linux-toradex.git/drivers/net/ethernet, branch v3.9.7

tg3: Wait for boot code to finish after power on

2013-06-20T19:01:38+00:00

commit df465abfe06f7dc4f33f4a96d17f096e9e8ac917 upstream.

Some systems that don't need wake-on-lan may choose to power down the
chip on system standby. Upon resume, the power on causes the boot code
to startup and initialize the hardware. On one new platform, this is
causing the device to go into a bad state due to a race between the
driver and boot code, once every several hundred resumes. The same race
exists on open since we come up from a power on.

This patch adds a wait for boot code signature at the beginning of
tg3_init_hw() which is common to both cases. If there has not been a
power-off or the boot code has already completed, the signature will be
present and poll_fw() returns immediately. Also return immediately if
the device does not have firmware.

Signed-off-by: Nithin Nayak Sujir 
Signed-off-by: Michael Chan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tg3: Add read dma workaround for 5720

2013-06-07T19:53:35+00:00

commit 9bc297ea0622bb2a6b3abfa2fa84f0a3b86ef8c8 upstream.

Commit 091f0ea30074bc43f9250961b3247af713024bc6 "tg3: Add New 5719 Read
DMA workaround" added a workaround for TX DMA stall on the 5719. This
workaround needs to be applied to the 5720 as well.

Reported-by: Roland Dreier 
Tested-by: Roland Dreier 
Signed-off-by: Nithin Nayak Sujir 
Signed-off-by: Michael Chan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tg3: Fix data corruption on 5725 with TSO

2013-06-07T19:52:28+00:00

commit 0f0d15100a8ac875bdd408324c473e16d73d3557 upstream.

The 5725 family of devices (asic rev 5762), corrupts TSO packets where
the buffer is within MSS bytes of a 4G boundary (4G, 8G etc.). Detect
this condition and trigger the workaround path.

Signed-off-by: Michael Chan 
Signed-off-by: Nithin Nayak Sujir 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tg3: Skip powering down function 0 on certain serdes devices

2013-06-07T19:52:27+00:00

commit 44f3b503c16425c8e9db4bbaa2fc9cd0c9d0ba91 upstream.

On the 5718, 5719 and 5720 serdes devices, powering down function 0
results in all the other ports being powered down. Add code to skip
function 0 power down.

v2:
 - Modify tg3_phy_power_bug() function to use a switch instead of a
   complicated if statement. Suggested by Joe Perches.

Signed-off-by: Michael Chan 
Signed-off-by: Nithin Nayak Sujir 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

3c59x: fix PCI resource management

2013-05-19T18:38:37+00:00

[ Upstream commit 4b264a1676e70dc656ba53a8cac690f2d4b65f4e ]

The driver wrongly claimed I/O ports at an address returned by pci_iomap() --
even if it was passed an MMIO address.  Fix this by claiming/releasing all PCI
resources in the PCI driver's probe()/remove() methods instead and get rid of
'must_free_region' flag weirdness (why would Cardbus claim anything for us?).

Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

3c59x: fix freeing nonexistent resource on driver unload

2013-05-19T18:38:37+00:00

[ Upstream commit c81400be716aa4c76f6ebf339ba94358dbbf6da6 ]

When unloading the driver that drives an EISA board, a message similar to the
following one is displayed:

Trying to free nonexistent resource <0000000000013000-000000000001301f>

Then an user is unable to reload the driver because the resource it requested in
the previous load hasn't been freed. This happens most probably due to a typo in
vortex_eisa_remove() which calls release_region() with 'dev->base_addr'  instead
of 'edev->base_addr'...

Reported-by: Matthew Whitehead 
Tested-by: Matthew Whitehead 
Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)

2013-05-19T18:38:34+00:00

[ Upstream commit 3b54912f9cd167641b91d4a697bd742f70e534fe ]

The venerable 3c509 driver only sets its device parent in one case, the ISAPnP one.
It does this with the SET_NETDEV_DEV function. It should register with the device
hierarchy in two additional cases: standard (non-PnP) ISA and EISA.

- Currently they appear here:
/sys/devices/virtual/net/eth0 (standard ISA)
/sys/devices/virtual/net/eth1 (EISA)

- Rather, they should instead be here:
/sys/devices/isa/3c509.0/net/eth0 (standard ISA)
/sys/devices/pci0000:00/0000:00:07.0/00:04/net/eth1 (EISA)

Tested on ISA and EISA boards.

Signed-off-by: Matthew Whitehead 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sfc: Fix naming of MTD partitions for FPGA bitfiles

2013-05-19T18:38:33+00:00

[ Upstream commit 89cc80a44b7c320e08599cb86f6aef0ead8986a1 ]

efx_mcdi_get_board_cfg() uses a buffer for the firmware response that
is only large enough to hold subtypes for the originally defined set
of NVRAM partitions.  Longer responses are truncated, and we may read
off the end of the buffer when copying out subtypes for additional
partitions.  In particular, this can result in the MTD partition for
an FPGA bitfile being named e.g. 'eth5 sfc_fpga:00' when it should be
'eth5 sfc_fpga:01'.  This means the firmware update tool (sfupdate)
can't tell which bitfile should be written to the partition.

Correct the response buffer size.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tile: support new Tilera hypervisor

2013-05-19T18:38:28+00:00

commit c539914dcd9a68c63305e055b14115a6a19578a8 upstream.

The Tilera hypervisor shipped in releases up through MDE 4.1 launches
the client operating system (i.e. Linux) at privilege level 1 (PL1).
Starting with MDE 4.2, as part of the work to enable KVM, the
Tilera hypervisor launches Linux at PL2 instead.

This commit makes the KERNEL_PL option default to 2 for tilegx, while
still saying at 1 for tilepro, which doesn't have an updated hypervisor.
It also explains how and when you might want to choose another value.
In addition, we change a small buglet in the on-chip Ethernet driver,
where we were failing to use the KERNEL_PL constant in an API call.

To make the transition cleaner, this change also provides the updated
hv_init() API for the new hypervisor that supports announcing Linux's
compiled-in PL, so the hypervisor can generate a suitable error in the
case of a mismatched hypervisor and Linux binary.

Signed-off-by: Chris Metcalf 
Signed-off-by: Greg Kroah-Hartman

r8169: fix 8168evl frame padding.

2013-05-11T14:18:23+00:00

commit e5195c1f31f399289347e043d6abf3ffa80f0005 upstream.

Signed-off-by: Stefan Bader 
Acked-by: Francois Romieu 
Cc: hayeswang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman