linux-toradex.git/drivers/net/hyperv/netvsc.c, branch v4.19

hv_netvsc: pair VF based on serial number

2018-09-17T14:59:41+00:00

Matching network device based on MAC address is problematic
since a non VF network device can be creted with a duplicate MAC
address causing confusion and problems.  The VMBus API does provide
a serial number that is a better matching method.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

hv_netvsc: Fix napi reschedule while receive completion is busy

2018-07-18T22:23:30+00:00

If out ring is full temporarily and receive completion cannot go out,
we may still need to reschedule napi if certain conditions are met.
Otherwise the napi poll might be stopped forever, and cause network
disconnect.

Fixes: 7426b1a51803 ("netvsc: optimize receive completions")
Signed-off-by: Stephen Hemminger 
Signed-off-by: Haiyang Zhang 
Signed-off-by: David S. Miller

hv_netvsc: split sub-channel setup into async and sync

2018-06-30T12:28:36+00:00

When doing device hotplug the sub channel must be async to avoid
deadlock issues because device is discovered in softirq context.

When doing changes to MTU and number of channels, the setup
must be synchronous to avoid races such as when MTU and device
settings are done in a single ip command.

Reported-by: Thomas Walker 
Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug")
Fixes: 732e49850c5e ("netvsc: fix race on sub channel creation")
Signed-off-by: Stephen Hemminger 
Signed-off-by: Haiyang Zhang 
Signed-off-by: David S. Miller

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-06-10T20:01:12+00:00

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
  xfcp, hisi_sas, cxlflash, qla2xxx.

  In the absence of Nic, we're also taking target updates which are
  mostly minor except for the tcmu refactor.

  The only real core change to worry about is the removal of high page
  bouncing (in sas, storvsc and iscsi). This has been well tested and no
  problems have shown up so far"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
  scsi: lpfc: update driver version to 12.0.0.4
  scsi: lpfc: Fix port initialization failure.
  scsi: lpfc: Fix 16gb hbas failing cq create.
  scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
  scsi: lpfc: correct oversubscription of nvme io requests for an adapter
  scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
  scsi: hisi_sas: Mark PHY as in reset for nexus reset
  scsi: hisi_sas: Fix return value when get_free_slot() failed
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
  scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
  ...

hv_netvsc: simplify receive side calling arguments

2018-04-27T18:46:26+00:00

The calls up from the napi poll reading the receive ring had many
places where an argument was being recreated. I.e the caller already
had the value and wasn't passing it, then the callee would use
known relationship to determine the same value. Simpler and faster
to just pass arguments needed.

Also, add const in a couple places where message is being only read.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

hv_netvsc: Add NetVSP v6 and v6.1 into version negotiation

2018-04-19T01:20:44+00:00

This patch adds the NetVSP v6 and 6.1 message structures, and includes
these versions into NetVSC/NetVSP version negotiation process.

Signed-off-by: Haiyang Zhang 
Signed-off-by: David S. Miller

scsi: netvsc: Use the vmbus function to calculate ring buffer percentage

2018-04-18T23:32:52+00:00

In Vmbus, we have defined a function to calculate available ring buffer
percentage to write.

Use that function and remove netvsc's private version.

[mkp: typo]

Signed-off-by: Long Li 
Acked-by: David S. Miller 
Signed-off-by: Martin K. Petersen

hv_netvsc: Pass net_device parameter to revoke and teardown functions

2018-04-06T02:21:00+00:00

The callers to netvsc_revoke_*_buf() and netvsc_teardown_*_gpadl()
already have their net_device instances. Pass them as a paramaeter to
the function instead of obtaining them from netvsc_device struct
everytime

Signed-off-by: Mohammed Gamal 
Signed-off-by: David S. Miller

hv_netvsc: Ensure correct teardown message sequence order

2018-04-06T02:21:00+00:00

Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split")
the call sequence in netvsc_device_remove() was as follows (as
implemented in netvsc_destroy_buf()):
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Teardown receive buffer GPADL
3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
4- Teardown send buffer GPADL
5- Close vmbus

This didn't work for WS2016 hosts. Commit 0cf737808ae7
("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the
teardown sequence as follows:
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Close vmbus
4- Teardown receive buffer GPADL
5- Teardown send buffer GPADL

That worked well for WS2016 hosts, but it prevented guests on older hosts from
shutting down after changing network settings. Commit 0ef58b0a05c1
("hv_netvsc: change GPAD teardown order on older versions") ensured the
following message sequence for older hosts
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Teardown receive buffer GPADL
4- Teardown send buffer GPADL
5- Close vmbus

However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the
process becomes uninterruptible. On futher analysis it turns out that on tearing
down the receive buffer GPADL the kernel is waiting indefinitely
in vmbus_teardown_gpadl() for a completion to be signaled.

Here is a snippet of where this occurs:
int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
{
        struct vmbus_channel_gpadl_teardown *msg;
        struct vmbus_channel_msginfo *info;
        unsigned long flags;
        int ret;

        info = kmalloc(sizeof(*info) +
                       sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
        if (!info)
                return -ENOMEM;

        init_completion(&info->waitevent);
        info->waiting_channel = channel;
[....]
        ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
                             true);

        if (ret)
                goto post_msg_err;

        wait_for_completion(&info->waitevent);
[....]
}

The completion is signaled from vmbus_ongpadl_torndown(), which gets called when
the corresponding message is received from the host, which apparently never happens
in that case.
This patch works around the issue by restoring the first mentioned message sequence
for older hosts

Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal 
Signed-off-by: David S. Miller

hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl()

2018-04-06T02:21:00+00:00

Split each of the functions into two for each of send/recv buffers.
This will be needed in order to implement a fine-grained messaging
sequence to the host so that we accommodate the requirements of
different Windows versions

Fixes: 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal 
Signed-off-by: David S. Miller