linux-toradex.git/drivers/net/phy, branch v4.4-rc6

net: phy: mdio-mux: Check return value of mdiobus_alloc()

2015-12-14T19:27:40+00:00

mdiobus_alloc() might return NULL, but its return value is not
checked in mdio_mux_init(). This could potentially lead to a NULL
pointer dereference. Fix it by checking the return value

Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.")
Signed-off-by: Tobias Klauser 
Signed-off-by: David S. Miller

phy: micrel: Fix finding PHY properties in MAC node.

2015-12-12T01:31:15+00:00

commit 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus,
not the bus' parent.")  changed the parenting of PHY devices, making
them a child of the MDIO bus, instead of the MAC device. This broken
the Micrel PHY driver which has a deprecated feature of allowing PHY
properties to be placed into the MAC node.

In order to find the MAC node, we need to walk up the tree of devices
until we find one with an OF node attached.

Reported-by: Dinh Nguyen 
Suggested-by: David Daney 
Acked-by: David Daney 
Fixes: 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.")
Signed-off-by: Andrew Lunn 
Tested-by: Dinh Nguyen 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: reset only targeted phy

2015-12-03T20:26:13+00:00

It is possible to address another chip on same MDIO bus. The case is
correctly handled for media advertising. It is taken into account
only if mii_data->phy_id == phydev->addr. However, this condition
was missing for reset case.

Signed-off-by: Jérôme Pouiller 
Signed-off-by: David S. Miller

broadcom: fix PHY_ID_BCM5481 entry in the id table

2015-11-24T04:29:27+00:00

Commit fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0
with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting
the original). Fix that.

Fixes: fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
Signed-off-by: Aaro Koskinen 
Signed-off-by: David S. Miller

net: phy: Use interrupts when available in NOLINK state

2015-11-17T20:25:44+00:00

The NOLINK state will poll the phy once a second to see if the link
has come up. If the phy has an interrupt line, this polling can be
skipped, since the phy should interrupt when the link returns.

Signed-off-by: Andrew Lunn 
Signed-off-by: David S. Miller

phy: marvell: Add support for 88E1540 PHY

2015-11-17T20:25:43+00:00

The 88E1540 can be found embedded in the Marvell 88E6352 switch.  It
is compatible with the 88E1510, so add support for it, using the
88E1510 specific functions.

Signed-off-by: Andrew Lunn 
Signed-off-by: David S. Miller

net: phy: vitesse: add support for VSC8601

2015-11-16T19:18:40+00:00

This adds support for the Vitesse VSC8601 PHY. Generic functions are
used for everything except interrupt handling.

Signed-off-by: Mans Rullgard 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

net: phy: at803x: support interrupt on 8030 and 8035

2015-11-16T19:18:40+00:00

Commit 77a993942 "phy/at8031: enable at8031 to work on interrupt mode"
added interrupt support for the 8031 PHY but left out the other two
chips supported by this driver.

This patch sets the .ack_interrupt and .config_intr functions for the
8030 and 8035 drivers as well.

Signed-off-by: Mans Rullgard 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2015-11-05T21:15:12+00:00

Pull spi updates from Mark Brown:
 "Quite a lot of activity in SPI this cycle, almost all of it in drivers
  with a few minor improvements and tweaks in the core.

   - Updates to pxa2xx to support Intel Broxton and multiple chip selects.
   - Support for big endian in the bcm63xx driver.
   - Multiple slave support for the mt8173
   - New driver for the auxiliary SPI controller in bcm2835 SoCs.
   - Support for Layerscale SoCs in the Freescale DSPI driver"

* tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
  spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI
  spi: pxa2xx: Add support for Intel Broxton
  spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals
  spi: pxa2xx: Add output control for multiple Intel LPSS chip selects
  spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific
  spi: Add DSPI support for layerscape family
  spi: ti-qspi: improve ->remove() callback
  spi/spi-xilinx: Fix race condition on last word read
  spi: Drop owner assignment from spi_drivers
  spi: Add THIS_MODULE to spi_driver in SPI core
  spi: Setup the master controller driver before setting the chipselect
  spi: dw: replace magic constant by DW_SPI_DR
  spi: mediatek: mt8173 spi multiple devices support
  spi: mediatek: handle controller_data in mtk_spi_setup
  spi: mediatek: remove mtk_spi_config
  spi: mediatek: Update document devicetree bindings to support multiple devices
  spi: fix kernel-doc warnings about missing return desc in spi.c
  spi: fix kernel-doc warnings about missing return desc in spi.h
  spi: pxa2xx: Align a few defines
  spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select
  ...

Merge remote-tracking branches 'spi/topic/omap-100k', 'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next

2015-11-04T11:02:12+00:00