linux-toradex.git/drivers/net/ipvlan, branch v4.10

ipvlan: fix multicast processing

2016-12-23T22:53:47+00:00

In an IPvlan setup when master is set in loopback mode e.g.

  ethtool -K eth0 set loopback on

  where eth0 is master device for IPvlan setup.

The failure is caused by the faulty logic that determines if the
packet is from TX-path vs. RX-path by just looking at the mac-
addresses on the packet while processing multicast packets.

In the loopback-mode where this crash was happening, the packets
that are sent out are reflected by the NIC and are processed on
the RX path, but mac-address check tricks into thinking this
packet is from TX path and falsely uses dev_forward_skb() to pass
packets to the slave (virtual) devices.

This patch records the path while queueing packets and eliminates
logic of looking at mac-addresses for the same decision.

------------[ cut here ]------------
kernel BUG at include/linux/skbuff.h:1737!
Call Trace:
 [] dev_forward_skb+0x92/0xd0
 [] ipvlan_process_multicast+0x395/0x4c0 [ipvlan]
 [] ? ipvlan_process_multicast+0xd7/0x4c0 [ipvlan]
 [] ? process_one_work+0x147/0x660
 [] process_one_work+0x1a9/0x660
 [] ? process_one_work+0x147/0x660
 [] worker_thread+0x11d/0x360
 [] ? rescuer_thread+0x350/0x350
 [] kthread+0xdb/0xe0
 [] ? _raw_spin_unlock_irq+0x30/0x50
 [] ? flush_kthread_worker+0xc0/0xc0
 [] ret_from_fork+0x9a/0xd0
 [] ? flush_kthread_worker+0xc0/0xc0

Fixes: ba35f8588f47 ("ipvlan: Defer multicast / broadcast processing to a work-queue")
Signed-off-by: Mahesh Bandewar 
CC: Eric Dumazet 
Signed-off-by: David S. Miller

ipvlan: fix various issues in ipvlan_process_multicast()

2016-12-23T22:53:47+00:00

1) netif_rx() / dev_forward_skb() should not be called from process
context.

2) ipvlan_count_rx() should be called with preemption disabled.

3) We should check if ipvlan->dev is up before feeding packets
to netif_rx()

4) We need to prevent device from disappearing if some packets
are in the multicast backlog.

5) One kfree_skb() should be a consume_skb() eventually

Fixes: ba35f8588f47 ("ipvlan: Defer multicast / broadcast processing to
a work-queue")
Signed-off-by: Eric Dumazet 
Cc: Mahesh Bandewar 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-12-10T21:21:55+00:00

driver: ipvlan: Unlink the upper dev when ipvlan_link_new failed

2016-12-08T19:30:07+00:00

When netdev_upper_dev_unlink failed in ipvlan_link_new, need to
unlink the ipvlan dev with upper dev.

Signed-off-by: Gao Feng 
Acked-by: Mahesh Bandewar 
Signed-off-by: David S. Miller

driver: ipvlan: Free ipvl_port directly with kfree instead of kfree_rcu

2016-12-07T18:21:21+00:00

There are two functions which would free the ipvl_port now. The first
is ipvlan_port_create. It frees the ipvl_port in the error handler,
so it could kfree it directly. The second is ipvlan_port_destroy. It
invokes netdev_rx_handler_unregister which enforces one grace period
by synchronize_net firstly, so it also could kfree the ipvl_port
directly and safely.

So it is unnecessary to use kfree_rcu to free ipvl_port.

Signed-off-by: Gao Feng 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-12-03T17:29:53+00:00

Couple conflicts resolved here:

1) In the MACB driver, a bug fix to properly initialize the
   RX tail pointer properly overlapped with some changes
   to support variable sized rings.

2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix
   overlapping with a reorganization of the driver to support
   ACPI, OF, as well as PCI variants of the chip.

3) In 'net' we had several probe error path bug fixes to the
   stmmac driver, meanwhile a lot of this code was cleaned up
   and reorganized in 'net-next'.

4) The cls_flower classifier obtained a helper function in
   'net-next' called __fl_delete() and this overlapped with
   Daniel Borkamann's bug fix to use RCU for object destruction
   in 'net'.  It also overlapped with Jiri's change to guard
   the rhashtable_remove_fast() call with a check against
   tc_skip_sw().

5) In mlx4, a revert bug fix in 'net' overlapped with some
   unrelated changes in 'net-next'.

6) In geneve, a stale header pointer after pskb_expand_head()
   bug fix in 'net' overlapped with a large reorganization of
   the same code in 'net-next'.  Since the 'net-next' code no
   longer had the bug in question, there was nothing to do
   other than to simply take the 'net-next' hunks.

Signed-off-by: David S. Miller

driver: ipvlan: Remove useless member mtu_adj of struct ipvl_dev

2016-11-30T20:01:32+00:00

The mtu_adj is initialized to zero when alloc mem, there is no any
assignment to mtu_adj. It is only used in ipvlan_adjust_mtu as one
right value.
So it is useless member of struct ipvl_dev, then remove it.

Signed-off-by: Gao Feng 
Signed-off-by: David S. Miller

driver: ipvlan: Fix one possible memleak in ipvlan_link_new

2016-11-28T00:58:04+00:00

When ipvlan_link_new fails and creates one ipvlan port, it does not
destroy the ipvlan port created. It causes mem leak and the physical
device contains invalid ipvlan data.

Signed-off-by: Gao Feng 
Signed-off-by: David S. Miller

ipvlan: constify l3mdev_ops structure

2016-10-15T21:49:57+00:00

This l3mdev_ops structure is only stored in the l3mdev_ops field of a
net_device structure.  This field is declared const, so the l3mdev_ops
structure can be declared as const also.  Additionally drop the
__read_mostly annotation.

The semantic patch that adds const is as follows:
(http://coccinelle.lip6.fr/)

// 
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct l3mdev_ops i@p = { ... };

@ok@
identifier r.i;
struct net_device *e;
position p;
@@
e->l3mdev_ops = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct l3mdev_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct l3mdev_ops i = { ... };
// 

The effect on the layout of the .o file is shown by the following output
of the size command, first before then after the transformation:

   text    data     bss     dec     hex filename
   7364     466      52    7882    1eca drivers/net/ipvlan/ipvlan_main.o
   7412     434      52    7898    1eda drivers/net/ipvlan/ipvlan_main.o

Signed-off-by: Julia Lawall 
Signed-off-by: David S. Miller

ipvlan: Introduce l3s mode

2016-09-19T05:25:22+00:00

In a typical IPvlan L3 setup where master is in default-ns and
each slave is into different (slave) ns. In this setup egress
packet processing for traffic originating from slave-ns will
hit all NF_HOOKs in slave-ns as well as default-ns. However same
is not true for ingress processing. All these NF_HOOKs are
hit only in the slave-ns skipping them in the default-ns.
IPvlan in L3 mode is restrictive and if admins want to deploy
iptables rules in default-ns, this asymmetric data path makes it
impossible to do so.

This patch makes use of the l3_rcv() (added as part of l3mdev
enhancements) to perform input route lookup on RX packets without
changing the skb->dev and then uses nf_hook at NF_INET_LOCAL_IN
to change the skb->dev just before handing over skb to L4.

Signed-off-by: Mahesh Bandewar 
CC: David Ahern 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller