linux-toradex.git/drivers/net/sky2.h, branch v2.6.16.15

[PATCH] sky2: bad memory reference on dual port cards

2006-04-17T20:16:04+00:00

Sky2 driver will oops referencing bad memory if used on
a dual port card.  The problem is accessing past end of
MIB counter space.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

[PATCH] sky2: remove MSI support

2006-02-28T23:06:25+00:00

Remove Message Signaled Interrupt support (for 2.6.16).
MSI is inherently edge-triggered and that is incompatiable (without more
work) with NAPI.

In future, will replace with smarter lockless-IRQ handling like
tg3.c

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

[PATCH] sky2: close race on IRQ mask update.

2006-02-23T00:25:26+00:00

Need to avoid race in updating IRQ mask.  This can probably be replaced
smarter use of the interrupt control registers (if/when chipset
docs are available).

Signed-off-by: Stephen Hemminger

[PATCH] sky2: use device iomem to access PCI config

2006-02-23T00:25:23+00:00

To avoid problems with PCI config access without ACPI (or busted ACPI tables),
use the device's window into PCI config space.

I know this probably will upset the purists, but I would rather have users
than ACPI testers. It also generates less code.

Signed-off-by: Stephen Hemminger

[PATCH] sky2: yukon-ec-u chipset initialization

2006-02-23T00:23:36+00:00

Add more complete setup code for Yukon EC_U chipset.
Based on matching code in 8.31 code in SysKonnect vendor driver.

Signed-off-by: Stephen Hemminger

[PATCH] sky2: support msi interrupt (revised)

2006-02-07T07:00:36+00:00

This hardware supports Message Signaled interrupts.
When setting up, use software interrupt to check for bad hardware.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

[PATCH] sky2: pci config space checking

2006-02-07T07:00:35+00:00

There were bugs in mmconfig access to PCI space, up to and
include 2.6.16-rc1. These prevented the sky2 driver from being
able to clear PCI express errors.

This patch makes the driver check (during probe), for errors
in PCI config access and fail.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

[PATCH] sky2: tx/rx ring data structure split

2005-12-12T20:27:20+00:00

Split Tx and Rx ring into two different data structures.
Tx needs the next value (to handle partial status), and
Rx always needs the mapaddr (to handle resubmitting same buffer).

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

[PATCH] sky2: map length optimization

2005-12-12T20:27:20+00:00

Don't need to keep track of mapping length in ring structure
because we can get the same info from other info.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik

[PATCH] sky2: phy processing in workqueue rather than tasklet

2005-12-12T20:27:20+00:00

Do phy processing in a work queue rather than a tasklet.
This means we can let bottom halves run.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Jeff Garzik