linux-toradex.git/drivers/net/ipa, branch v5.10-rc3

net: ipa: command payloads already mapped

2020-10-24T01:28:52+00:00

IPA transactions describe actions to be performed by the IPA
hardware.  Three cases use IPA transactions:  transmitting a socket
buffer; providing a page to receive packet data; and issuing an IPA
immediate command.  An IPA transaction contains a scatter/gather
list (SGL) to hold the set of actions to be performed.

We map buffers in the SGL for DMA at the time they are added to the
transaction.  For skb TX transactions, we fill the SGL with a call
to skb_to_sgvec().  Page RX transactions involve a single page
pointer, and that is recorded in the SGL with sg_set_page().  In
both of these cases we then map the SGL for DMA with a call to
dma_map_sg().

Immediate commands are different.  The payload for an immediate
command comes from a region of coherent DMA memory, which must
*not* be mapped for DMA.  For that reason, gsi_trans_cmd_add()
sort of hand-crafts each SGL entry added to a command transaction.

This patch fixes a problem with the code that crafts the SGL entry
for an immediate command.  Previously a portion of the SGL entry was
updated using sg_set_buf().  However this is not valid because it
includes a call to virt_to_page() on the buffer, but the command
buffer pointer is not a linear address.

Since we never actually map the SGL for command transactions, there
are very few fields in the SGL we need to fill.  Specifically, we
only need to record the DMA address and the length, so they can be
used by __gsi_trans_commit() to fill a TRE.  We additionally need to
preserve the SGL flags so for_each_sg() still works.  For that we
can simply assign a null page pointer for command SGL entries.

Fixes: 9dd441e4ed575 ("soc: qcom: ipa: GSI transactions")
Reported-by: Stephen Boyd 
Tested-by: Stephen Boyd 
Signed-off-by: Alex Elder 
Link: https://lore.kernel.org/r/20201022010029.11877-1-elder@linaro.org
Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-10-15T19:43:21+00:00

Minor conflicts in net/mptcp/protocol.h and
tools/testing/selftests/net/Makefile.

In both cases code was added on both sides in the same place
so just keep both.

Signed-off-by: Jakub Kicinski

net: ipa: skip suspend/resume activities if not set up

2020-10-09T23:04:07+00:00

When processing a system suspend request we suspend modem endpoints
if they are enabled, and call ipa_cmd_tag_process() (which issues
IPA commands) to ensure the IPA pipeline is cleared.  It is an error
to attempt to issue an IPA command before setup is complete, so this
is clearly a bug.  But we also shouldn't suspend or resume any
endpoints that have not been set up.

Have ipa_endpoint_suspend() and ipa_endpoint_resume() immediately
return if setup hasn't completed, to avoid any attempt to configure
endpoints or issue IPA commands in that case.

Fixes: 84f9bd12d46d ("soc: qcom: ipa: IPA endpoints")
Tested-by: Matthias Kaehlcke 
Signed-off-by: Alex Elder 
Signed-off-by: Jakub Kicinski

net: ipa: fix two comments

2020-09-29T01:34:56+00:00

In ipa_uc_response_hdlr() a comment uses the wrong function name
when it describes where a clock reference is taken.  Fix this.

Also fix the comment in ipa_uc_response_hdlr() to correctly refer to
ipa_uc_setup(), which is where the clock reference described here is
taken.

Signed-off-by: Alex Elder 
Signed-off-by: David S. Miller

net: ipa: rename a phandle variable

2020-09-29T01:34:56+00:00

When "W=2" is supplied to the build command, we get a warning about
shadowing a global declaration (of a typedef) for a variable defined
in ipa_probe().  Rename the variable to get rid of the warning.

Signed-off-by: Alex Elder 
Signed-off-by: David S. Miller

net: ipa: fix two mild warnings

2020-09-29T01:34:56+00:00

Fix two spots where a variable "channel_id" is unnecessarily
redefined inside loops in "gsi.c".  This is warned about if
"W=2" is added to the build command.

Note that this problem is harmless, so there's no need to backport
it as a bugfix.

Remove a comment in gsi_init() about waking the system; the GSI
interrupt does not wake the system any more.

Signed-off-by: Alex Elder 
Signed-off-by: David S. Miller

net: ipa: share field mask values for GSI general interrupt

2020-09-29T01:34:56+00:00

The GSI general interrupt is managed by three registers: enable;
status; and clear.  The three registers have same set of field bits
at the same locations.  Use a common set of field masks for all
three registers to avoid duplication.

Signed-off-by: Alex Elder 
Signed-off-by: David S. Miller

net: ipa: share field mask values for GSI global interrupt

2020-09-29T01:34:56+00:00

The GSI global interrupt is managed by three registers: enable;
status; and clear.  The three registers have same set of field bits
at the same locations.  Use a common set of field masks for all
three registers to avoid duplication.

Signed-off-by: Alex Elder 
Signed-off-by: David S. Miller

net: ipa: share field mask values for GSI interrupt type

2020-09-29T01:34:56+00:00

The GSI interrupt type register and interrupt type mask register
have the same field bits at the same locations.  Use a common set of
field masks for both registers rather than essentially duplicating
them.  The only place the interrupt mask register uses any of these
is in gsi_irq_enable().

Signed-off-by: Alex Elder 
Signed-off-by: David S. Miller

net: ipa: remove unused status structure field masks

2020-09-29T01:34:55+00:00

Most of the field masks used for fields in a status structure are
unused.  Remove their definitions; we can add them back again when
we actually use them to handle arriving status messages.  These are
warned about if "W=2" is added to the build command.

Signed-off-by: Alex Elder 
Signed-off-by: David S. Miller