linux-toradex.git/drivers/net/phy, branch v2.6.39-rc2 Linux kernel for Apalis and Colibri modules phylib: phy_attach_direct: phy_init_hw can fail, add cleanup 2011-03-30T09:31:36+00:00 Marc Kleine-Budde mkl@pengutronix.de 2011-03-28T14:54:08+00:00 d005a09edf8b12dd1bec651b2cf94caa0e7bb1be The function phy_attach_direct attaches the phy and calls phy_init_hw. phy_init_hw can fail, but the phy is still marked as attached. Successive calls to phy_attach_direct will fail because the phy is busy. [ 1.020000] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1) [ 1.030000] eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1) [ 2.050000] Sending DHCP requests . [ 3.020000] PHY: 1:00 - Link is Up - 100/Full [ 5.110000] ..... timed out! [ 87.660000] IP-Config: Reopening network devices... [ 88.190000] FEC: MDIO read timeout [ 88.190000] eth0: could not attach to PHY [ 88.190000] IP-Config: Failed to open eth0 [ 88.210000] FEC: MDIO read timeout [ 88.210000] eth1: could not attach to PHY [ 88.210000] IP-Config: Failed to open eth1 [ 88.220000] IP-Config: No network devices available. [ 88.220000] Freeing init memory: 6968K [...] starting network interfaces... ip: RTNETLINK answers: File exists [ 94.000000] net eth0: PHY already attached [ 94.010000] eth0: could not attach to PHY ip: SIOCSIFFLAGS: Device or resource busy This patch adds phy_detach to clean up if phy_init_hw fails. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
The function phy_attach_direct attaches the phy and calls phy_init_hw.
phy_init_hw can fail, but the phy is still marked as attached. Successive
calls to phy_attach_direct will fail because the phy is busy.

[    1.020000] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1)
[    1.030000] eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1)
[    2.050000] Sending DHCP requests .
[    3.020000] PHY: 1:00 - Link is Up - 100/Full
[    5.110000] ..... timed out!
[   87.660000] IP-Config: Reopening network devices...
[   88.190000] FEC: MDIO read timeout
[   88.190000] eth0: could not attach to PHY
[   88.190000] IP-Config: Failed to open eth0
[   88.210000] FEC: MDIO read timeout
[   88.210000] eth1: could not attach to PHY
[   88.210000] IP-Config: Failed to open eth1
[   88.220000] IP-Config: No network devices available.
[   88.220000] Freeing init memory: 6968K

[...]

starting network interfaces...
ip: RTNETLINK answers: File exists
[   94.000000] net eth0: PHY already attached
[   94.010000] eth0: could not attach to PHY
ip: SIOCSIFFLAGS: Device or resource busy

This patch adds phy_detach to clean up if phy_init_hw fails.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6 2011-03-17T00:28:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-03-17T00:28:10+00:00 4c5811bf463b0ef82fabbd1708f8bb2d753aeb18 * 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ... 
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
  tty: serial: altera_jtaguart: Add device tree support
  tty: serial: altera_uart: Add devicetree support
  dt: eliminate of_platform_driver shim code
  dt: Eliminate of_platform_{,un}register_driver
  dt/serial: Eliminate users of of_platform_{,un}register_driver
  dt/usb: Eliminate users of of_platform_{,un}register_driver
  dt/video: Eliminate users of of_platform_{,un}register_driver
  dt/net: Eliminate users of of_platform_{,un}register_driver
  dt/sound: Eliminate users of of_platform_{,un}register_driver
  dt/spi: Eliminate users of of_platform_{,un}register_driver
  dt: uartlite: merge platform and of_platform driver bindings
  dt: xilinx_hwicap: merge platform and of_platform driver bindings
  ipmi: convert OF driver to platform driver
  leds/leds-gpio: merge platform_driver with of_platform_driver
  dt/sparc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: move of_bus_type infrastructure to ibmebus
  drivercore/dt: add a match table pointer to struct device
  dt: Typo fix.
  altera_ps2: Add devicetree support
  ...
phylib: SIOCGMIIREG/SIOCSMIIREG: allow access to all mdio addresses 2011-03-14T22:02:14+00:00 Peter Korsgaard jacmet@sunsite.dk 2011-03-10T06:52:13+00:00 af1dc13e607c1d1a909e21ee87aafbe7b9d4ae81 phylib would silently ignore the phy_id argument to these ioctls and perform the read/write with the active phydev address, whereas most non-phylib drivers seem to allow access to all mdio addresses (E.G. pcnet_cs). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net> 
phylib would silently ignore the phy_id argument to these ioctls and
perform the read/write with the active phydev address, whereas most
non-phylib drivers seem to allow access to all mdio addresses
(E.G. pcnet_cs).

