linux-toradex.git/drivers/net/ethernet/rdc, branch v3.2.9 Linux kernel for Apalis and Colibri modules r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list 2011-11-17T01:24:52+00:00 Florian Fainelli florian@openwrt.org 2011-11-16T06:00:08+00:00 bbc13ab9d26f4ff675775dd7dc24d5cae17b85d5 We are checking whether the MCR0_HASHEN bit is set using a logical and instead of bitwise and, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
We are checking whether the MCR0_HASHEN bit is set using a logical and
instead of bitwise and, fix that.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
r6040: bump version to 0.28 and date to 07Oct2011. 2011-10-10T03:50:59+00:00 Florian Fainelli florian@openwrt.org 2011-10-06T23:36:28+00:00 5bdc4f5de1345c221f5b51d73fafe3e5de718a54 Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
r6040: invoke phy_{start,stop} when appropriate 2011-10-10T03:50:59+00:00 Florian Fainelli florian@openwrt.org 2011-10-06T23:36:22+00:00 06e92c33999fd66128c2256b0461455633c3d53c Joe reported to me that right after a bring up of a r6040 interface the ethtool output had no consistent output with respect to link duplex and speed. Fix this by adding a missing phy_start call in r6040_up and conversely a phy_stop call in r6040_down to properly initialize phy states. Reported-by: Joe Chou <Joe.Chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
Joe reported to me that right after a bring up of a r6040 interface
the ethtool output had no consistent output with respect to link duplex
and speed. Fix this by adding a missing phy_start call in r6040_up and
conversely a phy_stop call in r6040_down to properly initialize phy states.

Reported-by: Joe Chou <Joe.Chou@rdc.com.tw>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
MII: fix Kconfig dependencies for MII 2011-09-15T19:49:08+00:00 Jeff Kirsher jeffrey.t.kirsher@intel.com 2011-09-14T21:23:14+00:00 aaba215ca0b4232824c92b830853f465f16a6672 MII Kconfig option is apart of the core networking drivers and by default NET_CORE is enabled so drivers selecting MII will have MII enabled as well. It was found using the randconfig option during testing, MII would be selected but NET_CORE could be disabled. This caused a dependency error. Resolved the dependency by selecting NET_CORE when MII is selected. Reported-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
MII Kconfig option is apart of the core networking drivers and
by default NET_CORE is enabled so drivers selecting MII will
have MII enabled as well.  It was found using the randconfig
option during testing, MII would be selected but NET_CORE
could be disabled.  This caused a dependency error.

Resolved the dependency by selecting NET_CORE when MII is
selected.

Reported-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/*: Enabled vendor Kconfig options 2011-08-27T07:58:56+00:00 Jeff Kirsher jeffrey.t.kirsher@intel.com 2011-08-23T08:29:52+00:00 88f07484ccdf08e58dc462ed1ac7eb2e84d88a17 Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll <sfc@canb.auug.org.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 
Based on finds for Stephen Rothwell, where current defconfig's
enable a ethernet driver and it is not compiled due to the newly
added NET_VENDOR_* component of Kconfig.

This patch enables all the "new" Kconfig options so that current
defconfig's will continue to compile the expected drivers.  In
addition, by enabling all the new Kconfig options does not add
any un-expected options.

CC: Stephen Rothwll <sfc@canb.auug.org.au>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
net: remove use of ndo_set_multicast_list in drivers 2011-08-18T03:22:03+00:00 Jiri Pirko jpirko@redhat.com 2011-08-16T06:29:01+00:00 afc4b13df143122f99a0eb10bfefb216c2806de0 replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
replace it by ndo_set_rx_mode

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
r6040: Move the RDC driver 2011-08-12T19:38:34+00:00 Jeff Kirsher jeffrey.t.kirsher@intel.com 2011-07-24T06:26:01+00:00 58565a35eab01eb5fba928af23d31a636d03a056 Move the RDC driver into drivers/net/ethernet/rdc/ and make the necessary Kconfig and Makefile changes. CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 
Move the RDC driver into drivers/net/ethernet/rdc/ and make the
necessary Kconfig and Makefile changes.

CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>