linux-toradex.git/drivers/net/phy/dp83848.c, branch v6.3-rc5 Linux kernel for Apalis and Colibri modules net: phy: ti: remove the use of .ack_interrupt() 2020-11-25T19:18:38+00:00 Ioana Ciornei ioana.ciornei@nxp.com 2020-11-23T15:38:14+00:00 aa2d603ac8c0a3070e78edd4c07606ae2587754f In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: ti: implement generic .handle_interrupt() callback 2020-11-25T19:18:38+00:00 Ioana Ciornei ioana.ciornei@nxp.com 2020-11-23T15:38:13+00:00 1d1ae3c6ca3ff49843d73852bb2a8153ce16f432 In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.

Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: phy: remove calls to genphy_config_init 2019-08-17T19:34:50+00:00 Heiner Kallweit hkallweit1@gmail.com 2019-08-17T10:29:25+00:00 c227ce4423855bddb41a05ad25a93f13b96c89bd Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed. All that genphy_config_init does is removing features that are set as supported but can't be auto-detected. Basically it duplicates the code in genphy_read_abilities. Therefore remove such calls from all PHY drivers. v2: - remove call also from new adin PHY driver v3: - pass NULL as config_init function pointer for dp83848 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Supported PHY features are either auto-detected or explicitly set.
In both cases calling genphy_config_init isn't needed. All that
genphy_config_init does is removing features that are set as
supported but can't be auto-detected. Basically it duplicates the
code in genphy_read_abilities. Therefore remove such calls from
all PHY drivers.

v2:
- remove call also from new adin PHY driver
v3:
- pass NULL as config_init function pointer for dp83848

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: switch drivers to use dynamic feature detection 2019-04-16T00:19:54+00:00 Heiner Kallweit hkallweit1@gmail.com 2019-04-12T18:47:03+00:00 dcdecdcfe1fc39ded8590aed2fe84d62f14b2392 Recently genphy_read_abilities() has been added that dynamically detects clause 22 PHY abilities. I *think* this detection should work with all supported PHY's, at least for the ones with basic features sets, i.e. PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these features explicitly and rely on phylib feature detection. I don't have access to most of these PHY's, therefore I'd appreciate regression testing. v2: - make the feature constant a comment so that readers know which features are supported by the respective PHY Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
Recently genphy_read_abilities() has been added that dynamically detects
clause 22 PHY abilities. I *think* this detection should work with all
supported PHY's, at least for the ones with basic features sets, i.e.
PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
features explicitly and rely on phylib feature detection.

I don't have access to most of these PHY's, therefore I'd appreciate
regression testing.

v2:
- make the feature constant a comment so that readers know which
  features are supported by the respective PHY

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: Fixup GPLv2 SPDX tags based on license text 2019-01-23T04:58:40+00:00 Andrew Lunn andrew@lunn.ch 2019-01-21T18:10:19+00:00 5f85757572e17f11b956e77405289babf1f234e3 A few PHY drivers have the GPLv2 license text. They then either have a MODULE_LICENSE() of GPLv2+, or an SPDX tag of GPLv2+. Since the license text is much easier to understand than either the SPDX tag or the MODULE_LICENSE, use it as the definitive source of the licence, and fixup with others when there are contradictions. Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Scott Wood <scottwood@freescale.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Andrew F. Davis <afd@ti.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
A few PHY drivers have the GPLv2 license text. They then either have
a MODULE_LICENSE() of GPLv2+, or an SPDX tag of GPLv2+.

Since the license text is much easier to understand than either the
SPDX tag or the MODULE_LICENSE, use it as the definitive source of the
licence, and fixup with others when there are contradictions.

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Laurent Pinchart <laurentp@cse-semaphore.com>
Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: remove flag PHY_HAS_INTERRUPT from driver configs 2018-11-11T17:36:56+00:00 Heiner Kallweit hkallweit1@gmail.com 2018-11-09T17:17:22+00:00 a4307c0ec66131e722a8fa0f1da09646c46ee924 Now that flag PHY_HAS_INTERRUPT has been replaced with a check for callbacks config_intr and ack_interrupt, we can remove setting this flag from all driver configs. Last but not least remove flag PHY_HAS_INTERRUPT completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
Now that flag PHY_HAS_INTERRUPT has been replaced with a check for
callbacks config_intr and ack_interrupt, we can remove setting this
flag from all driver configs.
Last but not least remove flag PHY_HAS_INTERRUPT completely.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620 2018-06-10T19:38:03+00:00 Alvaro Gamez Machado alvaro.gamez@hazent.com 2018-06-08T10:23:39+00:00 b718e8c8f4f5920aaddc2e52d5e32f494c91129c DP83620 register set is compatible with the DP83848, but it also supports 100base-FX. When the hardware is configured such as that fiber mode is enabled, autonegotiation is not possible. The chip, however, doesn't expose this information via BMSR_ANEGCAPABLE. Instead, this bit is always set high, even if the particular hardware configuration makes it so that auto negotiation is not possible [1]. Under these circumstances, the phy subsystem keeps trying for autonegotiation to happen, without success. Hereby, we inspect BMCR_ANENABLE bit after genphy_config_init, which on reset is set to 0 when auto negotiation is disabled, and so we use this value instead of BMSR_ANEGCAPABLE. [1] https://e2e.ti.com/support/interface/ethernet/f/903/p/697165/2571170 Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
DP83620 register set is compatible with the DP83848, but it also supports
100base-FX. When the hardware is configured such as that fiber mode is
enabled, autonegotiation is not possible.

The chip, however, doesn't expose this information via BMSR_ANEGCAPABLE.
Instead, this bit is always set high, even if the particular hardware
configuration makes it so that auto negotiation is not possible [1]. Under
these circumstances, the phy subsystem keeps trying for autonegotiation to
happen, without success.

Hereby, we inspect BMCR_ANENABLE bit after genphy_config_init, which on
reset is set to 0 when auto negotiation is disabled, and so we use this
value instead of BMSR_ANEGCAPABLE.

[1] https://e2e.ti.com/support/interface/ethernet/f/903/p/697165/2571170

Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01T20:42:21+00:00 Heiner Kallweit hkallweit1@gmail.com 2017-11-30T22:47:52+00:00 80274abafc606f611c4ca8d5cebdcec8933835a9 Remove generic settings for callbacks config_aneg and read_status from drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Remove generic settings for callbacks config_aneg and read_status
from drivers.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: DP83822 initial driver submission 2017-10-11T21:14:32+00:00 Dan Murphy dmurphy@ti.com 2017-10-10T17:42:55+00:00 87461f7a58ab694e638ac52afa543b427751a9d0 Add support for the TI DP83822 10/100Mbit ethernet phy. The DP83822 provides flexibility to connect to a MAC through a standard MII, RMII or RGMII interface. In addition the DP83822 needs to be removed from the DP83848 driver as the WoL support is added here for this device. Datasheet: http://www.ti.com/product/DP83822I/datasheet Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add support for the TI  DP83822 10/100Mbit ethernet phy.

The DP83822 provides flexibility to connect to a MAC through a
standard MII, RMII or RGMII interface.

In addition the DP83822 needs to be removed from the DP83848 driver
as the WoL support is added here for this device.

Datasheet:
http://www.ti.com/product/DP83822I/datasheet

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: dp83848: Fix Typo 2017-03-24T14:33:32+00:00 Andrew F. Davis afd@ti.com 2017-01-05T20:44:50+00:00 3d17cc391f0951fe03f14bd3be751b4724b05d30 Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>