linux-toradex.git/drivers/net/mctp, branch v6.11

net: mctp-serial: Fix missing escapes on transmit

2024-09-01T17:14:01+00:00

0x7d and 0x7e bytes are meant to be escaped in the data portion of
frames, but this didn't occur since next_chunk_len() had an off-by-one
error. That also resulted in the final byte of a payload being written
as a separate tty write op.

The chunk prior to an escaped byte would be one byte short, and the
next call would never test the txpos+1 case, which is where the escaped
byte was located. That meant it never hit the escaping case in
mctp_serial_tx_work().

Example Input: 01 00 08 c8 7e 80 02

Previous incorrect chunks from next_chunk_len():

01 00 08
c8 7e 80
02

With this fix:

01 00 08 c8
7e
80 02

Cc: stable@vger.kernel.org
Fixes: a0c2ccd9b5ad ("mctp: Add MCTP-over-serial transport binding")
Signed-off-by: Matt Johnston 
Signed-off-by: David S. Miller

net: mctp-serial: Add kunit test for next_chunk_len()

2024-09-01T17:14:01+00:00

Test various edge cases of inputs that contain characters
that need escaping.

This adds a new kunit suite for mctp-serial.

Signed-off-by: Matt Johnston 
Signed-off-by: David S. Miller

net: mctp-i2c: invalidate flows immediately on TX errors

2024-07-12T12:37:31+00:00

If we encounter an error on i2c packet transmit, we won't have a valid
flow anymore; since we didn't transmit a valid packet sequence, we'll
have to wait for the key to timeout instead of dropping it on the reply.

This causes the i2c lock to be held for longer than necessary.

Instead, invalidate the flow on TX error, and release the i2c lock
immediately.

Cc: Bonnie Lo 
Tested-by: Jerry C Chen 
Signed-off-by: Jeremy Kerr 
Signed-off-by: David S. Miller

net: Drop explicit initialization of struct i2c_device_id::driver_data to 0

2024-06-26T14:28:08+00:00

These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.

While add it, also remove commas after the sentinel entries.

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Petr Machata  # For mlxsw
Reviewed-by: Kory Maincent 
Reviewed-by: Jeremy Kerr  # for mctp-i2c
Reviewed-by: Oleksij Rempel 
Acked-by: Oleksij Rempel 
Link: https://patch.msgid.link/20240625083853.2205977-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski

mctp i3c: MCTP I3C driver

2023-10-17T10:45:03+00:00

Provides MCTP network transport over an I3C bus, as specified in
DMTF DSP0233.

Each I3C bus (with "mctp-controller" devicetree property) gets an
"mctpi3cX" net device created. I3C devices are reachable as remote
endpoints through that net device. Link layer addressing uses the
I3C PID as a fixed hardware address for neighbour table entries.

The driver matches I3C devices that have the MIPI assigned DCR 0xCC for
MCTP.

Signed-off-by: Matt Johnston 
Reviewed-by: Simon Horman 
Signed-off-by: Paolo Abeni

tty: use u8 for flags

2023-08-11T19:12:45+00:00

This makes all those 'char's an explicit 'u8'. This is part of the
continuing unification of chars and flags to be consistent u8.

This approaches tty_port_default_receive_buf().

Note that we do not change signedness as we compile with
-funsigned-char.

Signed-off-by: "Jiri Slaby (SUSE)" 
Cc: William Hubbs 
Cc: Chris Brannon 
Cc: Kirk Reiser 
Cc: Samuel Thibault 
Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Cc: Dmitry Torokhov 
Cc: Arnd Bergmann 
Cc: "David S. Miller" 
Cc: Eric Dumazet 
Cc: Jakub Kicinski 
Cc: Paolo Abeni 
Cc: Max Staudt 
Cc: Wolfgang Grandegger 
Cc: Marc Kleine-Budde 
Cc: Dario Binacchi 
Cc: Andreas Koensgen 
Cc: Jeremy Kerr 
Cc: Matt Johnston 
Cc: Krzysztof Kozlowski 
Cc: Liam Girdwood 
Cc: Mark Brown 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Acked-by: Mark Brown 
Link: https://lore.kernel.org/r/20230810091510.13006-18-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman

tty: use u8 for chars

2023-08-11T19:12:45+00:00

This makes all those 'unsigned char's an explicit 'u8'. This is part of
the continuing unification of chars and flags to be consistent u8.

