<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/net/phy/Makefile, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>net: phy: factor out legacy PHY fixup support and make it always built-in</title>
<updated>2026-09-19T00:26:25+00:00</updated>
<author>
<name>Heiner Kallweit</name>
<email>hkallweit1@gmail.com</email>
</author>
<published>2026-09-16T06:05:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f619d5003ff4e6e2c1ec456ab3aca5622587b5d7'/>
<id>f619d5003ff4e6e2c1ec456ab3aca5622587b5d7</id>
<content type='text'>
PHY fixup registration is used from platform code in init phase only.
Let's move the PHY fixup code from the modular part of phylib to the
always built-in part of phylib. This allows to annotate the fixup
registration as __init. No caller uses the return code of PHY fixup
registration, therefore change related functions to return void.

phy_needs_fixup() and phy_scan_fixups() wouldn't have to be moved to
the built-in part of phylib. But doing so allows to fully factor out
legacy fixup support into its own source code file, and make struct
phy_fixup and phy_fixup_list strictly private to phy_fixup.c.

phy_scan_fixups() is used after init phase only, then phy_fixup_list
is read-only. So we don't need the mutex when accessing the list.
Also when registering PHY fixups the mutex isn't needed, because
fixup registration is done sequentially from platform init code.
Actually there is only one platform with more than one fixup.

In addition this change lays the foundation for enabling modular
phylib on platforms where the fixup just sets a flag.

Last but not least reflect the change in the documentation,
and add a hint that fixup's are legacy functionality.

Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Signed-off-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Link: https://patch.msgid.link/2d722b84-a263-400b-ac91-bf37125eb85b@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
PHY fixup registration is used from platform code in init phase only.
Let's move the PHY fixup code from the modular part of phylib to the
always built-in part of phylib. This allows to annotate the fixup
registration as __init. No caller uses the return code of PHY fixup
registration, therefore change related functions to return void.

phy_needs_fixup() and phy_scan_fixups() wouldn't have to be moved to
the built-in part of phylib. But doing so allows to fully factor out
legacy fixup support into its own source code file, and make struct
phy_fixup and phy_fixup_list strictly private to phy_fixup.c.

phy_scan_fixups() is used after init phase only, then phy_fixup_list
is read-only. So we don't need the mutex when accessing the list.
Also when registering PHY fixups the mutex isn't needed, because
fixup registration is done sequentially from platform init code.
Actually there is only one platform with more than one fixup.

In addition this change lays the foundation for enabling modular
phylib on platforms where the fixup just sets a flag.

Last but not least reflect the change in the documentation,
and add a hint that fixup's are legacy functionality.

Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Signed-off-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Link: https://patch.msgid.link/2d722b84-a263-400b-ac91-bf37125eb85b@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: add X-Powers AC200/AC300 EPHY driver</title>
<updated>2026-09-15T01:44:00+00:00</updated>
<author>
<name>James Hilliard</name>
<email>james.hilliard1@gmail.com</email>
</author>
<published>2026-09-10T00:15:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=6cc2fbceb49be43e4280599162e2dd73d1b40fd9'/>
<id>6cc2fbceb49be43e4280599162e2dd73d1b40fd9</id>
<content type='text'>
The AC200 and AC300 contain compatible Fast Ethernet link PHYs, but the
link endpoint is inaccessible until package-specific control registers
have powered and configured it.

Add one PHY driver which binds the link child and joins its parent
Ethernet PHY package. Fixed package compatibles select the corresponding
backend. The generic ACx00 compatible reads one packed configuration field
and selects the backend before touching backend-specific resources. The
AC300 path therefore does not resolve or access the candidate AC200 I2C
device.

Require two returned NVMEM bytes for AC300 and selectable ACx00
packages before selecting the backend. Keep the existing little-endian
decoding and one-byte calibration support for fixed AC200 packages.

AC200 locates the I2C device referenced by the package and establishes a
managed device link. It verifies that the provider is fully bound under
the supplier device lock before retrieving the regmap attached to the I2C
device. The companion MFD provider enables and exclusively pins the input
clock rate while it is bound. The link keeps the supplier bound until the
PHY consumer has unbound. Firmware must make the selected AC200 provider
path available before the PHY probes.

AC300 uses the PHY package helpers to access the control range at base
address plus 16. Keeping both backends in the same module lets the common
link implementation own the complete PHY without registering artificial
control devices.

Obtain and manage the selected package supply and calibration, manage the
AC300 input clock, validate or program the link address, and apply the
required reset, clock, I/O and shutdown sequences. Start in the
hardware-default MII mode so the forced PHY device can probe before a MAC
attaches, then apply the MAC-provided MII or RMII mode before the normal
PHY soft reset. AC200 specifies no additional delay between its EPHY
controls; the provider's input-clock startup delay is already complete
before its regmap becomes available.

Apply the common vendor analog initialization, optional AC300
low-calibration tuning and board-selected receive-clock inversion. Keep
MDI/MDI-X in automatic mode. Preserve standard MAC-managed EEE support
while disabling the vendor PHY-autonomous Intelligent EEE mode. Restart
autonegotiation when restoring the standard EEE advertisement changes it.

Serialize package state and the multi-register power sequences across the
different phylib callback lock contexts. Power down the package control
block and its supply during PHY suspend, then restore them and the vendor
configuration during resume. If shutdown fails after resetting the PHY,
restore the vendor settings and standard advertisement or forced
speed/duplex under the phylib lock before returning the original error.
A failed suspend is not followed by a normal resume to restore these
settings. Power down again if recovery fails, and unwind package power if
reset, resume or configuration fails after power-on.

Signed-off-by: James Hilliard &lt;james.hilliard1@gmail.com&gt;
Link: https://patch.msgid.link/20260909-submit-acx00-of-dynamic-v1-v11-2-eb45e89ef918@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The AC200 and AC300 contain compatible Fast Ethernet link PHYs, but the
link endpoint is inaccessible until package-specific control registers
have powered and configured it.

Add one PHY driver which binds the link child and joins its parent
Ethernet PHY package. Fixed package compatibles select the corresponding
backend. The generic ACx00 compatible reads one packed configuration field
and selects the backend before touching backend-specific resources. The
AC300 path therefore does not resolve or access the candidate AC200 I2C
device.

Require two returned NVMEM bytes for AC300 and selectable ACx00
packages before selecting the backend. Keep the existing little-endian
decoding and one-byte calibration support for fixed AC200 packages.

AC200 locates the I2C device referenced by the package and establishes a
managed device link. It verifies that the provider is fully bound under
the supplier device lock before retrieving the regmap attached to the I2C
device. The companion MFD provider enables and exclusively pins the input
clock rate while it is bound. The link keeps the supplier bound until the
PHY consumer has unbound. Firmware must make the selected AC200 provider
path available before the PHY probes.

AC300 uses the PHY package helpers to access the control range at base
address plus 16. Keeping both backends in the same module lets the common
link implementation own the complete PHY without registering artificial
control devices.

Obtain and manage the selected package supply and calibration, manage the
AC300 input clock, validate or program the link address, and apply the
required reset, clock, I/O and shutdown sequences. Start in the
hardware-default MII mode so the forced PHY device can probe before a MAC
attaches, then apply the MAC-provided MII or RMII mode before the normal
PHY soft reset. AC200 specifies no additional delay between its EPHY
controls; the provider's input-clock startup delay is already complete
before its regmap becomes available.

Apply the common vendor analog initialization, optional AC300
low-calibration tuning and board-selected receive-clock inversion. Keep
MDI/MDI-X in automatic mode. Preserve standard MAC-managed EEE support
while disabling the vendor PHY-autonomous Intelligent EEE mode. Restart
autonegotiation when restoring the standard EEE advertisement changes it.

Serialize package state and the multi-register power sequences across the
different phylib callback lock contexts. Power down the package control
block and its supply during PHY suspend, then restore them and the vendor
configuration during resume. If shutdown fails after resetting the PHY,
restore the vendor settings and standard advertisement or forced
speed/duplex under the phylib lock before returning the original error.
A failed suspend is not followed by a normal resume to restore these
settings. Power down again if recovery fails, and unwind package power if
reset, resume or configuration fails after power-on.

Signed-off-by: James Hilliard &lt;james.hilliard1@gmail.com&gt;
Link: https://patch.msgid.link/20260909-submit-acx00-of-dynamic-v1-v11-2-eb45e89ef918@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: add DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY driver</title>
<updated>2026-08-10T22:30:25+00:00</updated>
<author>
<name>Artem Shimko</name>
<email>a.shimko.dev@gmail.com</email>
</author>
<published>2026-08-05T08:55:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=d90265e75584d0767aada5b900e6c82ac0f9d5b9'/>
<id>d90265e75584d0767aada5b900e6c82ac0f9d5b9</id>
<content type='text'>
Add a new PHY driver for the DAPU Telecom DAP8211R(I) Gigabit
Ethernet PHY, which is commonly used in enterprise and industrial
networking applications.

The driver implements extended register access via indirect addressing
through corresponding registers, and provides comprehensive device tree
support for RGMII delay configuration. The rx-internal-delay-ps and
tx-internal-delay-ps properties allow precise tuning of clock delays in
150 ps steps from 0 to 2250 ps.

Signed-off-by: Artem Shimko &lt;a.shimko.dev@gmail.com&gt;
Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Link: https://patch.msgid.link/20260805085540.452260-4-a.shimko.dev@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a new PHY driver for the DAPU Telecom DAP8211R(I) Gigabit
Ethernet PHY, which is commonly used in enterprise and industrial
networking applications.

The driver implements extended register access via indirect addressing
through corresponding registers, and provides comprehensive device tree
support for RGMII delay configuration. The rx-internal-delay-ps and
tx-internal-delay-ps properties allow precise tuning of clock delays in
150 ps steps from 0 to 2250 ps.

Signed-off-by: Artem Shimko &lt;a.shimko.dev@gmail.com&gt;
Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Link: https://patch.msgid.link/20260805085540.452260-4-a.shimko.dev@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: Add support for the ADIN1140 PHY</title>
<updated>2026-07-21T08:53:24+00:00</updated>
<author>
<name>Ciprian Regus</name>
<email>ciprian.regus@analog.com</email>
</author>
<published>2026-07-07T22:33:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0feaf415b7822b27ff60c2711fd345a0414a80f0'/>
<id>0feaf415b7822b27ff60c2711fd345a0414a80f0</id>
<content type='text'>
Add a driver for the ADIN1140's internal 10BASE-T1S PHY. The device
doesn't implement autonegotiation, so the link is always reported as
being up.

The device implements both C22 and C45 MDIO access methods, but can only
be discovered over C22, since the C45 MMD devices lack the MDIO_DEVID1 and
MDIO_DEVID2 registers. The indirect C45 over C22 feature is not
supported.

Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Signed-off-by: Ciprian Regus &lt;ciprian.regus@analog.com&gt;
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-12-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni &lt;pabeni@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a driver for the ADIN1140's internal 10BASE-T1S PHY. The device
doesn't implement autonegotiation, so the link is always reported as
being up.

The device implements both C22 and C45 MDIO access methods, but can only
be discovered over C22, since the C45 MMD devices lack the MDIO_DEVID1 and
MDIO_DEVID2 registers. The indirect C45 over C22 feature is not
supported.

Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Signed-off-by: Ciprian Regus &lt;ciprian.regus@analog.com&gt;
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-12-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni &lt;pabeni@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: Introduce Airoha AN8801R Gigabit Ethernet PHY driver</title>
<updated>2026-05-28T01:39:24+00:00</updated>
<author>
<name>AngeloGioacchino Del Regno</name>
<email>angelogioacchino.delregno@collabora.com</email>
</author>
<published>2026-05-26T14:58:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=fdb9bf7f1658709dd1a6f85f07e18393efd569e9'/>
<id>fdb9bf7f1658709dd1a6f85f07e18393efd569e9</id>
<content type='text'>
Introduce a driver for the Airoha AN8801R Series Gigabit Ethernet
PHY; this currently supports setting up PHY LEDs, 10/100M, 1000M
speeds, and Wake on LAN and PHY interrupts.

Signed-off-by: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@collabora.com&gt;
Signed-off-by: Louis-Alexis Eyraud &lt;louisalexis.eyraud@collabora.com&gt;
Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-5-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Introduce a driver for the Airoha AN8801R Series Gigabit Ethernet
PHY; this currently supports setting up PHY LEDs, 10/100M, 1000M
speeds, and Wake on LAN and PHY interrupts.

Signed-off-by: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@collabora.com&gt;
Signed-off-by: Louis-Alexis Eyraud &lt;louisalexis.eyraud@collabora.com&gt;
Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-5-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: Add Airoha phy library for shared code</title>
<updated>2026-05-28T01:39:24+00:00</updated>
<author>
<name>Louis-Alexis Eyraud</name>
<email>louisalexis.eyraud@collabora.com</email>
</author>
<published>2026-05-26T14:58:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=dddfadd75197e018c4ef30ebb2488aefc75e02d0'/>
<id>dddfadd75197e018c4ef30ebb2488aefc75e02d0</id>
<content type='text'>
In preparation of Airoha AN8801R PHY support, split out the interface
functions that will be common between the already present air_en8811h
driver and the new one, and put them into a new library named
air_phy_lib.

Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Signed-off-by: Louis-Alexis Eyraud &lt;louisalexis.eyraud@collabora.com&gt;
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-2-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In preparation of Airoha AN8801R PHY support, split out the interface
functions that will be common between the already present air_en8811h
driver and the new one, and put them into a new library named
air_phy_lib.

Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Signed-off-by: Louis-Alexis Eyraud &lt;louisalexis.eyraud@collabora.com&gt;
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-2-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: remove Kconfig symbol MDIO_BUS</title>
<updated>2026-03-19T01:27:12+00:00</updated>
<author>
<name>Heiner Kallweit</name>
<email>hkallweit1@gmail.com</email>
</author>
<published>2026-03-15T16:50:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=91283bd5b008d5cd2b6a24f246ffb3e706b8c981'/>
<id>91283bd5b008d5cd2b6a24f246ffb3e706b8c981</id>
<content type='text'>
After usage of config symbol MDIO_BUS has been removed from REGMAP_MIO
as last user, the symbol can be removed.

Signed-off-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Link: https://patch.msgid.link/9cdf83e9-470d-45da-8efe-ace0decf0204@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
After usage of config symbol MDIO_BUS has been removed from REGMAP_MIO
as last user, the symbol can be removed.

Signed-off-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Link: https://patch.msgid.link/9cdf83e9-470d-45da-8efe-ace0decf0204@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: make mdio_device.c part of libphy</title>
<updated>2026-03-14T19:23:02+00:00</updated>
<author>
<name>Heiner Kallweit</name>
<email>hkallweit1@gmail.com</email>
</author>
<published>2026-03-09T17:03:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=6df1459605cedd2112ebf660c77f42bb87d5c306'/>
<id>6df1459605cedd2112ebf660c77f42bb87d5c306</id>
<content type='text'>
This patch
- makes mdio_device.c part of libphy
- makes mdio_device_(un)register_reset() static
- moves mdiobus_(un)register_device() from mdio_bus.c to mdio_device.c,
  stops exporting both functions and makes them private to phylib

This further decouples the MDIO consumer functionality from libphy.

Note: This makes MDIO driver registration part of phylib, therefore
      adjust Kconfig dependencies where needed.

Signed-off-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Link: https://patch.msgid.link/c6dbf9b3-3ca0-434b-ad3a-71fe602ab809@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This patch
- makes mdio_device.c part of libphy
- makes mdio_device_(un)register_reset() static
- moves mdiobus_(un)register_device() from mdio_bus.c to mdio_device.c,
  stops exporting both functions and makes them private to phylib

This further decouples the MDIO consumer functionality from libphy.

Note: This makes MDIO driver registration part of phylib, therefore
      adjust Kconfig dependencies where needed.

Signed-off-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Link: https://patch.msgid.link/c6dbf9b3-3ca0-434b-ad3a-71fe602ab809@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: Introduce PHY ports representation</title>
<updated>2026-01-14T02:52:34+00:00</updated>
<author>
<name>Maxime Chevallier</name>
<email>maxime.chevallier@bootlin.com</email>
</author>
<published>2026-01-08T08:00:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=589e934d2735b55fbe68517128668df7af3ac4ae'/>
<id>589e934d2735b55fbe68517128668df7af3ac4ae</id>
<content type='text'>
Ethernet provides a wide variety of layer 1 protocols and standards for
data transmission. The front-facing ports of an interface have their own
complexity and configurability.

Introduce a representation of these front-facing ports. The current code
is minimalistic and only support ports controlled by PHY devices, but
the plan is to extend that to SFP as well as raw Ethernet MACs that
don't use PHY devices.

This minimal port representation allows describing the media and number
of pairs of a BaseT port. From that information, we can derive the
linkmodes usable on the port, which can be used to limit the
capabilities of an interface.

For now, the port pairs and medium is derived from devicetree, defined
by the PHY driver, or populated with default values (as we assume that
all PHYs expose at least one port).

The typical example is 100M ethernet. 100BaseTX works using only 2
pairs on a Cat 5 cables. However, in the situation where a 10/100/1000
capable PHY is wired to its RJ45 port through 2 pairs only, we have no
way of detecting that. The "max-speed" DT property can be used, but a
more accurate representation can be used :

mdi {
	connector-0 {
		media = "BaseT";
		pairs = &lt;2&gt;;
	};
};

From that information, we can derive the max speed reachable on the
port.

Another benefit of having that is to avoid vendor-specific DT properties
(micrel,fiber-mode or ti,fiber-mode).

This basic representation is meant to be expanded, by the introduction
of port ops, userspace listing of ports, and support for multi-port
devices.

Reviewed-by: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
Signed-off-by: Maxime Chevallier &lt;maxime.chevallier@bootlin.com&gt;
Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Link: https://patch.msgid.link/20260108080041.553250-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Ethernet provides a wide variety of layer 1 protocols and standards for
data transmission. The front-facing ports of an interface have their own
complexity and configurability.

Introduce a representation of these front-facing ports. The current code
is minimalistic and only support ports controlled by PHY devices, but
the plan is to extend that to SFP as well as raw Ethernet MACs that
don't use PHY devices.

This minimal port representation allows describing the media and number
of pairs of a BaseT port. From that information, we can derive the
linkmodes usable on the port, which can be used to limit the
capabilities of an interface.

For now, the port pairs and medium is derived from devicetree, defined
by the PHY driver, or populated with default values (as we assume that
all PHYs expose at least one port).

The typical example is 100M ethernet. 100BaseTX works using only 2
pairs on a Cat 5 cables. However, in the situation where a 10/100/1000
capable PHY is wired to its RJ45 port through 2 pairs only, we have no
way of detecting that. The "max-speed" DT property can be used, but a
more accurate representation can be used :

mdi {
	connector-0 {
		media = "BaseT";
		pairs = &lt;2&gt;;
	};
};

From that information, we can derive the max speed reachable on the
port.

Another benefit of having that is to avoid vendor-specific DT properties
(micrel,fiber-mode or ti,fiber-mode).

This basic representation is meant to be expanded, by the introduction
of port ops, userspace listing of ports, and support for multi-port
devices.

Reviewed-by: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
Signed-off-by: Maxime Chevallier &lt;maxime.chevallier@bootlin.com&gt;
Reviewed-by: Andrew Lunn &lt;andrew@lunn.ch&gt;
Link: https://patch.msgid.link/20260108080041.553250-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: remove mdio_board_info support from phylib</title>
<updated>2025-09-17T22:24:01+00:00</updated>
<author>
<name>Heiner Kallweit</name>
<email>hkallweit1@gmail.com</email>
</author>
<published>2025-09-13T21:08:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b67a8631a4a8f26a18fac236aaf61aa2412c7a0d'/>
<id>b67a8631a4a8f26a18fac236aaf61aa2412c7a0d</id>
<content type='text'>
After having removed mdio_board_info usage from dsa_loop, there's no
user left. So let's drop support for it from phylib.

Signed-off-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Link: https://patch.msgid.link/01542a2e-05f5-4f13-acef-72632b33b5be@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
After having removed mdio_board_info usage from dsa_loop, there's no
user left. So let's drop support for it from phylib.

Signed-off-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Link: https://patch.msgid.link/01542a2e-05f5-4f13-acef-72632b33b5be@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
