linux-toradex.git/drivers/net/phy/smsc.c, branch v2.6.38

net/phy: fix many "defined but unused" warnings

2010-10-05T07:34:29+00:00

MODULE_DEVICE_TABLE only expands to something if it's compiled
for a module.  So when building-in support for the phys, the
mdio_device_id tables are unused.  Marking them with __maybe_unused
fixes the following warnings:

	drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used
	drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used
	drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used
	drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used
	drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used
	drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used
	drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used
	drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used
	drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used
	drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used
	drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used
	drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used
	drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used
	drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used
	drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used

Signed-off-by: Uwe Kleine-König 
Signed-off-by: David S. Miller

phylib: Add module table to all existing phy drivers

2010-04-02T21:30:40+00:00

Signed-off-by: David Woodhouse 
Signed-off-by: David S. Miller

phy: SMSC device Energy Detect power-down mode

2010-01-07T04:35:14+00:00

SMSC Ethernet Transceivers (LAN88710, LAN8710, LAN8720, LAN8187,
LAN8700, LAN83C185) provide a mechanism to conserve power when
the device is not connected to an active link partner
(Energy Detect Mode).
So this patch enables the Energy Detect power-down mode
for these Transceivers.

Signed-off-by: Giuseppe Cavallaro 
Signed-off-by: David S. Miller

phy: add new LAN8710 and LAN8720 device ids to smsc phy driver

2009-03-23T22:17:31+00:00

LAN8710 and LAN8720 are two new 10/100 ethernet PHY models. The two
share the same phy id, this patch adds it to the smsc phy driver.

Signed-off-by: Steve Glendinning 
Signed-off-by: David S. Miller

phy: Add suspend/resume support to SMSC PHYs

2009-01-22T22:07:43+00:00

All supported SMSC PHYs implement the standard "power down" bit 11 of
BMCR, so this patch adds support using the generic genphy_{suspend,resume}
functions.

Signed-off-by: Steve Glendinning 
Signed-off-by: David S. Miller

SMSC LAN911x and LAN921x vendor driver

2008-11-06T05:58:40+00:00

Attached is a driver for SMSC's LAN911x and LAN921x families of embedded
ethernet controllers.

There is an existing smc911x driver in the tree; this is intended to
replace it.  Dustin McIntire (the author of the smc911x driver) has
expressed his support for switching to this driver.

This driver contains workarounds for all known hardware issues, and has
been tested on all flavours of the chip on multiple architectures.

This driver now uses phylib, so this patch also adds support for the
device's internal phy

Signed-off-by: Steve Glendinning 
Signed-off-by: Bahadir Balban 
Signed-off-by: Dustin Mcintire 
Signed-off-by: Bill Gatliff 
Signed-off-by: Jeff Garzik

Add support for SMSC LAN8187 and LAN8700 PHYs

2008-04-29T05:55:59+00:00

Add support for two additional SMSC PHY models with identical interrupt
source and mask registers to the LAN83C185

Signed-off-by: Steve Glendinning 
Signed-off-by: Jeff Garzik

Rename SMSC phy functions to be more generic

2008-04-29T05:55:57+00:00

Several models of SMSC PHY have the same interrupt status and mask
registers as the LAN83C185, so these functions can service multiple
different PHY drivers.

Signed-off-by: Steve Glendinning 
Signed-off-by: Jeff Garzik

[PATCH] remove unnecessary config.h includes from drivers/net/

2006-08-14T18:00:43+00:00

config.h is automatically included by kbuild these days.

Signed-off-by: Dave Jones 
Signed-off-by: Jeff Garzik

[PATCH] phy: new SMSC LAN83C185 PHY driver

2006-05-24T06:51:33+00:00

new SMSC LAN83C185 10BaseT/100BaseTX PHY driver for the PHY subsystem

Signed-off-by: Herbert Valerio Riedel 
Signed-off-by: Jeff Garzik