linux-toradex.git/drivers/net/netdevsim/netdevsim.h, branch v6.0-rc1

netdevsim: convert driver to use unlocked devlink API during init/fini

2022-07-19T03:10:48+00:00

Prepare for devlink reload being called with devlink->lock held and
convert the netdevsim driver to use unlocked devlink API during init and
fini flows. Take devl_lock() in reload_down() and reload_up() ops in the
meantime before reload cmd is converted to take the lock itself.

Signed-off-by: Jiri Pirko 
Signed-off-by: Jakub Kicinski

netdevsim: replace vfs_lock with devlink instance lock

2022-03-21T14:11:38+00:00

Similarly to the previous commit, use the devlink instance
lock and let it replace the vfs_lock.

nsim_esw_legacy_enable() was locked by both port lock and
vfs lock so one set of lock/unlocks goes away.

netdevsim's .eswitch_mode_set callback is now ready for
the callback to take the instance lock.

Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller

netdevsim: replace port_list_lock with devlink instance lock

2022-03-21T14:11:38+00:00

Take advantage of the devlink instance lock for protecting
the port list. This will simplify locking even more once
all devlink callbacks hold the instance lock.

We need to add locking in nsim_dev_port_add_all() which used
to assume higher layer protection when accessing the list.

Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller

netdevsim: Introduce support for L3 offload xstats

2022-03-15T13:00:51+00:00

Add support for testing of HW stats support that was added recently, namely
the L3 stats support. L3 stats are provided for devices for which the L3
stats have been turned on, and that were enabled for netdevsim through a
debugfs toggle:

    # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex

For fully enabled netdevices, netdevsim counts 10pps of ingress traffic and
20pps of egress traffic. Similarly, L3 stats can be disabled for a given
device, and netdevsim ceases pretending there is any HW traffic going on:

    # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex

Besides this, there is a third toggle to mark a device for future failure:

    # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable

A future request to enable L3 stats on such netdevice will be bounced by
netdevsim:

    # ip -j l sh dev d | jq '.[].ifindex'
    66
    # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/enable_ifindex
    # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/fail_next_enable
    # ip stats set dev d l3_stats on
    Error: netdevsim: Stats enablement set to fail.

Signed-off-by: Petr Machata 
Reviewed-by: Ido Schimmel 
Acked-by: Jakub Kicinski 
Signed-off-by: Paolo Abeni

netdevsim: rename 'driver' entry points

2021-11-01T13:29:41+00:00

Rename functions serving as driver entry points
from nsim_dev_... to nsim_drv_... this makes the
API boundary between bus and dev clearer.

Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller

netdevsim: move max vf config to dev

2021-11-01T13:29:41+00:00

max_vfs is a strange little beast because the file
hangs off of nsim's debugfs, but it configures a field
in the bus device. Move it to dev.c, let's look at it
as if the device driver was imposing VF limit based
on FW info (like pci_sriov_set_totalvfs()).

Again, when moving refactor the function not to hold
the vfs lock pointlessly while parsing the input.
Wrap the access from the read side in READ_ONCE()
to appease concurrency checkers. Do not check if
return value from snprintf() is negative...

Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller

netdevsim: move details of vf config to dev

2021-11-01T13:29:41+00:00

Since "eswitch" configuration was added bus.c contains
a lot of device details which really belong to dev.c.

Restructure the code while moving it.

Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller

netdevsim: move vfconfig to nsim_dev

2021-11-01T13:29:41+00:00

When netdevsim got split into the faux bus vfconfig ended
up in the bus device (think pci_dev) which is strange because
it contains very networky not to say netdevy information.
Move it to nsim_dev, which is the driver "priv" structure
for the device.

To make sure we don't race with probe/remove take
the device lock (much like PCI).

While at it remove the NULL-checking of vfconfigs.
It appears to be pointless.

Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller

netdevsim: remove max_vfs dentry

2021-10-30T04:15:08+00:00

Commit d395381909a3 ("netdevsim: Add max_vfs to bus_dev")
added this file and saved the dentry for no apparent reason.

Link: https://lore.kernel.org/r/20211028211753.22612-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski

netdevsim: add ability to change channel count

2021-09-15T14:46:02+00:00

For testing visibility of mq/mqprio default children.

Signed-off-by: Jakub Kicinski 
Signed-off-by: David S. Miller