linux-toradex.git/drivers/net/hamradio/mkiss.c, branch v6.1

Merge tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-01-12T19:21:52+00:00

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 5.17-rc1.

  Nothing major in here, just lots of good updates and fixes, including:

   - more tty core cleanups from Jiri as well as mxser driver cleanups.
     This is the majority of the core diffstat

   - tty documentation updates from Jiri

   - platform_get_irq() updates

   - various serial driver updates for new features and hardware

   - fifo usage for 8250 console, reducing cpu load a lot

   - LED fix for keyboards, long-time bugfix that went through many
     revisions

   - minor cleanups

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: core: Keep mctrl register state and cached copy in sync
  serial: stm32: correct loop for dma error handling
  serial: stm32: fix flow control transfer in DMA mode
  serial: stm32: rework TX DMA state condition
  serial: stm32: move tx dma terminate DMA to shutdown
  serial: pl011: Drop redundant DTR/RTS preservation on close/open
  serial: pl011: Drop CR register reset on set_termios
  serial: pl010: Drop CR register reset on set_termios
  serial: liteuart: fix MODULE_ALIAS
  serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure
  Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2"
  tty: goldfish: Use platform_get_irq() to get the interrupt
  serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
  tty: serial: meson: Drop the legacy compatible strings and clock code
  serial: pmac_zilog: Use platform_get_irq() to get the interrupt
  serial: bcm63xx: Use platform_get_irq() to get the interrupt
  serial: ar933x: Use platform_get_irq() to get the interrupt
  serial: vt8500: Use platform_get_irq() to get the interrupt
  serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
  serial: pxa: Use platform_get_irq() to get the interrupt
  ...

hamradio: improve the incomplete fix to avoid NPD

2021-12-18T12:32:48+00:00

The previous commit 3e0588c291d6 ("hamradio: defer ax25 kfree after
unregister_netdev") reorder the kfree operations and unregister_netdev
operation to prevent UAF.

This commit improves the previous one by also deferring the nullify of
the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs.
Partial of the stack trace is shown below.

BUG: kernel NULL pointer dereference, address: 0000000000000538
RIP: 0010:ax_xmit+0x1f9/0x400
...
Call Trace:
 dev_hard_start_xmit+0xec/0x320
 sch_direct_xmit+0xea/0x240
 __qdisc_run+0x166/0x5c0
 __dev_queue_xmit+0x2c7/0xaf0
 ax25_std_establish_data_link+0x59/0x60
 ax25_connect+0x3a0/0x500
 ? security_socket_connect+0x2b/0x40
 __sys_connect+0x96/0xc0
 ? __hrtimer_init+0xc0/0xc0
 ? common_nsleep+0x2e/0x50
 ? switch_fpu_return+0x139/0x1a0
 __x64_sys_connect+0x11/0x20
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The crash point is shown as below

static void ax_encaps(...) {
  ...
  set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL!
  ...
}

By placing the nullify action after the unregister_netdev, the ax->tty
pointer won't be assigned as NULL net_device framework layer is well
synchronized.

Signed-off-by: Lin Ma 
Signed-off-by: David S. Miller

Merge 5.16-rc4 into tty-next

2021-12-06T08:32:47+00:00

We need the tty/serial driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman

tty: remove file from tty_ldisc_ops::ioctl and compat_ioctl

2021-11-25T17:36:27+00:00

After the previous patches, noone needs 'file' parameter in neither
ioctl hook from tty_ldisc_ops. So remove 'file' from both of them.

Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Cc: Wolfgang Grandegger 
Cc: Marc Kleine-Budde 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: Andreas Koensgen 
Cc: Paul Mackerras 
Acked-by: Krzysztof Kozlowski  [NFC]
Acked-by: Dmitry Torokhov 
Acked-by: Marc Kleine-Budde 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20211122094529.24171-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

hamradio: fix macro redefine warning

2021-11-23T11:38:13+00:00

MIPS/IA64 define END as assembly function ending, which conflict
with END definition in mkiss.c, just undef it at first

Reported-by: lkp@intel.com
Signed-off-by: Huang Pei 
Signed-off-by: David S. Miller

hamradio: defer ax25 kfree after unregister_netdev

2021-11-09T11:48:39+00:00

There is a possible race condition (use-after-free) like below

 (USE)                       |  (FREE)
ax25_sendmsg                 |
 ax25_queue_xmit             |
  dev_queue_xmit             |
   __dev_queue_xmit          |
    __dev_xmit_skb           |
     sch_direct_xmit         | ...
      xmit_one               |
       netdev_start_xmit     | tty_ldisc_kill
        __netdev_start_xmit  |  mkiss_close
         ax_xmit             |   kfree
          ax_encaps          |
                             |

Even though there are two synchronization primitives before the kfree:
1. wait_for_completion(&ax->dead). This can prevent the race with
routines from mkiss_ioctl. However, it cannot stop the routine coming
from upper layer, i.e., the ax25_sendmsg.

