linux-toradex.git/drivers/net/sky2.c, branch v2.6.29

sky2: fix hard hang with netconsoling and iface going up

2009-01-30T22:06:26+00:00

Printing anything over netconsole before hw is up and running is,
of course, not going to work.

Signed-off-by: Alexey Dobriyan 
Acked-by: Stephen Hemminger 
Signed-off-by: David S. Miller

netdev: add more functions to netdevice ops

2008-11-21T04:14:53+00:00

This patch moves neigh_setup and hard_start_xmit into the network device ops
structure. For bisection, fix all the previously converted drivers as well.
Bonding driver took the biggest hit on this.

Added a prefetch of the hard_start_xmit in the fast path to try and reduce
any impact this would have.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

sky2: convert to net_device_ops

2008-11-20T06:42:44+00:00

Convert to new network device ops interface. Slight additional complexity
here because the second port does not allow netpoll and therefore has
different virtual function table.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

net: convert print_mac to %pM

2008-10-28T00:06:18+00:00

This converts pretty much everything to print_mac. There were
a few things that had conflicts which I have just dropped for
now, no harm done.

I've built an allyesconfig with this and looked at the files
that weren't built very carefully, but it's a huge patch.

Signed-off-by: Johannes Berg 
Signed-off-by: David S. Miller

sky2: Fix WOL regression

2008-10-13T03:59:48+00:00

    
Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set/unset this bit whenever WOL is enabled/disabled using
sky2_set_wol().
    
Remove an open-coded reference to the standard PCI PM registers that
is not used any more.
    
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: David S. Miller

sky2: display product info on boot.

2008-09-03T14:23:58+00:00

Change bootup messages to print more information. This is to help users
who may have old buggy EEPROM image.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

sky2: EEPROM read/write bug fixes

2008-09-03T14:23:56+00:00

Cleanup and harden the routines accessing the EEPROM.
  1. Prevent spin forever waiting for the TWSI bus
  2. Fix write eeprom to write full words rather than only 16 bits
    Luckly the vendor doesn't provide EEPROM in Linux format so it must never
    have been used.
  3. Don't allow partial eeprom writes, not needed, not safe.

These are non-urgent bug fixes.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

sky2: Fix suspend/hibernation/shutdown regression with WOL enabled (rev. 2)

2008-08-14T08:27:44+00:00

On my test box with the Asus M3A32-MVP main board there is a
regression from 2.6.26 related to suspend, hibernation and
shutdown.  Namely, if Wake-on-LAN is enabled with
'ethtool -s eth0 wol g', the box hangs solid during all of these
operations, while executing either sky2_suspend(), or
sky2_shutdown().  This patch fixes it for me.

Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Jeff Garzik

[netdrvr] remove unnecessary #include

2008-08-14T08:26:38+00:00

The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/net/acenic.c
  drivers/net/bnx2x_link.c
  drivers/net/bnx2x_main.c
  drivers/net/cpmac.c
  drivers/net/gianfar_sysfs.c
  drivers/net/ipg.h
  drivers/net/ppp_mppe.c
  drivers/net/pppol2tp.c
  drivers/net/r6040.c
  drivers/net/sh_eth.c
  drivers/net/sky2.c
  drivers/net/tehuti.h
  drivers/net/typhoon.c

This patch removes the said #include .

Signed-off-by: Huang Weiyi 
Signed-off-by: Jeff Garzik

sky2: fix PM related regressions

2008-08-07T05:55:50+00:00

Fix the problems reported for 2.6.27-rc1 caused by over aggressive
power management. Turning clock off on PCI Express is problematic for WOL,
and when doing multi-booting.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik