region of 67 contiguous counters starting with SYS:STAT:CNT[0x000] region of 45 contiguous counters starting with SYS:STAT:CNT[0x080] region of 18 contiguous counters starting with SYS:STAT:CNT[0x100] Since commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for stats") intended bulking as a performance improvement, and since now, with trivial-sized regions, performance is even worse than without bulking at all, this could easily qualify as a performance regression. Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Colin Foster <colin.foster@in-advantage.com> Tested-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to
"u32 reg".

However, "u32 reg" is not quite a register address, but an enum
ocelot_reg, which in itself encodes an enum ocelot_target target in the
upper bits, and an index into the ocelot->map[target][] array in the
lower bits.

So, whereas the previous code comparison between stats_layout[i].offset
and last + 1 was correct (because those "offsets" at the time were
32-bit relative addresses), the new code, comparing layout[i].reg to
last + 4 is not correct, because the "reg" here is an enum/index, not an
actual register address.

What we want to compare are indeed register addresses, but to do that,
we need to actually go through the same motions as
__ocelot_bulk_read_ix() itself.

With this bug, all statistics counters are deemed by
ocelot_prepare_stats_regions() as constituting their own region.
(Truncated) log on VSC9959 (Felix) below (prints added by me):

Before:

region of 1 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x001]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x002]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x041]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x042]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x081]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x0ac]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x100]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x101]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x111]

After:

region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]

Since commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for
stats") intended bulking as a performance improvement, and since now,
with trivial-sized regions, performance is even worse than without
bulking at all, this could easily qualify as a performance regression.

Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ethtool: provide shims for stats aggregation helpers when CONFIG_ETHTOOL_NETLINK=n 2023-01-26T14:28:25+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-01-25T11:02:14+00:00 9179f5fe41733ff56f7dfcb83c0c1456f6d2e4ae ethtool_aggregate_*_stats() are implemented in net/ethtool/stats.c, a file which is compiled out when CONFIG_ETHTOOL_NETLINK=n. In order to avoid adding Kbuild dependencies from drivers (which call these helpers) on CONFIG_ETHTOOL_NETLINK, let's add some shim definitions which simply make the helpers dead code. This means the function prototypes should have been located in include/linux/ethtool_netlink.h rather than include/linux/ethtool.h. Fixes: 449c5459641a ("net: ethtool: add helpers for aggregate statistics") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230125110214.4127759-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
ethtool_aggregate_*_stats() are implemented in net/ethtool/stats.c, a
file which is compiled out when CONFIG_ETHTOOL_NETLINK=n. In order to
avoid adding Kbuild dependencies from drivers (which call these helpers)
on CONFIG_ETHTOOL_NETLINK, let's add some shim definitions which simply
make the helpers dead code.

This means the function prototypes should have been located in
include/linux/ethtool_netlink.h rather than include/linux/ethtool.h.

Fixes: 449c5459641a ("net: ethtool: add helpers for aggregate statistics")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230125110214.4127759-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959 2023-01-23T12:44:18+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-01-19T12:27:03+00:00 ab3f97a9610a8d90dc9934517e82c3272d4e98a0 The Felix VSC9959 switch supports frame preemption and has a MAC Merge layer. In addition to the structured stats that exist for the eMAC, export the counters associated with its pMAC (pause, RMON, MAC, PHY, control) plus the high-level MAC Merge layer stats. The unstructured ethtool counters, as well as the rtnl_link_stats64 were left to report only the eMAC counters. Because statistics processing is quite self-contained in ocelot_stats.c now, I've opted for introducing an ocelot->mm_supported bool, based on which the common switch lib does everything, rather than pushing the TSN-specific code in felix_vsc9959.c, as happens for other TSN stuff. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The Felix VSC9959 switch supports frame preemption and has a MAC Merge
layer. In addition to the structured stats that exist for the eMAC,
export the counters associated with its pMAC (pause, RMON, MAC, PHY,
control) plus the high-level MAC Merge layer stats. The unstructured
ethtool counters, as well as the rtnl_link_stats64 were left to report
only the eMAC counters.