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
dt/net: Eliminate users of of_platform_{,un}register_driver 2011-02-28T20:22:44+00:00 Grant Likely grant.likely@secretlab.ca 2011-02-23T04:05:51+00:00 74888760d40b3ac9054f9c5fa07b566c0676ba2d Get rid of users of of_platform_driver in drivers/net. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 
Get rid of users of of_platform_driver in drivers/net.  The
of_platform_{,un}register_driver functions are going away, so the
users need to be converted to using the platform_bus_type directly.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
phy/micrel: add ability to support 50MHz RMII clock on KZS8051RNL 2011-02-15T01:38:30+00:00 Baruch Siach baruch@tkos.co.il 2011-02-14T02:05:33+00:00 d606ef3fe0c57504b8e534c58498f73a6abc049a Platform code can now set the MICREL_PHY_50MHZ_CLK bit of dev_flags in a fixup routine (registered with phy_register_fixup_for_uid()), to make the KZS8051RNL PHY work with 50MHz RMII reference clock. Cc: David J. Choi <david.choi@micrel.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> 
Platform code can now set the MICREL_PHY_50MHZ_CLK bit of dev_flags in a fixup
routine (registered with phy_register_fixup_for_uid()), to make the KZS8051RNL
PHY work with 50MHz RMII reference clock.

Cc: David J. Choi <david.choi@micrel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
phy: Remove unneeded depends on PHYLIB 2011-02-12T06:01:08+00:00 hartleys hartleys@visionengravers.com 2011-02-11T12:14:06+00:00 d5e219c3a2389f31b18e4ca55c33a12adaadf565 Remove unneeded depends on PHYLIB. The config selection is already in an if PHYLIB / endif block. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> 
Remove unneeded depends on PHYLIB.  The config selection is already in
an if PHYLIB / endif block.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-12-17T20:27:22+00:00 David S. Miller davem@davemloft.net 2010-12-17T20:27:22+00:00 b4aa9e05a61b845541fa6f5b1d246976922601f0 Conflicts: drivers/net/bnx2x/bnx2x.h drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/vhost/vhost.c 
Conflicts:
	drivers/net/bnx2x/bnx2x.h
	drivers/net/wireless/iwlwifi/iwl-1000.c
	drivers/net/wireless/iwlwifi/iwl-6000.c
	drivers/net/wireless/iwlwifi/iwl-core.h
	drivers/vhost/vhost.c
phy: add the IC+ IP1001 driver 2010-12-10T23:48:43+00:00 Giuseppe CAVALLARO peppe.cavallaro@st.com 2010-12-08T23:05:13+00:00 377ecca9ba6d98f31517e2322075e94d1be94561 This patch adds the IC+ IP1001 (Gigabit Ethernet Transceiver) driver. I've had to add an additional delay (2ns) to adjust RX clock phase at GMII/ RGMII interface (according to the PHY data-sheet). This helps to have the RGMII working on some ST platforms. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch adds the IC+ IP1001 (Gigabit Ethernet Transceiver) driver.
I've had to add an additional delay (2ns) to adjust RX clock phase at
GMII/ RGMII interface (according to the PHY data-sheet). This helps to
have the RGMII working on some ST platforms.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-12-08T21:47:38+00:00 David S. Miller davem@davemloft.net 2010-12-08T21:15:38+00:00 fe6c791570efe717946ea7b7dd50aec96b70d551 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c net/llc/af_llc.c 
Conflicts:
	drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
	net/llc/af_llc.c
net: add some KERN_CONT markers to continuation lines 2010-11-28T18:47:17+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2010-11-23T22:57:47+00:00 a40c9f88b5e3da500ddab9440e5ddac170c12281 Cc: netdev@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
Cc: netdev@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>