linux-toradex.git/drivers/net/phy/Makefile, branch v4.4.93

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-10-24T13:54:12+00:00

Conflicts:
	net/ipv6/xfrm6_output.c
	net/openvswitch/flow_netlink.c
	net/openvswitch/vport-gre.c
	net/openvswitch/vport-vxlan.c
	net/openvswitch/vport.c
	net/openvswitch/vport.h

The openvswitch conflicts were overlapping changes.  One was
the egress tunnel info fix in 'net' and the other was the
vport ->send() op simplification in 'net-next'.

The xfrm6_output.c conflicts was also a simplification
overlapping a bug fix.

Signed-off-by: David S. Miller

net: phy: dp83848: Add TI DP83848 Ethernet PHY

2015-10-22T13:37:19+00:00

Add support for the TI DP83848 Ethernet PHY device.

The DP83848 is a highly reliable, feature rich, IEEE 802.3 compliant
single port 10/100 Mb/s Ethernet Physical Layer Transceiver supporting
the MII and RMII interfaces.

Signed-off-by: Andrew F. Davis 
Signed-off-by: Dan Murphy 
Reviewed-by: Florian Fainelli 
Acked-by: Dan Murphy 
Signed-off-by: David S. Miller

net: phy: Broadcom Cygnus internal Etherent PHY driver

2015-10-08T11:45:52+00:00

Add support for the Broadcom Cygnus SoCs internal PHY's.
The PHYs are 1000M/100M/10M capable with support for 'EEE'
and 'APD' (Auto Power Down).

This driver supports the following Broadcom Cygnus SoCs:
 - BCM583XX (BCM58300, BCM58302, BCM58303, BCM58305)
 - BCM113XX (BCM11300, BCM11320, BCM11350, BCM11360)

The PHY's on these SoC's require some workarounds for
stable operation, both during configuration time and
during suspend/resume. This driver handles the
application of the workarounds.

Signed-off-by: Arun Parameswaran 
Signed-off-by: David S. Miller

net: phy: Add Broadcom phy library for common interfaces

2015-10-08T11:45:46+00:00

This patch adds the Broadcom phy library to consolidate common
interfaces shared by Broadcom phy's.

Moved the common interfaces to the 'bcm-phy-lib.c' and updated
the Broadcom PHY drivers to use the new APIs.

Signed-off-by: Arun Parameswaran 
Signed-off-by: David S. Miller

net: phy: Broadcom iProc MDIO bus driver

2015-10-08T11:44:46+00:00

This patch adds support for the Broadcom iProc MDIO bus interface.
The MDIO interface can be found in the Broadcom iProc family Soc's.

The MDIO bus is accessed using a combination of command and data
registers. This MDIO driver provides access to the Etherent GPHY's
connected to the MDIO bus.

Signed-off-by: Arun Parameswaran 
Signed-off-by: David S. Miller

add microchip LAN88xx phy driver

2015-09-10T00:19:14+00:00

Add Microchip LAN88XX phy driver for phylib.

Signed-off-by: Woojung Huh 
Signed-off-by: David S. Miller

net: phy: add driver for aquantia phy

2015-07-31T22:28:19+00:00

This patch added driver to support Aquantia PHYs AQ1202, AQ2104, AQR105,
AQR405, which accessed through clause 45.

Signed-off-by: Shaohui Xie 
Signed-off-by: David S. Miller

phylib: add driver for Teranetics TN2020

2015-07-21T06:59:41+00:00

Teranetics TN2020 is compliant with IEEE 802.3an 10 Gigabit.

Signed-off-by: Shaohui Xie 
Signed-off-by: David S. Miller

net: phy: dp83867: Add TI dp83867 phy

2015-06-04T02:41:04+00:00

Add support for the TI dp83867 Gigabit ethernet phy
device.

The DP83867 is a robust, low power, fully featured
Physical Layer transceiver with integrated PMD
sublayers to support 10BASE-T, 100BASE-TX and
1000BASE-T Ethernet protocols.

Signed-off-by: Dan Murphy 
Signed-off-by: David S. Miller

amd-xgbe: Move the PHY support into amd-xgbe

2015-05-15T19:21:43+00:00

The AMD XGBE device is intended to work with a specific integrated PHY
and that PHY is not meant to be a standalone PHY for use by other
devices. As such this patch removes the phylib driver and implements
the PHY support in the amd-xgbe driver (the majority of the logic from
the phylib driver is moved into the amd-xgbe driver).

Update the driver version to 1.0.1.

Signed-off-by: Tom Lendacky 
Signed-off-by: David S. Miller