linux-toradex.git/drivers/net/sfc/Makefile, branch PD13.0.0alpha

sfc: Add support for SFE4003 board and TXC43128 PHY

2010-09-22T20:26:45+00:00

This board never went into production, but some engineering samples
are in use.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Remove support for SFN4111T, SFT9001 and Falcon GMAC

2010-09-22T20:26:45+00:00

SFN4111T never reached production and is not being used for internal
or customer testing.

Since we have no production Falcon boards using the SFT9001 or the
GMAC, remove support for them as well.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Add filter table management

2010-09-21T21:58:00+00:00

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Add support for SFC9000 family (2)

2009-11-30T01:23:57+00:00

This integrates support for the SFC9000 family of 10G Ethernet
controllers and LAN-on-motherboard chips, starting with the SFL9021
'Siena' and SFC9020 'Bethpage'.

Credit for this code is largely due to my colleagues at Solarflare:

   Guido Barzini
   Steve Hodgson
   Kieran Mansley
   Matthew Slattery
   Neil Turton

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Move shared NIC code from falcon.c to new source file nic.c

2009-11-30T01:23:55+00:00

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Rename 'xfp' file and functions to reflect reality

2009-10-24T11:27:28+00:00

The 'XFP' driver is really a driver for the QT2022C2 and QT2025C PHYs,
covering both more and less than XFP.  Rename its functions and
constants to reflect reality and to reduce namespace pollution when
sfc is a built-in driver.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Merge sfe4001.c into falcon_boards.c

2009-10-24T11:26:55+00:00

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Rename Falcon-specific board code and types

2009-10-24T11:26:52+00:00

Siena will require entirely different board code.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Add support for sub-10G speeds

2008-12-13T05:58:17+00:00

The SFC4000 has a separate MAC for use at sub-10G speeds.  Introduce
an efx_mac_operations structure with implementations for the two MACs.
Switch between the MACs as necessary.

PHY settings are independent of the MAC, so add get_settings() and
set_settings() to efx_phy_operations.  Also add macs field to indicate
which MACs the PHY is connected to.

Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller

sfc: Expose flash region storing boot code as MTD

2008-11-06T05:49:57+00:00

The boot code that appears as a PCI expansion ROM on the SFC4000 is
stored in flash.  Expose this as a standard MTD device to allow for
in-place upgrades.

Signed-off-by: Ben Hutchings 
Signed-off-by: Jeff Garzik