linux-toradex.git/drivers/net/tulip, branch v3.0.53

tulip: dmfe: Remove old log spamming pr_debugs

2011-07-18T17:44:44+00:00

Commit 726b65ad444d ("tulip: Convert uses of KERN_DEBUG") enabled
some old previously inactive uses of pr_debug converted by
commit dde7c8ef1679 ("tulip/dmfe.c: Use dev_ and pr_").

Remove these pr_debugs.

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

Revert "net: fix section mismatches"

2011-06-01T02:28:32+00:00

This reverts commit e5cb966c0838e4da43a3b0751bdcac7fe719f7b4.

It causes new build regressions with gcc-4.2 which is
pretty common on non-x86 platforms.

Reported-by: James Bottomley 
Signed-off-by: David S. Miller

tulip: Use pr_ where appropriate

2011-05-09T19:51:16+00:00

Use the current logging styles.

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

tulip: Convert uses of KERN_DEBUG

2011-05-09T19:51:15+00:00

Convert logging messages to more current styles.

Added -DDEBUG to Makefile to maintain current message logging.
This could be converted to a specific CONFIG_TULIP_DEBUG option.

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

tulip: Convert printks to netdev_

2011-05-09T19:51:15+00:00

Use the current more descriptive logging styles.

Add pr_fmt and remove PFX where appropriate.
Use netif_, netdev_
Indent a few blocks in xircom_cb where appropriate.

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

tulip: xircom_cb: Convert #ifdef DEBUG blocks and enter/leave uses

2011-05-09T19:51:14+00:00

Change the blocks that are guarded by #if DEBUG to
be #if defined DEBUG && DEBUG > 1 so that pr_debug
can be used later.

Remove enter/leave macros and uses.

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

tulip/de2104x: don't report different speeds depending on port type

2011-04-29T21:03:02+00:00

Initial driver reported different speeds depending on the port being
used. This advertises the speed to be 10Mbps in any case, which is
what it actually is on the wire.

Signed-off-by: David Decotigny 
Signed-off-by: David S. Miller

ethtool: cosmetic: Use ethtool ethtool_cmd_speed API

2011-04-29T21:03:01+00:00

This updates the network drivers so that they don't access the
ethtool_cmd::speed field directly, but use ethtool_cmd_speed()
instead.

For most of the drivers, these changes are purely cosmetic and don't
fix any problem, such as for those 1GbE/10GbE drivers that indirectly
call their own ethtool get_settings()/mii_ethtool_gset(). The changes
are meant to enforce code consistency and provide robustness with
future larger throughputs, at the expense of a few CPU cycles for each
ethtool operation.

All drivers compiled with make allyesconfig ion x86_64 have been
updated.

Tested: make allyesconfig on x86_64 + e1000e/bnx2x work
Signed-off-by: David Decotigny 
Signed-off-by: David S. Miller

ethtool: Use full 32 bit speed range in ethtool's set_settings

2011-04-29T21:03:00+00:00

This makes sure the ethtool's set_settings() callback of network
drivers don't ignore the 16 most significant bits when ethtool calls
their set_settings().

All drivers compiled with make allyesconfig on x86_64 have been
updated.

Signed-off-by: David Decotigny 
Signed-off-by: David S. Miller

net: fix section mismatches

2011-04-19T05:59:04+00:00

Fix build warnings like the following:

WARNING: drivers/net/built-in.o(.data+0x12434): Section mismatch in reference from the variable madgemc_driver to the variable .init.data:madgemc_adapter_ids

And add some consts to EISA device ID tables along the way.

Signed-off-by: Michał Mirosław 
Signed-off-by: David S. Miller