linux-toradex.git/drivers/net/ethernet, branch v3.2.9 Linux kernel for Apalis and Colibri modules davinci_emac: Do not free all rx dma descriptors during init 2012-03-01T00:31:19+00:00 Christian Riesch christian.riesch@omicron.at 2012-02-23T01:14:17+00:00 df9a5f8f94f3276aaa8c960a46f6838f7fdab974 commit 5d69703263d588dbb03f4e57091afd8942d96e6d upstream. This patch fixes a regression that was introduced by commit 0a5f38467765ee15478db90d81e40c269c8dda20 davinci_emac: Add Carrier Link OK check in Davinci RX Handler Said commit adds a check whether the carrier link is ok. If the link is not ok, the skb is freed and no new dma descriptor added to the rx dma channel. This causes trouble during initialization when the carrier status has not yet been updated. If a lot of packets are received while netif_carrier_ok returns false, all dma descriptors are freed and the rx dma transfer is stopped. The bug occurs when the board is connected to a network with lots of traffic and the ifconfig down/up is done, e.g., when reconfiguring the interface with DHCP. The bug can be reproduced by flood pinging the davinci board while doing ifconfig eth0 down ifconfig eth0 up on the board. After that, the rx path stops working and the overrun value reported by ifconfig is counting up. This patch reverts commit 0a5f38467765ee15478db90d81e40c269c8dda20 and instead issues warnings only if cpdma_chan_submit returns -ENOMEM. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5d69703263d588dbb03f4e57091afd8942d96e6d upstream.

This patch fixes a regression that was introduced by

commit 0a5f38467765ee15478db90d81e40c269c8dda20
davinci_emac: Add Carrier Link OK check in Davinci RX Handler

Said commit adds a check whether the carrier link is ok. If the link is
not ok, the skb is freed and no new dma descriptor added to the rx dma
channel. This causes trouble during initialization when the carrier
status has not yet been updated. If a lot of packets are received while
netif_carrier_ok returns false, all dma descriptors are freed and the
rx dma transfer is stopped.

The bug occurs when the board is connected to a network with lots of
traffic and the ifconfig down/up is done, e.g., when reconfiguring
the interface with DHCP.

The bug can be reproduced by flood pinging the davinci board while doing
ifconfig eth0 down
ifconfig eth0 up
on the board.

After that, the rx path stops working and the overrun value reported
by ifconfig is counting up.

This patch reverts commit 0a5f38467765ee15478db90d81e40c269c8dda20
and instead issues warnings only if cpdma_chan_submit returns -ENOMEM.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
jme: Fix FIFO flush issue 2012-03-01T00:31:19+00:00 Guo-Fu Tseng cooldavid@cooldavid.org 2012-02-22T08:58:10+00:00 5fbc730462e4c65e83bc343c4d3f97292b867ff7 commit ba9adbe67e288823ac1deb7f11576ab5653f833e upstream. Set the RX FIFO flush watermark lower. According to Federico and JMicron's reply, setting it to 16QW would be stable on most platforms. Otherwise, user might experience packet drop issue. Reported-by: Federico Quagliata <federico@quagliata.org> Fixed-by: Federico Quagliata <federico@quagliata.org> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ba9adbe67e288823ac1deb7f11576ab5653f833e upstream.

Set the RX FIFO flush watermark lower.
According to Federico and JMicron's reply,
setting it to 16QW would be stable on most platforms.
Otherwise, user might experience packet drop issue.

Reported-by: Federico Quagliata <federico@quagliata.org>
Fixed-by: Federico Quagliata <federico@quagliata.org>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
via-velocity: S3 resume fix. 2012-03-01T00:31:00+00:00 David Lv DavidLv@viatech.com.cn 2012-02-04T23:22:26+00:00 d14d408060c6a2d35c115f8bbded2faa41d21de7 [ Upstream commit b530b1930bbd9d005345133f0ff0c556d2a52b19 ] Initially diagnosed on Ubuntu 11.04 with kernel 2.6.38. velocity_close is not called during a suspend / resume cycle in this driver and it has no business playing directly with power states. Signed-off-by: David Lv <DavidLv@viatech.com.cn> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit b530b1930bbd9d005345133f0ff0c556d2a52b19 ]

Initially diagnosed on Ubuntu 11.04 with kernel 2.6.38.

velocity_close is not called during a suspend / resume cycle in this
driver and it has no business playing directly with power states.

