linux-toradex.git/drivers/net/ethernet/sis, branch v3.9.7

remove init of dev->perm_addr in drivers

2013-01-09T02:00:48+00:00

perm_addr is initialized correctly in register_netdevice() so to init it in
drivers is no longer needed.

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

drivers/net: fix up function prototypes after __dev* removals

2012-12-07T19:22:22+00:00

The __dev* removal patches for the network drivers ended up messing up
the function prototypes for a bunch of drivers.  This patch fixes all of
them back up to be properly aligned.

Bonus is that this almost removes 100 lines of code, always a nice
surprise.

Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: David S. Miller

sis900: remove __dev* attributes

2012-12-03T19:16:51+00:00

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton 
Cc: Daniele Venzano 
Signed-off-by: Greg Kroah-Hartman

sis190: remove __dev* attributes

2012-12-03T19:16:51+00:00

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton 
Cc: Francois Romieu 
Signed-off-by: Greg Kroah-Hartman

sis900: fix sis900_set_mode call parameters.

2012-11-18T23:28:15+00:00

Leftover of 57d6d456cfb89264f87d24f52640ede23fdf12bd ("sis900: stop
using net_device.{base_addr, irq} and convert to __iomem.").

It is needed for suspend / resume to work.

Signed-off-by: Francois Romieu 
Tested-by: Jan Janssen 
Cc: Daniele Venzano 
Signed-off-by: David S. Miller

drivers/net/ethernet/sis/sis900.c: fix error return code

2012-10-07T18:37:10+00:00

The function sis900_probe() return 0 for success and negative value
for most of its internal tests failures. There is one exception
that is error case going to err_out_cleardev:. Fore this error case,
the function abort its success execution path, but returns non negative
value, making it difficult for a caller function to notice the error.

This patch fixes the error case that do not return negative value.

This was found by Coccinelle, but the code change was made by hand.
This patch is not robot generated.

A simplified version of the semantic match that finds this problem is
as follows: (http://coccinelle.lip6.fr/)

// 
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// 

Signed-off-by: Peter Senna Tschudin 
Signed-off-by: David S. Miller

sections: fix section conflicts in drivers/net

2012-10-05T18:04:42+00:00

Signed-off-by: Andi Kleen 
Cc: David Miller 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

sis900: stop using net_device.{base_addr, irq} and convert to __iomem.

2012-04-07T09:47:18+00:00

- pci_resource_start() can be removed from sis900_get_mac_addr() because
  the IO range is maped and stored into the device private struct early
  in the device probe function.
- the driver contains a few direct accesses to low IO ports that forbid
  to re(#)define the usual out{l, w, b} macros.

Signed-off-by: Francois Romieu 
Cc: Daniele Venzano

sis190: stop using net_device.{base_addr, irq}

2012-04-07T09:45:27+00:00

Signed-off-by: Francois Romieu

net: replace random_ether_addr() with eth_hw_addr_random()

2012-02-15T20:34:16+00:00

Replace usage of random_ether_addr() with eth_hw_addr_random()
to set addr_assign_type correctly to NET_ADDR_RANDOM.

Change the trivial cases.

v2: adapt to renamed eth_hw_addr_random()

Signed-off-by: Danny Kukawka 
Signed-off-by: David S. Miller