linux-toradex.git/drivers/net/sis190.c, branch v2.6.18

[PATCH] irq-flags: drivers/net: Use the new IRQF_ constants

2006-07-02T20:58:51+00:00

Signed-off-by: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "David S. Miller" 
Cc: Benjamin Herrenschmidt 
Cc: Jeff Garzik 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[NET]: Avoid allocating skb in skb_pad

2006-06-23T09:06:41+00:00

First of all it is unnecessary to allocate a new skb in skb_pad since
the existing one is not shared.  More importantly, our hard_start_xmit
interface does not allow a new skb to be allocated since that breaks
requeueing.

This patch uses pskb_expand_head to expand the existing skb and linearize
it if needed.  Actually, someone should sift through every instance of
skb_pad on a non-linear skb as they do not fit the reasons why this was
originally created.

Incidentally, this fixes a minor bug when the skb is cloned (tcpdump,
TCP, etc.).  As it is skb_pad will simply write over a cloned skb.  Because
of the position of the write it is unlikely to cause problems but still
it's best if we don't do it.

Signed-off-by: Herbert Xu 
Signed-off-by: David S. Miller

Massive net driver const-ification.

2006-03-04T02:33:57+00:00

sis190: early setting of the pci driver private data

2006-02-16T21:17:00+00:00

Below this point, the error path will proceed through
sis190_release_board(). It will happily oops if
pci_set_drvdata() has not been issued.

Signed-off-by: Francois Romieu

[PATCH] turn "const static" into "static const"

2006-01-10T16:01:55+00:00

ICC likes to complain about storage class not being first, GCC doesn't
care much (except for cases like "inline static").
have a hard time seeing how it could break anything.

Thanks to Gabriel A. Devenyi for pointing out
http://linuxicc.sourceforge.net/ which is what made me create this patch.

Signed-off-by: Jesper Juhl 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] sis190.c: fix multicast MAC filter

2005-10-28T20:14:11+00:00

Here is a patch that changes the way the MAC filter is computed for the
multicast addresses. The computation is taken from the SiS GPL driver.

This patch is necessary to get IPv6 working.

Signed-off-by: Aurelien Jarno 
Signed-off-by: Jeff Garzik

[PATCH] sis190: basic sis191 support

2005-09-05T22:06:53+00:00

The sis191 is the gigabit brother of the sis190. SiS's driver suggests
that the register set is backward compatible: this should hopefully
give a basic driver.

The device should allow the usual features from a modern ethernet
adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far
the relevant register layout is not documented. SiS's driver does
not provide these features either (at least not for Linux).

Signed-off-by: Francois Romieu 
Signed-off-by: Jeff Garzik

[PATCH] sis190: RGMII Tx internal delay fiddling

2005-09-05T22:06:53+00:00

Don't ask.
The patch is based on SiS's GPLed driver.

Signed-off-by: Francois Romieu 
Signed-off-by: Jeff Garzik

[PATCH] sis190: make 10Mbps the default when handling the StationControl register

2005-09-05T22:06:53+00:00

This patch does three things:
- widen the access to the StationControl register (note the SIS_W16
  versus SIS_W32 change);
- default to 10Mbps half duplex when the LPA can not be evaluated
  (reg31->ctl is identical for both). It can be argued that it makes
  sense as the lowest common denominator when everything else failed.
  Btw it works better than the current code. :o)
- remove some enums: they do not document anymore.

Signed-off-by: Francois Romieu 
Signed-off-by: Jeff Garzik

[PATCH] sis190: recent chipsets from SiS include a RGMII

2005-09-05T22:06:52+00:00

Extracted from SiS's GPLed driver. From the few pdf available at SiS's,
it seems that the 965 and the 966 south bridge include this interface
whereas the 965L (and anything below) does not. It is expected to be a
sis191 related feature and should not hurt the existing sis190 driver.

Signed-off-by: Francois Romieu 
Signed-off-by: Jeff Garzik