Signed-off-by: David Lv <DavidLv@viatech.com.cn>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3c59x: shorten timer period for slave devices 2012-03-01T00:30:57+00:00 Eric Dumazet eric.dumazet@gmail.com 2012-02-14T10:27:09+00:00 96dd4ee6793dd443256eda40dd38fa3e84a02c89 [ Upstream commit 3013dc0cceb9baaf25d5624034eeaa259bf99004 ] Jean Delvare reported bonding on top of 3c59x adapters was not detecting network cable removal fast enough. 3c59x indeed uses a 60 seconds timer to check link status if carrier is on, and 5 seconds if carrier is off. This patch reduces timer period to 5 seconds if device is a bonding slave. Reported-by: Jean Delvare <jdelvare@suse.de> Acked-by: Jean Delvare <jdelvare@suse.de> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 3013dc0cceb9baaf25d5624034eeaa259bf99004 ]

Jean Delvare reported bonding on top of 3c59x adapters was not detecting
network cable removal fast enough.

3c59x indeed uses a 60 seconds timer to check link status if carrier is
on, and 5 seconds if carrier is off.

This patch reduces timer period to 5 seconds if device is a bonding
slave.

Reported-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: enable TC35815 for MIPS again 2012-02-20T20:46:16+00:00 Atsushi Nemoto anemo@mba.ocn.ne.jp 2012-02-06T14:51:03+00:00 5f892ebab0da0262e16737c1a618a19384da29bf commit a1728800bed3b93b231d99e97c756f622b9991c2 upstream. 8<---------------------------------------------------------------------- From: Ralf Roesch <ralf.roesch@rw-gmbh.de> Date: Wed, 16 Nov 2011 09:33:50 +0100 Subject: net: enable TC35815 for MIPS again TX493[8,9] MIPS SoCs support 2 Ethernet channels of type TC35815 which are connected to the internal PCI controller. And JMR3927 MIPS board has a TC35815 chip on board. These dependencies were lost on movement to drivers/net/ethernet/toshiba. Signed-off-by: Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a1728800bed3b93b231d99e97c756f622b9991c2 upstream.

8<----------------------------------------------------------------------
From: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Date: Wed, 16 Nov 2011 09:33:50 +0100
Subject: net: enable TC35815 for MIPS again

TX493[8,9] MIPS SoCs support 2 Ethernet channels of type TC35815
which are connected to the internal PCI controller.
And JMR3927 MIPS board has a TC35815 chip on board.
These dependencies were lost on movement to drivers/net/ethernet/toshiba.

Signed-off-by: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
igb: fix vf lookup 2012-02-20T20:46:13+00:00 Greg Rose gregory.v.rose@intel.com 2012-02-02T23:51:43+00:00 3039fb27d54ba3ffa564c56ef25d799e756ca3ad commit 0629292117572a60465f38cdedde2f8164c3df0b upstream. Recent addition of code to find already allocated VFs failed to take account that systems with 2 or more multi-port SR-IOV capable controllers might have already enabled VFs. Make sure that the VFs the function is finding are actually subordinate to the particular instance of the adapter that is looking for them and not subordinate to some device that has previously enabled SR-IOV. This is applicable to 3.2+ kernels. Reported-by: David Ahern <daahern@cisco.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Robert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0629292117572a60465f38cdedde2f8164c3df0b upstream.

