linux-toradex.git/drivers/net/phy, branch v6.12-rc4

net: phy: realtek: Fix MMD access on RTL8126A-integrated PHY

2024-10-09T11:43:46+00:00

All MMD reads return 0 for the RTL8126A-integrated PHY. Therefore phylib
assumes it doesn't support EEE, what results in higher power consumption,
and a significantly higher chip temperature in my case.
To fix this split out the PHY driver for the RTL8126A-integrated PHY
and set the read_mmd/write_mmd callbacks to read from vendor-specific
registers.

Fixes: 5befa3728b85 ("net: phy: realtek: add support for RTL8126A-integrated 5Gbps PHY")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit 
Signed-off-by: David S. Miller

net: phy: Remove LED entry from LEDs list on unregister

2024-10-08T00:15:50+00:00

Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct
ordering") correctly fixed a problem with using devm_ but missed
removing the LED entry from the LEDs list.

This cause kernel panic on specific scenario where the port for the PHY
is torn down and up and the kmod for the PHY is removed.

On setting the port down the first time, the assosiacted LEDs are
correctly unregistered. The associated kmod for the PHY is now removed.
The kmod is now added again and the port is now put up, the associated LED
are registered again.
On putting the port down again for the second time after these step, the
LED list now have 4 elements. With the first 2 already unregistered
previously and the 2 new one registered again.

This cause a kernel panic as the first 2 element should have been
removed.

Fix this by correctly removing the element when LED is unregistered.

Reported-by: Daniel Golle 
Tested-by: Daniel Golle 
Cc: stable@vger.kernel.org
Fixes: c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct ordering")
Signed-off-by: Christian Marangi 
Reviewed-by: Andrew Lunn 
Link: https://patch.msgid.link/20241004182759.14032-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski

net: phy: bcm84881: Fix some error handling paths

2024-10-04T23:19:00+00:00

If phy_read_mmd() fails, the error code stored in 'bmsr' should be returned
instead of 'val' which is likely to be 0.

Fixes: 75f4d8d10e01 ("net: phy: add Broadcom BCM84881 PHY driver")
Signed-off-by: Christophe JAILLET 
Link: https://patch.msgid.link/3e1755b0c40340d00e089d6adae5bca2f8c79e53.1727982168.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski

net: phy: aquantia: remove usage of phy_set_max_speed

2024-10-03T23:16:03+00:00

Remove the use of phy_set_max_speed in phy driver as the
function is mainly used in MAC driver to set the max
speed.

Instead use get_features to fix up Phy PMA capabilities for
AQR111, AQR111B0, AQR114C and AQCS109

Fixes: 038ba1dc4e54 ("net: phy: aquantia: add AQR111 and AQR111B0 PHY ID")
Fixes: 0974f1f03b07 ("net: phy: aquantia: remove false 5G and 10G speed ability for AQCS109")
Fixes: c278ec644377 ("net: phy: aquantia: add support for AQR114C PHY ID")
Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@quicinc.com/T/
Signed-off-by: Abhishek Chauhan 
Reviewed-by: Russell King (Oracle) 
Link: https://patch.msgid.link/20241001224626.2400222-3-quic_abchauha@quicinc.com
Signed-off-by: Jakub Kicinski

net: phy: aquantia: AQR115c fix up PMA capabilities

2024-10-03T23:16:03+00:00

AQR115c reports incorrect PMA capabilities which includes
10G/5G and also incorrectly disables capabilities like autoneg
and 10Mbps support.

AQR115c as per the Marvell databook supports speeds up to 2.5Gbps
with autonegotiation.

Fixes: 0ebc581f8a4b ("net: phy: aquantia: add support for aqr115c")
Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@quicinc.com/T/
Signed-off-by: Abhishek Chauhan 
Reviewed-by: Russell King (Oracle) 
Link: https://patch.msgid.link/20241001224626.2400222-2-quic_abchauha@quicinc.com
Signed-off-by: Jakub Kicinski

net: phy: dp83869: fix memory corruption when enabling fiber

2024-10-03T22:39:47+00:00

When configuring the fiber port, the DP83869 PHY driver incorrectly
calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit
number (10). This corrupts some other memory location -- in case of
arm64 the priv pointer in the same structure.

Since the advertising flags are updated from supported at the end of the
function the incorrect line isn't needed at all and can be removed.

Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection")
Signed-off-by: Ingo van Lil 
Reviewed-by: Alexander Sverdlin 
Reviewed-by: Andrew Lunn 
Link: https://patch.msgid.link/20241002161807.440378-1-inguin@gmx.de
Signed-off-by: Jakub Kicinski

Merge tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-10-03T16:44:00+00:00

Pull networking fixes from Paolo Abeni:
 "Including fixes from ieee802154, bluetooth and netfilter.

  Current release - regressions:

   - eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc

   - eth: am65-cpsw: fix forever loop in cleanup code

  Current release - new code bugs:

   - eth: mlx5: HWS, fixed double-free in error flow of creating SQ

  Previous releases - regressions:

   - core: avoid potential underflow in qdisc_pkt_len_init() with UFO

   - core: test for not too small csum_start in virtio_net_hdr_to_skb()

   - vrf: revert "vrf: remove unnecessary RCU-bh critical section"

   - bluetooth:
       - fix uaf in l2cap_connect
       - fix possible crash on mgmt_index_removed

   - dsa: improve shutdown sequence

   - eth: mlx5e: SHAMPO, fix overflow of hd_per_wq

   - eth: ip_gre: fix drops of small packets in ipgre_xmit

  Previous releases - always broken:

   - core: fix gso_features_check to check for both
     dev->gso_{ipv4_,}max_size

   - core: fix tcp fraglist segmentation after pull from frag_list

   - netfilter: nf_tables: prevent nf_skb_duplicated corruption

   - sctp: set sk_state back to CLOSED if autobind fails in
     sctp_listen_start

   - mac802154: fix potential RCU dereference issue in
     mac802154_scan_worker

   - eth: fec: restart PPS after link state change"

* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
  sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
  dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
  doc: net: napi: Update documentation for napi_schedule_irqoff
  net/ncsi: Disable the ncsi work before freeing the associated structure
  net: phy: qt2025: Fix warning: unused import DeviceId
  gso: fix udp gso fraglist segmentation after pull from frag_list
  bridge: mcast: Fail MDB get request on empty entry
  vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
  net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
  net: phy: realtek: Check the index value in led_hw_control_get
  ppp: do not assume bh is held in ppp_channel_bridge_input()
  selftests: rds: move include.sh to TEST_FILES
  net: test for not too small csum_start in virtio_net_hdr_to_skb()
  net: gso: fix tcp fraglist segmentation after pull from frag_list
  ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
  net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
  net: add more sanity checks to qdisc_pkt_len_init()
  net: avoid potential underflow in qdisc_pkt_len_init() with UFO
  net: ethernet: ti: cpsw_ale: Fix warning on some platforms
  net: microchip: Make FDMA config symbol invisible
  ...

net: phy: qt2025: Fix warning: unused import DeviceId

2024-10-03T00:44:00+00:00

Fix the following warning when the driver is compiled as built-in:

      warning: unused import: `DeviceId`
      --> drivers/net/phy/qt2025.rs:18:5
      |
   18 |     DeviceId, Driver,
      |     ^^^^^^^^
      |
      = note: `#[warn(unused_imports)]` on by default

device_table in module_phy_driver macro is defined only when the
driver is built as a module. Use phy::DeviceId in the macro instead of
importing `DeviceId` since `phy` is always used.

Fixes: fd3eaad826da ("net: phy: add Applied Micro QT2025 PHY driver")
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202409190717.i135rfVo-lkp@intel.com/
Reviewed-by: Alice Ryhl 
Reviewed-by: Trevor Gross 
Signed-off-by: FUJITA Tomonori 
Reviewed-by: Fiona Behrens 
Acked-by: Miguel Ojeda 
Link: https://patch.msgid.link/20240926121404.242092-1-fujita.tomonori@gmail.com
Signed-off-by: Jakub Kicinski

net: phy: realtek: Check the index value in led_hw_control_get

2024-10-03T00:24:56+00:00

Just like rtl8211f_led_hw_is_supported() and
rtl8211f_led_hw_control_set(), the rtl8211f_led_hw_control_get() also
needs to check the index value, otherwise the caller is likely to get
an incorrect rules.

Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Hui Wang 
Reviewed-by: Marek Vasut 
Link: https://patch.msgid.link/20240927114610.1278935-1-hui.wang@canonical.com
Signed-off-by: Jakub Kicinski

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h