linux-toradex.git/drivers/net/hippi, branch v4.10

Replace with globally

2016-12-24T19:46:01+00:00

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*'
  sed -i -e "s!$PATT!#include !" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro 
Signed-off-by: Linus Torvalds

net: use core MTU range checking in misc drivers

2016-10-20T18:51:10+00:00

firewire-net:
- set min/max_mtu
- remove fwnet_change_mtu

nes:
- set max_mtu
- clean up nes_netdev_change_mtu

xpnet:
- set min/max_mtu
- remove xpnet_dev_change_mtu

hippi:
- set min/max_mtu
- remove hippi_change_mtu

batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
  in the optimal place, don't have hardware to test with

rionet:
- set min/max_mtu
- remove rionet_change_mtu

slip:
- set min/max_mtu
- streamline sl_change_mtu

um/net_kern:
- remove pointless ndo_change_mtu

hsi/clients/ssi_protocol:
- use core MTU range checking
- remove now redundant ssip_pn_set_mtu

ipoib:
- set a default max MTU value
- Note: ipoib's actual max MTU can vary, depending on if the device is in
  connected mode or not, so we'll just set the max_mtu value to the max
  possible, and let the ndo_change_mtu function continue to validate any new
  MTU change requests with checks for CM or not. Note that ipoib has no
  min_mtu set, and thus, the network core's mtu > 0 check is the only lower
  bounds here.

mptlan:
- use net core MTU range checking
- remove now redundant mpt_lan_change_mtu

fddi:
- min_mtu = 21, max_mtu = 4470
- remove now redundant fddi_change_mtu (including export)

fjes:
- min_mtu = 8192, max_mtu = 65536
- The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
  get past the core net MTU range checks so fjes_change_mtu can validate a
  new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)

hsr:
- min_mtu = 0 (calls ether_setup, max_mtu is 1500)

f_phonet:
- min_mtu = 6, max_mtu = 65541

u_ether:
- min_mtu = 14, max_mtu = 15412

phonet/pep-gprs:
- min_mtu = 576, max_mtu = 65530
- remove redundant gprs_set_mtu

CC: netdev@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: Stefan Richter 
CC: Faisal Latif 
CC: linux-rdma@vger.kernel.org
CC: Cliff Whickman 
CC: Robin Holt 
CC: Jes Sorensen 
CC: Marek Lindner 
CC: Simon Wunderlich 
CC: Antonio Quartulli 
CC: Sathya Prakash 
CC: Chaitra P B 
CC: Suganath Prabu Subramani 
CC: MPT-FusionLinux.pdl@broadcom.com
CC: Sebastian Reichel 
CC: Felipe Balbi 
CC: Arvid Brodin 
CC: Remi Denis-Courmont 
Signed-off-by: Jarod Wilson 
Signed-off-by: David S. Miller

PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use

2014-08-12T18:15:14+00:00

We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines.  This issue was reported by checkpatch.

A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):

// 

@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@

- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;

// 

[bhelgaas: add semantic patch]
Signed-off-by: Benoit Taine 
Signed-off-by: Bjorn Helgaas

drivers/net: delete non-required instances of include

2014-01-16T19:53:26+00:00

None of these files are actually using any __init type directives
and hence don't need to include .   Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

This covers everything under drivers/net except for wireless, which
has been submitted separately.

Signed-off-by: Paul Gortmaker 
Signed-off-by: David S. Miller

net: hippi: remove unnecessary pci_set_drvdata()

2013-12-11T03:31:32+00:00

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han 
Signed-off-by: David S. Miller

net/hippi/rrunner: Use module_pci_driver to register driver

2013-05-22T21:35:05+00:00

Removing some boilerplate by using module_pci_driver instead of calling
register and unregister in the otherwise empty init/exit functions.

Signed-off-by: Peter Huewe 
Signed-off-by: David S. Miller

rrunner.c: fix possible memory leak in rr_init_one()

2013-03-10T20:42:23+00:00

In the event that register_netdev() failed, the rrpriv->evt_ring
allocation would have not been freed.

Signed-off-by: David Oostdyk 
Signed-off-by: David S. Miller

drivers/net/hippi: remove depends on CONFIG_EXPERIMENTAL

2013-01-22T20:01:34+00:00

The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Jes Sorensen 
Acked-by: David S. Miller 
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

drivers/net: fix up function prototypes after __dev* removals

2012-12-07T19:22:22+00:00

The __dev* removal patches for the network drivers ended up messing up
the function prototypes for a bunch of drivers.  This patch fixes all of
them back up to be properly aligned.

Bonus is that this almost removes 100 lines of code, always a nice
surprise.

Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: David S. Miller

hippi: remove __dev* attributes

2012-12-03T19:16:56+00:00

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton 
Cc: Jes Sorensen 
Cc: linux-hippi@sunsite.dk
Signed-off-by: Greg Kroah-Hartman