2. netif_stop_queue(ax->dev). It seems that this line of code aims to
halt the transmit queue but it fails to stop the routine that already
being xmit.

This patch reorder the kfree after the unregister_netdev to avoid the
possible UAF as the unregister_netdev() is well synchronized and won't
return if there is a running routine.

Signed-off-by: Lin Ma 
Signed-off-by: David S. Miller

hamradio: use dev_addr_set() for setting device address

2021-10-13T16:41:37+00:00

Use dev_addr_set() instead of writing to netdev->dev_addr
directly in hamradio drivers.

Signed-off-by: Jakub Kicinski

Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-07-05T21:08:24+00:00

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.14-rc1.

  A bit more than normal, but nothing major, lots of cleanups.
  Highlights are:

   - lots of tty api cleanups and mxser driver cleanups from Jiri

   - build warning fixes

   - various serial driver updates

   - coding style cleanups

   - various tty driver minor fixes and updates

   - removal of broken and disable r3964 line discipline (finally!)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
  serial: mvebu-uart: remove unused member nb from struct mvebu_uart
  arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
  dt-bindings: mvebu-uart: fix documentation
  serial: mvebu-uart: correctly calculate minimal possible baudrate
  serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
  serial: mvebu-uart: fix calculation of clock divisor
  tty: make linux/tty_flip.h self-contained
  serial: Prefer unsigned int to bare use of unsigned
  serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  serial: qcom_geni_serial: use DT aliases according to DT bindings
  Revert "tty: serial: Add UART driver for Cortina-Access platform"
  tty: serial: Add UART driver for Cortina-Access platform
  MAINTAINERS: add me back as mxser maintainer
  mxser: Documentation, fix typos
  mxser: Documentation, make the docs up-to-date
  mxser: Documentation, remove traces of callout device
  mxser: introduce mxser_16550A_or_MUST helper
  mxser: rename flags to old_speed in mxser_set_serial_info
  mxser: use port variable in mxser_set_serial_info
  mxser: access info->MCR under info->slock
  ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-06-19T02:47:02+00:00

Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh

scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.

Signed-off-by: Jakub Kicinski

net: hamradio: fix memory leak in mkiss_close

2021-06-17T18:24:54+00:00

My local syzbot instance hit memory leak in
mkiss_open()[1]. The problem was in missing
free_netdev() in mkiss_close().

In mkiss_open() netdevice is allocated and then
registered, but in mkiss_close() netdevice was
only unregistered, but not freed.

Fail log:

BUG: memory leak
unreferenced object 0xffff8880281ba000 (size 4096):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00  ax0.............
    00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00  .'.*............
  backtrace:
    [] kvmalloc_node+0x61/0xf0
    [] alloc_netdev_mqs+0x98/0xe80
    [] mkiss_open+0xb2/0x6f0 [1]
    [] tty_ldisc_open+0x9b/0x110
    [] tty_set_ldisc+0x2e8/0x670
    [] tty_ioctl+0xda3/0x1440
    [] __x64_sys_ioctl+0x193/0x200
    [] do_syscall_64+0x3a/0xb0
    [] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8880141a9a00 (size 96):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff  ...(.......(....
    98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00  .....@..........
  backtrace:
    [] __hw_addr_create_ex+0x5b/0x310
    [] __hw_addr_add_ex+0x1f8/0x2b0
    [] dev_addr_init+0x10b/0x1f0
    [] alloc_netdev_mqs+0x13b/0xe80
    [] mkiss_open+0xb2/0x6f0 [1]
    [] tty_ldisc_open+0x9b/0x110
    [] tty_set_ldisc+0x2e8/0x670
    [] tty_ioctl+0xda3/0x1440
    [] __x64_sys_ioctl+0x193/0x200
    [] do_syscall_64+0x3a/0xb0
    [] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8880219bfc00 (size 512):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff  ...(............
    80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00  ................
  backtrace:
    [] kvmalloc_node+0x61/0xf0
    [] alloc_netdev_mqs+0x777/0xe80
    [] mkiss_open+0xb2/0x6f0 [1]
    [] tty_ldisc_open+0x9b/0x110
    [] tty_set_ldisc+0x2e8/0x670
    [] tty_ioctl+0xda3/0x1440
    [] __x64_sys_ioctl+0x193/0x200
    [] do_syscall_64+0x3a/0xb0
    [] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff888029b2b200 (size 256):
  comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [] kvmalloc_node+0x61/0xf0
    [] alloc_netdev_mqs+0x912/0xe80
    [] mkiss_open+0xb2/0x6f0 [1]
    [] tty_ldisc_open+0x9b/0x110
    [] tty_set_ldisc+0x2e8/0x670
    [] tty_ioctl+0xda3/0x1440
    [] __x64_sys_ioctl+0x193/0x200
    [] do_syscall_64+0x3a/0xb0
    [] entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss")
Signed-off-by: Pavel Skripkin 
Signed-off-by: David S. Miller