Because statistics processing is quite self-contained in ocelot_stats.c
now, I've opted for introducing an ocelot->mm_supported bool, based on
which the common switch lib does everything, rather than pushing the
TSN-specific code in felix_vsc9959.c, as happens for other TSN stuff.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: mscc: ocelot: hide access to ocelot_stats_layout behind a helper 2023-01-23T12:44:18+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-01-19T12:27:02+00:00 497eea9f8ed5987ade08e23725fdb0f25cd2ffcd Some hardware instances of the ocelot driver support the MAC Merge layer, which gives access to an extra preemptible MAC. This has implications upon the statistics. There will be a stats layout when MM isn't supported, and a different one when it is. The ocelot_stats_layout() helper will return the correct one. In preparation of that, refactor the existing code to use this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Some hardware instances of the ocelot driver support the MAC Merge
layer, which gives access to an extra preemptible MAC. This has
implications upon the statistics. There will be a stats layout when MM
isn't supported, and a different one when it is.
The ocelot_stats_layout() helper will return the correct one.
In preparation of that, refactor the existing code to use this helper.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: mscc: ocelot: allow ocelot_stat_layout elements with no name 2023-01-23T12:44:18+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2023-01-19T12:27:01+00:00 1a733bbddfad466e2561acc8d86b9e5df2985c95 We will add support for pMAC counters and MAC merge layer counters, which are only reported via the structured stats, and the current ocelot_get_strings() stands in our way, because it expects that the statistics should be placed in the data array at the same index as found in the ocelot_stats_layout array. That is not true. Statistics which don't have a name should not be exported to the unstructured ethtool -S, so we need to have different indices into the ocelot_stats_layout array (i) and into the data array (data itself). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
We will add support for pMAC counters and MAC merge layer counters,
which are only reported via the structured stats, and the current
ocelot_get_strings() stands in our way, because it expects that the
statistics should be placed in the data array at the same index as found
in the ocelot_stats_layout array.

That is not true. Statistics which don't have a name should not be
exported to the unstructured ethtool -S, so we need to have different
indices into the ocelot_stats_layout array (i) and into the data array
(data itself).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: mscc: ocelot: issue a warning if stats are incorrectly ordered 2022-11-22T14:36:44+00:00 Colin Foster colin.foster@in-advantage.com 2022-11-19T23:14:06+00:00 877e7b7c3b12d78f0488b767ed10ec21166ee422 Ocelot uses regmap_bulk_read() operations to efficiently read stats registers. Currently the implementation relies on the stats layout to be ordered to be most efficient. Issue a warning if any future implementations happen to break this pattern. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Ocelot uses regmap_bulk_read() operations to efficiently read stats
registers. Currently the implementation relies on the stats layout to be
ordered to be most efficient.

Issue a warning if any future implementations happen to break this pattern.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: mscc: ocelot: remove unnecessary exposure of stats structures 2022-11-22T14:36:43+00:00 Colin Foster colin.foster@in-advantage.com 2022-11-19T23:14:05+00:00 a3bb8f521fd8703cdb429d3e52f3e6802706c87d Since commit 4d1d157fb6a4 ("net: mscc: ocelot: share the common stat definitions between all drivers") there is no longer a need to share the stats structures to the world. Relocate these definitions to inside ocelot_stats.c instead of a global include header. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Since commit 4d1d157fb6a4 ("net: mscc: ocelot: share the common stat
definitions between all drivers") there is no longer a need to share the
stats structures to the world. Relocate these definitions to inside
ocelot_stats.c instead of a global include header.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: mscc: ocelot: remove redundant stats_layout pointers 2022-11-22T14:36:43+00:00 Colin Foster colin.foster@in-advantage.com 2022-11-19T23:14:04+00:00 33d5eeb9a684a2e962ca0be3fe557a2c9f48d8e2 Ever since commit 4d1d157fb6a4 ("net: mscc: ocelot: share the common stat definitions between all drivers") the stats_layout entry in ocelot and felix drivers have become redundant. Remove the unnecessary code. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Ever since commit 4d1d157fb6a4 ("net: mscc: ocelot: share the common stat
definitions between all drivers") the stats_layout entry in ocelot and
felix drivers have become redundant. Remove the unnecessary code.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>