linux-toradex.git/drivers/net/phy/micrel.c, branch v4.20 Linux kernel for Apalis and Colibri modules net: phy: micrel: add Microchip KSZ9131 initial driver 2018-10-20T00:02:23+00:00 Yuiko Oshino yuiko.oshino@microchip.com 2018-10-18T19:06:01+00:00 bff5b4b3737219195ca0caef4ff7884303cb5dc1 Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY

Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-05-21T20:01:54+00:00 David S. Miller davem@davemloft.net 2018-05-21T20:01:54+00:00 6f6e434aa267a6030477876d89444fe3a6b7a48d S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net> 
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.

TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.

The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.

Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.

Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: micrel: add 125MHz reference clock workaround 2018-05-16T16:20:03+00:00 Markus Niebel Markus.Niebel@tqs.de 2018-05-15T08:18:56+00:00 e1b505a60366399d735312ca38b0a6753a684123 The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be used as reference clock for the MAC unit. The clock signal must meet the RGMII requirements to ensure the correct data transmission between the MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle requirement if the phy is configured as slave. For a complete describtion look at the errata sheets: DS80000691D or DS80000692D. The errata sheet recommends to force the phy into master mode whenever there is a 1000Base-T link-up as work around. Only set the "micrel,force-master" property if you use the phy reference clock provided by CLK125_NDO pin as MAC reference clock in your application. Attenation, this workaround is only usable if the link partner can be configured to slave mode for 1000Base-T. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> [m.felsch@pengutronix.de: fix dt-binding documentation] [m.felsch@pengutronix.de: use already existing result var for read/write] [m.felsch@pengutronix.de: add error handling] [m.felsch@pengutronix.de: add more comments] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 
The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be
used as reference clock for the MAC unit. The clock signal must meet the
RGMII requirements to ensure the correct data transmission between the
MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle
requirement if the phy is configured as slave. For a complete
describtion look at the errata sheets: DS80000691D or DS80000692D.

The errata sheet recommends to force the phy into master mode whenever
there is a 1000Base-T link-up as work around. Only set the
"micrel,force-master" property if you use the phy reference clock provided
by CLK125_NDO pin as MAC reference clock in your application.

Attenation, this workaround is only usable if the link partner can
be configured to slave mode for 1000Base-T.

Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
[m.felsch@pengutronix.de: fix dt-binding documentation]
[m.felsch@pengutronix.de: use already existing result var for read/write]
[m.felsch@pengutronix.de: add error handling]
[m.felsch@pengutronix.de: add more comments]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers: net: replace UINT64_MAX with U64_MAX 2018-04-28T00:18:55+00:00 Jisheng Zhang Jisheng.Zhang@synaptics.com 2018-04-27T08:18:58+00:00 6c3442f5f85827e40e314a74a24b1428e78748c8 U64_MAX is well defined now while the UINT64_MAX is not, so we fall back to drivers' own definition as below: #ifndef UINT64_MAX #define UINT64_MAX (u64)(~((u64)0)) #endif I believe this is in one phy driver then copied and pasted to other phy drivers. Replace the UINT64_MAX with U64_MAX to clean up the source code. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
U64_MAX is well defined now while the UINT64_MAX is not, so we fall
back to drivers' own definition as below:

	#ifndef UINT64_MAX
	#define UINT64_MAX             (u64)(~((u64)0))
	#endif

I believe this is in one phy driver then copied and pasted to other phy
drivers.

Replace the UINT64_MAX with U64_MAX to clean up the source code.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: micrel: Use the general dummy stubs for MMD register access 2018-03-22T15:41:08+00:00 Kevin Hao haokexin@gmail.com 2018-03-20T01:44:54+00:00 c846a2b7bd0e6900a726afb7c0a066f3a93617cf The new general dummy stubs for MMD register access were introduced. Use that for the codes reuse. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
The new general dummy stubs for MMD register access were introduced.
Use that for the codes reuse.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: micrel: Use strlcpy() for ethtool::get_strings 2018-03-06T16:12:39+00:00 Florian Fainelli f.fainelli@gmail.com 2018-03-02T23:08:38+00:00 55f53567afe5f0cd2fd9e006b174c08c31c466f8 Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: 2b2427d06426 ("phy: micrel: Add ethtool statistics counters") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Our statistics strings are allocated at initialization without being
bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using
memcpy() which would create out of bounds accesses, this was flagged by
KASAN. Replace this with strlcpy() to make sure we are bound the source
buffer size and we also always NUL-terminate strings.

Fixes: 2b2427d06426 ("phy: micrel: Add ethtool statistics counters")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-12-29T20:42:26+00:00 David S. Miller davem@davemloft.net 2017-12-29T20:14:27+00:00 6bb8824732f69de0f233ae6b1a8158e149627b38 net/ipv6/ip6_gre.c is a case of parallel adds. include/trace/events/tcp.h is a little bit more tricky. The removal of in-trace-macro ifdefs in 'net' paralleled with moving show_tcp_state_name and friends over to include/trace/events/sock.h in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net> 
net/ipv6/ip6_gre.c is a case of parallel adds.

include/trace/events/tcp.h is a little bit more tricky.  The removal
of in-trace-macro ifdefs in 'net' paralleled with moving
show_tcp_state_name and friends over to include/trace/events/sock.h
in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround 2017-12-26T17:26:43+00:00 Grygorii Strashko grygorii.strashko@ti.com 2017-12-21T00:45:10+00:00 c1a8d0a3accf64a014d605e6806ce05d1c17adf1 Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Under some circumstances driver will perform PHY reset in
ksz9031_read_status() to fix autoneg failure case (idle error count =
0xFF). When this happens ksz9031 will not detect link status change any
more when connecting to Netgear 1G switch (link can be recovered sometimes by
restarting netdevice "ifconfig down up"). Reproduced with TI am572x board
equipped with ksz9031 PHY while connecting to Netgear 1G switch.

Fix the issue by reconfiguring autonegotiation after PHY reset in
ksz9031_read_status().

Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-12-05T15:44:19+00:00 David S. Miller davem@davemloft.net 2017-12-05T15:44:19+00:00 7cda4cee1366fae236678a5a6b124bab86b14973 Small overlapping change conflict ('net' changed a line, 'net-next' added a line right afterwards) in flexcan.c Signed-off-by: David S. Miller <davem@davemloft.net> 
Small overlapping change conflict ('net' changed a line,
'net-next' added a line right afterwards) in flexcan.c

Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01T20:42:21+00:00 Heiner Kallweit hkallweit1@gmail.com 2017-11-30T22:47:52+00:00 80274abafc606f611c4ca8d5cebdcec8933835a9 Remove generic settings for callbacks config_aneg and read_status from drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Remove generic settings for callbacks config_aneg and read_status
from drivers.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>