linux-toradex.git/drivers/net/irda, branch v2.6.21.6

[ARM] 4295/2: Fix error-handling in pxaficp_ir.c (version 2)

2007-04-01T21:38:01+00:00

This patch addresses the following issues with the pxa2xx FIr driver:

1. increment overrun error counter and not frame error counter on ICSR1_ROR bit set in ICSR1.
2. drop frames reported with the frame error from the IC.
3. when resetting the receiver and preparing it for the next DMA in pxa_irda_fir_irq() actually clear the Rx FIFO. See description in Table 11-2 in PXA270 Developer's Manual of the RXE bit.

Correction added in version 2: clearing the IC Rx FIFO also has to be done in pxa_irda_fir_dma_tx_irq()

Signed-off-by: G. Liakhovetski 
Signed-off-by: Russell King

[IrDA]: Delay needed when uploading firmware chunks

2007-03-20T07:09:40+00:00

With 42101001.sb firmwares, we need a 10 ms delay between firmware chunks
upload on irda-usb.

Patch from Nigel Williams 
Signed-off-by: Samuel Ortiz 
Signed-off-by: David S. Miller

[PATCH] remove many unneeded #includes of sched.h

2007-02-14T16:09:54+00:00

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau 
Acked-by: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] mark struct file_operations const 5

2007-02-12T17:48:45+00:00

Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[IRDA] vlsi_ir.{h,c}: remove kernel 2.4 code

2007-01-24T05:16:40+00:00

This patch removes kernel 2.4 compatibility code.

Signed-off-by: Adrian Bunk 
Acked-by: Samuel Ortiz 
Signed-off-by: David S. Miller

[IrDA]: Removed incorrect IRDA_ASSERT()

2007-01-24T04:25:50+00:00

With USB2.0 bulk out MTU can be 512 bytes, so checking it only for 64
bytes is incorrect.

Signed-off-by: Samuel Ortiz 
Signed-off-by: David S. Miller

[IrDA]: irda-usb TX path optimization (was Re: IrDA spams logfiles - since 2.6.19)

2007-01-24T04:25:49+00:00

Since we stop using dev_alloc_skb on the IrDA TX frame, we constantly run
into the case of the skb headroom being 0, and thus we call skb_cow for
every IrDA TX frame.
This patch uses a local buffer and memcpy the skb to it, saving us a
kmalloc for each of those IrDA TX frames.

Signed-off-by: Samuel Ortiz 
Signed-off-by: David S. Miller

[PATCH] email change for shemminger@osdl.org

2007-01-23T22:18:49+00:00

Change my email address to reflect OSDL merger.

Signed-off-by: Stephen Hemminger 
[ The irony. Somebody still has his sign-off message hardcoded
  in a script or his brainstem ;^]
Signed-off-by: Linus Torvalds

[PATCH] getting rid of all casts of k[cmz]alloc() calls

2006-12-13T17:05:58+00:00

Run this:

	#!/bin/sh
	for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do
	  echo "De-casting $f..."
	  perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f
	done

And then go through and reinstate those cases where code is casting pointers
to non-pointers.

And then drop a few hunks which conflicted with outstanding work.

Cc: Russell King , Ian Molton 
Cc: Mikael Starvik 
Cc: Yoshinori Sato 
Cc: Roman Zippel 
Cc: Geert Uytterhoeven 
Cc: Ralf Baechle 
Cc: Paul Mackerras 
Cc: Kyle McMartin 
Cc: Benjamin Herrenschmidt 
Cc: Martin Schwidefsky 
Cc: "David S. Miller" 
Cc: Jeff Dike 
Cc: Greg KH 
Cc: Jens Axboe 
Cc: Paul Fulghum 
Cc: Alan Cox 
Cc: Karsten Keil 
Cc: Mauro Carvalho Chehab 
Cc: Jeff Garzik 
Cc: James Bottomley 
Cc: Ian Kent 
Cc: Steven French 
Cc: David Woodhouse 
Cc: Neil Brown 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] tty: switch to ktermios

2006-12-08T16:28:57+00:00

This is the grungy swap all the occurrences in the right places patch that
goes with the updates.  At this point we have the same functionality as
before (except that sgttyb() returns speeds not zero) and are ready to
begin turning new stuff on providing nobody reports lots of bugs

If you are a tty driver author converting an out of tree driver the only
impact should be termios->ktermios name changes for the speed/property
setting functions from your upper layers.

If you are implementing your own TCGETS function before then your driver
was broken already and its about to get a whole lot more painful for you so
please fix it 8)

Also fill in c_ispeed/ospeed on init for most devices, although the current
code will do this for you anyway but I'd like eventually to lose that extra
paranoia

[akpm@osdl.org: bluetooth fix]
[mp3@de.ibm.com: sclp fix]
[mp3@de.ibm.com: warning fix for tty3270]
[hugh@veritas.com: fix tty_ioctl powerpc build]
[jdike@addtoit.com: uml: fix ->set_termios declaration]
Signed-off-by: Alan Cox 
Signed-off-by: Martin Peschke 
Acked-by: Peter Oberparleiter 
Cc: Cornelia Huck 
Signed-off-by: Hugh Dickins 
Signed-off-by: Jeff Dike 
Cc: Paolo 'Blaisorblade' Giarrusso 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds