linux-toradex.git/drivers/net/phy/et1011c.c, branch v6.9-rc4

net: phy: remove unnecessary line continuation

2021-06-16T19:34:07+00:00

Avoid unnecessary line continuations, and put '|' at the end of line.

Signed-off-by: Wenpeng Liang 
Signed-off-by: Weihang Li 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: change format of some declarations

2021-06-16T19:34:07+00:00

Add a blank line after declarations, change the order of them and put the
assignments and declarations together.

Cc: Richard Cochran 
Signed-off-by: Wenpeng Liang 
Signed-off-by: Weihang Li 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: switch drivers to use dynamic feature detection

2019-04-16T00:19:54+00:00

Recently genphy_read_abilities() has been added that dynamically detects
clause 22 PHY abilities. I *think* this detection should work with all
supported PHY's, at least for the ones with basic features sets, i.e.
PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
features explicitly and rely on phylib feature detection.

I don't have access to most of these PHY's, therefore I'd appreciate
regression testing.

v2:
- make the feature constant a comment so that readers know which
  features are supported by the respective PHY

Signed-off-by: Heiner Kallweit 
Tested-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: Convert some PHY and MDIO driver files to SPDX headers

2019-01-23T04:53:08+00:00

Where the license text and the MODULE_LICENSE() value agree, convert
to using an SPDX header, removing the license text.

Signed-off-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: et011c: Remove incorrect PHY_POLL flags

2018-09-16T22:31:01+00:00

PHY_POLL is defined as -1 which means that we would be setting all flags of the
PHY driver, this is also not a valid flag to tell PHYLIB about, just remove it.

Signed-off-by: Florian Fainelli 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: et1011c: Remove incorrect missing 1000 Half

2018-09-13T03:24:20+00:00

The driver indicates it can do 10/100 full and half duplex, plus 1G
Full. The datasheet indicates 1G half is also supported. So make use
of the standard PHY_GBIT_FEATURES.

It could be, this was added because there is a MAC which does not
support 1G half. Bit this is the wrong place to enforce this.

Signed-off-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

phy: Centralize setting driver module owner

2016-01-07T19:31:27+00:00

Rather than have each driver set the driver owner field, do it once in
the core code. This will also help with later changes, when the device
structure will move.

Signed-off-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: replace phy_driver_register calls

2014-11-12T18:52:53+00:00

Replace module init/exit which only calls phy_driver_register with
module_phy_driver macro.

Compile tested only.

Signed-off-by: Johan Hovold 
Signed-off-by: David S. Miller

net/phy: fix many "defined but unused" warnings

2010-10-05T07:34:29+00:00

MODULE_DEVICE_TABLE only expands to something if it's compiled
for a module.  So when building-in support for the phys, the
mdio_device_id tables are unused.  Marking them with __maybe_unused
fixes the following warnings:

	drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used
	drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used
	drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used
	drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used
	drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used
	drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used
	drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used
	drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used
	drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used
	drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used
	drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used
	drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used
	drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used
	drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used
	drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used

Signed-off-by: Uwe Kleine-König 
Signed-off-by: David S. Miller

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

2010-04-11T21:53:53+00:00

Conflicts:
	drivers/net/stmmac/stmmac_main.c
	drivers/net/wireless/wl12xx/wl1271_cmd.c
	drivers/net/wireless/wl12xx/wl1271_main.c
	drivers/net/wireless/wl12xx/wl1271_spi.c
	net/core/ethtool.c
	net/mac80211/scan.c