linux-toradex.git/drivers/net/ethernet/wiznet, branch v4.9.127

treewide: remove redundant #include

2016-10-11T22:06:33+00:00

Kernel source files need not include  explicitly
because the top Makefile forces to include it with:

  -include $(srctree)/include/linux/kconfig.h

This commit removes explicit includes except the following:

  * arch/s390/include/asm/facilities_src.h
  * tools/testing/radix-tree/linux/kernel.h

These two are used for host programs.

Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

net: ethernet: wiznet: Remove create_workqueue

2016-06-02T19:15:17+00:00

alloc_workqueue replaces deprecated create_workqueue().

A dedicated workqueue has been used since the workitems are involved
in normal device operation. Workitems &priv->rx_work and &priv->tx_work,
map to w5100_rx_work and w5100_tx_work respectively and are involved in
receiving and transmitting packets. Forward progress under
memory pressure is a requirement here.

create_workqueue has been replaced with alloc_workqueue with max_active
as 0 since there is no need for throttling the number of active work
items.

Since the driver may be used in memory reclaim path,
WQ_MEM_RECLAIM has been set to guarantee forward progress.

flush_workqueue is unnecessary since destroy_workqueue() itself calls
drain_workqueue() which flushes repeatedly till the workqueue
becomes empty. Hence the call to flush_workqueue() has been dropped.

Signed-off-by: Bhaktipriya Shridhar 
Acked-by: Tejun Heo 
Signed-off-by: David S. Miller

net: w5100-spi: add support to specify MAC address by device tree

2016-05-16T17:55:49+00:00

This adds support to specify the MAC address by 'mac-address' or
'local-mac-address' properties in the device tree.  These are common
properties for the Ethernet controller.

Signed-off-by: Akinobu Mita 
Cc: Mike Sinkovsky 
Cc: David S. Miller 
Signed-off-by: David S. Miller

net: w5100: increase TX timeout period

2016-05-16T17:55:49+00:00

This increases TX timeout period from one second to 5 seconds which is
the default value if the driver doesn't explicitly set
net_device->watchdog_timeo.

The one second timeout is too short for W5100 with SPI interface mode
which doesn't support burst READ/WRITE processing in the SPI transfer.
If the packet is transmitted while RX packets are being received at a
very high rate, the TX transmittion work in the workqueue is delayed
and the watchdog timer is expired.

Signed-off-by: Akinobu Mita 
Cc: Mike Sinkovsky 
Cc: David S. Miller 
Signed-off-by: David S. Miller

net: w5100: fix MAC filtering for W5500

2016-05-16T17:55:48+00:00

W5500 has different bit position for MAC filter in Socket n mode
register from W5100 and W5200.

Signed-off-by: Akinobu Mita 
Cc: Mike Sinkovsky 
Cc: David S. Miller 
Signed-off-by: David S. Miller

net: w5100: remove unused is_w5200()

2016-05-16T17:55:48+00:00

The is_w5200() function is not used anymore by the commit which adds
the W5500 support.

Signed-off-by: Akinobu Mita 
Cc: Mike Sinkovsky 
Cc: David S. Miller 
Signed-off-by: David S. Miller

treewide: replace dev->trans_start update with helper

2016-05-04T18:16:49+00:00

Replace all trans_start updates with netif_trans_update helper.
change was done via spatch:

struct net_device *d;
@@
- d->trans_start = jiffies
+ netif_trans_update(d)

Compile tested only.

Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-xtensa@linux-xtensa.org
Cc: linux1394-devel@lists.sourceforge.net
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Florian Westphal 
Acked-by: Felipe Balbi 
Acked-by: Mugunthan V N 
Acked-by: Antonio Quartulli 
Signed-off-by: David S. Miller

net: w5100: support W5500

2016-04-28T01:55:45+00:00

This adds support for W5500 chip.

W5500 has similar register and memory organization with W5100 and W5200.
There are a few important differences listed below but it is still
possible to share common code with W5100 and W5200.

* W5500 register and memory are organized by multiple blocks.  Each one
is selected by 16bits offset address and 5bits block select bits.

But the existing register access operations take u16 address.  This change
extends the addess by u32 address and put offset address to lower 16bits
and block select bits to upper 16bits.

This change also adds the offset addresses for socket register and TX/RX
memory blocks to the driver private data structure in order to reduce
conditional switches for each chip.

* W5500 has the different register offset for socket interrupt mask
register.  Newly added internal functions w5100_enable_intr() and
w5100_disable_intr() take care of the diffrence.

* W5500 has the different register offset for retry time-value register.
But this register is only used to verify that the reset value is correctly
read at initialization.  So move the verification to w5100_hw_reset()
which already does different things for different chips.

Signed-off-by: Akinobu Mita 
Cc: Mike Sinkovsky 
Cc: David S. Miller 
Signed-off-by: David S. Miller

net: w5100: don't build spi driver without w5100

2016-04-19T05:05:15+00:00

The w5100-spi driver front-end only makes sense when the w5100
core driver is enabled, not for a configuration that only has w5300:

drivers/net/built-in.o: In function `w5100_spi_remove':
drivers/net/ethernet/wiznet/w5100-spi.c:277: undefined reference to `w5100_remove'
drivers/net/built-in.o: In function `w5100_spi_probe':
drivers/net/ethernet/wiznet/w5100-spi.c:272: undefined reference to `w5100_probe'
drivers/net/built-in.o: In function `w5200_spi_init':
drivers/net/ethernet/wiznet/w5100-spi.c:125: undefined reference to `w5100_ops_priv'
drivers/net/built-in.o: In function `w5200_spi_readbulk':
drivers/net/ethernet/wiznet/w5100-spi.c:125: undefined reference to `w5100_ops_priv'
drivers/net/built-in.o: In function `w5200_spi_writebulk':
drivers/net/ethernet/wiznet/w5100-spi.c:125: undefined reference to `w5100_ops_priv'
drivers/net/built-in.o:(.data+0x3ed1c): undefined reference to `w5100_pm_ops'

This adds an appropriate Kconfig dependency.

Signed-off-by: Arnd Bergmann 
Fixes: 630cf09751fe ("net: w5100: support SPI interface mode")
Signed-off-by: David S. Miller

net: w5100: support W5200

2016-04-16T22:30:27+00:00

This adds support for W5200 chip.

W5100 and W5200 have similar memory map although some of their offsets
are different.  The register access sequences between them are different
but w5100 driver has abstraction layer for difference bus interface
modes so it is easy to add W5200 support to w5100 and w5100-spi drivers.

Signed-off-by: Akinobu Mita 
Cc: Mike Sinkovsky 
Cc: David S. Miller 
Signed-off-by: David S. Miller