This approaches tty_port_default_receive_buf(). Flags to be next.

Signed-off-by: "Jiri Slaby (SUSE)" 
Cc: William Hubbs 
Cc: Chris Brannon 
Cc: Kirk Reiser 
Cc: Samuel Thibault 
Cc: Dmitry Torokhov 
Cc: Arnd Bergmann 
Cc: Max Staudt 
Cc: Wolfgang Grandegger 
Cc: Marc Kleine-Budde 
Cc: "David S. Miller" 
Cc: Eric Dumazet 
Cc: Jakub Kicinski 
Cc: Paolo Abeni 
Cc: Dario Binacchi 
Cc: Andreas Koensgen 
Cc: Jeremy Kerr 
Cc: Matt Johnston 
Cc: Liam Girdwood 
Cc: Mark Brown 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Cc: Peter Ujfalusi 
Acked-by: Mark Brown 
Link: https://lore.kernel.org/r/20230810091510.13006-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman

tty: make tty_ldisc_ops::buf() hooks operate on size_t

2023-08-11T19:12:45+00:00

Count passed to tty_ldisc_ops::receive_buf*(), ::lookahead_buf(), and
returned from ::receive_buf2() is expected to be size_t. So set it to
size_t to unify with the rest of the code.

Signed-off-by: "Jiri Slaby (SUSE)" 
Cc: William Hubbs 
Cc: Chris Brannon 
Cc: Kirk Reiser 
Cc: Samuel Thibault 
Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Cc: Dmitry Torokhov 
Cc: Arnd Bergmann 
Cc: "David S. Miller" 
Cc: Eric Dumazet 
Cc: Jakub Kicinski 
Cc: Paolo Abeni 
Cc: Max Staudt 
Cc: Wolfgang Grandegger 
Cc: Marc Kleine-Budde 
Cc: Dario Binacchi 
Cc: Andreas Koensgen 
Cc: Jeremy Kerr 
Cc: Matt Johnston 
Cc: Krzysztof Kozlowski 
Cc: Liam Girdwood 
Cc: Mark Brown 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Acked-by: Mark Brown 
Link: https://lore.kernel.org/r/20230810091510.13006-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman

mctp i2c: Switch back to use struct i2c_driver's .probe()

2023-06-14T03:46:20+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230612071641.836976-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski

mctp: serial: Fix starting value for frame check sequence

2022-12-19T12:38:45+00:00

RFC1662 defines the start state for the crc16 FCS to be 0xffff, but
we're currently starting at zero.

This change uses the correct start state. We're only early in the
adoption for the serial binding, so there aren't yet any other users to
interface to.

Fixes: a0c2ccd9b5ad ("mctp: Add MCTP-over-serial transport binding")
Reported-by: Harsh Tyagi 
Tested-by: Harsh Tyagi 
Signed-off-by: Jeremy Kerr 
Reviewed-by: Alexander Duyck 
Signed-off-by: David S. Miller

linux-toradex.git/drivers/net/mctp, branch v6.11

net: mctp-serial: Fix missing escapes on transmit

net: mctp-serial: Add kunit test for next_chunk_len()

net: mctp-i2c: invalidate flows immediately on TX errors

net: Drop explicit initialization of struct i2c_device_id::driver_data to 0

mctp i3c: MCTP I3C driver

tty: use u8 for flags

tty: use u8 for chars

tty: make tty_ldisc_ops::*buf*() hooks operate on size_t

mctp i2c: Switch back to use struct i2c_driver's .probe()

mctp: serial: Fix starting value for frame check sequence

tty: make tty_ldisc_ops::buf() hooks operate on size_t