linux-toradex.git/drivers/net/ethernet, branch v4.0.3

net/mlx4_en: Schedule napi when RX buffers allocation fails

2015-05-13T12:14:17+00:00

[ Upstream commit 07841f9d94c11afe00c0498cf242edf4075729f4 ]

When system is out of memory, refilling of RX buffers fails while
the driver continue to pass the received packets to the kernel stack.
At some point, when all RX buffers deplete, driver may fall into a
sleep, and not recover when memory for new RX buffers is once again
availible. This is because hardware does not have valid descriptors,
so no interrupt will be generated for the driver to return to work
in napi context. Fix it by schedule the napi poll function from
stats_task delayed workqueue, as long as the allocations fail.

Signed-off-by: Ido Shamay 
Signed-off-by: Amir Vadai 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cxgb4: Fix MC1 memory offset calculation

2015-05-13T12:14:17+00:00

[ Upstream commit 7f0b8a56c978b0a3315ac84c6cbb065413afb8e9 ]

Commit 6559a7e8296002b4 ("cxgb4: Cleanup macros so they follow the same
style and look consistent") introduced a regression where reading MC1
memory in adapters where MC0 isn't present or MC0 size is not equal to MC1
size caused the adapter to crash due to incorrect computation of memoffset.
Fix is to read the size of MC0 instead of MC1 for offset calculation

Signed-off-by: Steve Wise 
Signed-off-by: Hariprasad Shenai 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mlx4: Fix tx ring affinity_mask creation

2015-05-13T12:14:17+00:00

[ Upstream commit 42eab005a5dd5d7ea2b0328aecc4d6cc0c23c9c2 ]

By default, the number of tx queues is limited by the number of online cpus
in mlx4_en_get_profile(). However, this limit no longer holds after the
ethtool .set_channels method has been called. In that situation, the driver
may access invalid bits of certain cpumask variables when queue_index >=
nr_cpu_ids.

Signed-off-by: Benjamin Poirier 
Acked-by: Ido Shamay 
Fixes: d03a68f ("net/mlx4_en: Configure the XPS queue mapping on driver load")
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

e1000: add dummy allocator to fix race condition between mtu change and netpoll

2015-05-06T20:04:06+00:00

commit 08e8331654d1d7b2c58045e549005bc356aa7810 upstream.

There is a race condition between e1000_change_mtu's cleanups and
netpoll, when we change the MTU across jumbo size:

Changing MTU frees all the rx buffers:
    e1000_change_mtu -> e1000_down -> e1000_clean_all_rx_rings ->
        e1000_clean_rx_ring

Then, close to the end of e1000_change_mtu:
    pr_info -> ... -> netpoll_poll_dev -> e1000_clean ->
        e1000_clean_rx_irq -> e1000_alloc_rx_buffers -> e1000_alloc_frag

And when we come back to do the rest of the MTU change:
    e1000_up -> e1000_configure -> e1000_configure_rx ->
        e1000_alloc_jumbo_rx_buffers

alloc_jumbo finds the buffers already != NULL, since data (shared with
page in e1000_rx_buffer->rxbuf) has been re-alloc'd, but it's garbage,
or at least not what is expected when in jumbo state.

This results in an unusable adapter (packets don't get through), and a
NULL pointer dereference on the next call to e1000_clean_rx_ring
(other mtu change, link down, shutdown):

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [] put_compound_page+0x7e/0x330

    [...]

Call Trace:
 [] put_page+0x55/0x60
 [] e1000_clean_rx_ring+0x134/0x200
 [] e1000_clean_all_rx_rings+0x45/0x60
 [] e1000_down+0x1c0/0x1d0
 [] ? deactivate_slab+0x7f0/0x840
 [] e1000_change_mtu+0xdc/0x170
 [] dev_set_mtu+0xa0/0x140
 [] do_setlink+0x218/0xac0
 [] ? nla_parse+0xb9/0x120
 [] rtnl_newlink+0x6d0/0x890
 [] ? kvm_clock_read+0x20/0x40
 [] ? sched_clock_cpu+0xa8/0x100
 [] rtnetlink_rcv_msg+0x92/0x260

By setting the allocator to a dummy version, netpoll can't mess up our
rx buffers.  The allocator is set back to a sane value in
e1000_configure_rx.

Fixes: edbbb3ca1077 ("e1000: implement jumbo receive with partial descriptors")
Signed-off-by: Sabrina Dubroca 
Tested-by: Aaron Brown 
Signed-off-by: Jeff Kirsher 
Signed-off-by: Greg Kroah-Hartman

net/macb: fix the peripheral version test

2015-05-06T20:03:50+00:00

commit 361918970b7426bba97a64678ef2b2679c37199b upstream.

We currently need two checks of the peripheral version in MACB_MID register.
One of them got out of sync after modification by 8a013a9c71b2 (net: macb:
Include multi queue support for xilinx ZynqMP ethernet version).
Fix this in macb_configure_caps() so that xilinx ZynqMP will be considered
as a GEM flavor.

Fixes: 8a013a9c71b2 ("net: macb: Include multi queue support for xilinx ZynqMP
ethernet version")

Signed-off-by: Nicolas Ferre 
Cc: Michal Simek 
Cc: Punnaiah Choudary Kalluri 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/mlx4_en: Prevent setting invalid RSS hash function

2015-05-06T20:03:35+00:00

[ Upstream commit b37069090b7c5615610a8aa6b36533d67b364d38 ]

mlx4_en_check_rxfh_func() was checking for hardware support before
setting a known RSS hash function, but didn't do any check before
setting unknown RSS hash function. Need to make it fail on such values.
In this occasion, moved the actual setting of the new value from the
check function into mlx4_en_set_rxfh().

Fixes: 947cbb0 ("net/mlx4_en: Support for configurable RSS hash function")
Signed-off-by: Amir Vadai 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

pxa168: fix double deallocation of managed resources

2015-05-06T20:03:34+00:00

[ Upstream commit 0e03fd3e335d272bee88fe733d5fd13f5c5b7140 ]

Commit 43d3ddf87a57 ("net: pxa168_eth: add device tree support") starts
to use managed resources by adding devm_clk_get() and
devm_ioremap_resource(), but it leaves explicit iounmap() and clock_put()
in pxa168_eth_remove() and in failure handling code of pxa168_eth_probe().
As a result double free can happen.

The patch removes explicit resource deallocation. Also it converts
clk_disable() to clk_disable_unprepare() to make it symmetrical with
clk_prepare_enable().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bnx2x: Fix busy_poll vs netpoll

2015-04-29T08:22:17+00:00

[ Upstream commit 074975d0374333f656c48487aa046a21a9b9d7a1 ]

Commit 9a2620c877454 ("bnx2x: prevent WARN during driver unload")
switched the napi/busy_lock locking mechanism from spin_lock() into
spin_lock_bh(), breaking inter-operability with netconsole, as netpoll
disables interrupts prior to calling our napi mechanism.

This switches the driver into using atomic assignments instead of the
spinlock mechanisms previously employed.

Based on initial patch from Yuval Mintz & Ariel Elior

I basically added softirq starvation avoidance, and mixture
of atomic operations, plain writes and barriers.

Note this slightly reduces the overhead for this driver when no
busy_poll sockets are in use.

Fixes: 9a2620c877454 ("bnx2x: prevent WARN during driver unload")
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/mlx4_core: Fix error message deprecation for ConnectX-2 cards

2015-04-06T21:32:27+00:00

Commit 1daa4303b4ca ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.

Fixes: 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug")
Signed-off-by: Jack Morgenstein 
Signed-off-by: Amir Vadai 
Signed-off-by: David S. Miller

mvneta: dont call mvneta_adjust_link() manually

2015-04-06T20:35:40+00:00

mvneta_adjust_link() is a callback for of_phy_connect() and should
not be called directly. The result of calling it directly is as below:

Signed-off-by: David S. Miller