Recent addition of code to find already allocated VFs failed to take
account that systems with 2 or more multi-port SR-IOV capable controllers
might have already enabled VFs.  Make sure that the VFs the function is
finding are actually subordinate to the particular instance of the adapter
that is looking for them and not subordinate to some device that has
previously enabled SR-IOV.

This is applicable to 3.2+ kernels.

Reported-by: David Ahern <daahern@cisco.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ixgbe: fix vf lookup 2012-02-20T20:46:12+00:00 Greg Rose gregory.v.rose@intel.com 2012-02-03T00:54:13+00:00 ec00c9c49aef783ec75155431d43df4cd93e24a4 commit a4b08329c74985e5cc3a44b6d2b2c59444ed8079 upstream. Recent addition of code to find already allocated VFs failed to take account that systems with 2 or more multi-port SR-IOV capable controllers might have already enabled VFs. Make sure that the VFs the function is finding are actually subordinate to the particular instance of the adapter that is looking for them and not subordinate to some device that has previously enabled SR-IOV. This bug exists in 3.2 stable as well as 3.3 release candidates. Reported-by: David Ahern <daahern@cisco.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Robert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a4b08329c74985e5cc3a44b6d2b2c59444ed8079 upstream.

Recent addition of code to find already allocated VFs failed to take
account that systems with 2 or more multi-port SR-IOV capable controllers
might have already enabled VFs.  Make sure that the VFs the function is
finding are actually subordinate to the particular instance of the adapter
that is looking for them and not subordinate to some device that has
previously enabled SR-IOV.

This bug exists in 3.2 stable as well as 3.3 release candidates.

Reported-by: David Ahern <daahern@cisco.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8139cp: fix missing napi_gro_flush. 2012-02-13T19:16:56+00:00 Francois Romieu romieu@fr.zoreil.com 2012-01-08T13:41:33+00:00 ff91ca433acbb464e82dbc655c1339498c20d45a commit b189e810619a676e6b931a942a3e8387f3d39c21 upstream. The driver uses __napi_complete and napi_gro_receive. Without it, the driver hits the BUG_ON(n->gro_list) assertion hard in __napi_complete. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Marin Glibic <zhilla2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b189e810619a676e6b931a942a3e8387f3d39c21 upstream.

The driver uses __napi_complete and napi_gro_receive. Without it, the
driver hits the BUG_ON(n->gro_list) assertion hard in __napi_complete.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Marin Glibic <zhilla2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: fsl: fec: fix build for mx23-only kernel 2012-01-03T18:48:41+00:00 Wolfram Sang w.sang@pengutronix.de 2012-01-03T03:46:47+00:00 0d9032477f4ba2323079466efef0c1419613eebf If one only selects mx23-based boards, compile fails: drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function) drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function) This is because fec.h uses CONFIG_SOC_IMX28 to determine the register layout of the core which makes sense since the MX23 does not have a fec. However, Kconfig uses the broader ARCH_MXS symbol and this way even makes the fec-driver default for MX23. Adapt Kconfig to use the more precise SOC_IMX28 as well. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: David S. Miller <davem@davemloft.net> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
If one only selects mx23-based boards, compile fails:

drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function)
drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function)

This is because fec.h uses CONFIG_SOC_IMX28 to determine the register
layout of the core which makes sense since the MX23 does not have a fec.
However, Kconfig uses the broader ARCH_MXS symbol and this way even
makes the fec-driver default for MX23. Adapt Kconfig to use the more
precise SOC_IMX28 as well.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skge: restore rx multicast filter on resume and after config changes 2011-12-31T04:32:45+00:00 Florian Zumbiehl florz@florz.de 2011-12-30T17:30:09+00:00 fe3c8cc9226c7487c053edad9229dc85e93534d7 Restore skge hardware registers for multicast filtering to their appropriate values after system resume and after hardware restarts that are done when changing certain settings. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Restore skge hardware registers for multicast filtering to their
appropriate values after system resume and after hardware restarts
that are done when changing certain settings.

Signed-off-by: Florian Zumbiehl <florz@florz.de>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>