linux-toradex.git/drivers/net/usb/cdc_ether.c, branch v3.6.1

Merge tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2012-05-22T22:50:46+00:00

Pull USB 3.5-rc1 changes from Greg Kroah-Hartman:
"Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window.

It's touches a lot of different parts of the kernel, all USB drivers,
due to some API cleanups (getting rid of the ancient err() macro) and
some changes that are needed for USB 3.0 power management updates.

There are also lots of new drivers, pimarily gadget, but others as
well. We deleted a staging driver, which was nice, and finally
dropped the obsolete usbfs code, which will make Al happy to never
have to touch that again.

There were some build errors in the tree that linux-next found a few
days ago, but those were fixed by the most recent changes (all were
due to us not building with CONFIG_PM disabled.)

Signed-off-by: Greg Kroah-Hartman "

* tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits)
xhci: Fix DIV_ROUND_UP compile error.
xhci: Fix compile with CONFIG_USB_SUSPEND=n
USB: Fix core compile with CONFIG_USB_SUSPEND=n
brcm80211: Fix compile error for .disable_hub_initiated_lpm.
Revert "USB: EHCI: work around bug in the Philips ISP1562 controller"
MAINTAINERS: Add myself as maintainer to the USB PHY Layer
USB: EHCI: fix command register configuration lost problem
USB: Remove races in devio.c
USB: ehci-platform: remove update_device
USB: Disable hub-initiated LPM for comms devices.
xhci: Add Intel U1/U2 timeout policy.
xhci: Add infrastructure for host-specific LPM policies.
USB: Add macros for interrupt endpoint types.
xhci: Reserve one command for USB3 LPM disable.
xhci: Some Evaluate Context commands must succeed.
USB: Disable USB 3.0 LPM in critical sections.
USB: Add support to enable/disable USB3 link states.
USB: Allow drivers to disable hub-initiated LPM.
USB: Calculate USB 3.0 exit latencies for LPM.
USB: Refactor code to set LPM support flag.
...

Conflicts:
arch/arm/mach-exynos/mach-nuri.c
arch/arm/mach-exynos/mach-universal_c210.c
drivers/net/wireless/ath/ath6kl/usb.c

net: cdc_ether: Add ZTE WWAN matches before generic Ethernet

2012-05-19T22:47:48+00:00

Some ZTE WWAN devices have generic CDC Ether descriptors. Add those
into the whitelist so that we get FLAG_WWAN on the interface

Signed-off-by: Andrew Bird 
Signed-off-by: David S. Miller

USB: Disable hub-initiated LPM for comms devices.

2012-05-18T22:42:55+00:00

Hub-initiated LPM is not good for USB communications devices.  Comms
devices should be able to tell when their link can go into a lower power
state, because they know when an incoming transmission is finished.
Ideally, these devices would slam their links into a lower power state,
using the device-initiated LPM, after finishing the last packet of their
data transfer.

If we enable the idle timeouts for the parent hubs to enable
hub-initiated LPM, we will get a lot of useless LPM packets on the bus
as the devices reject LPM transitions when they're in the middle of
receiving data.  Worse, some devices might blindly accept the
hub-initiated LPM and power down their radios while they're in the
middle of receiving a transmission.

The Intel Windows folks are disabling hub-initiated LPM for all USB
communications devices under a xHCI USB 3.0 host.  In order to keep
the Linux behavior as close as possible to Windows, we need to do the
same in Linux.

Set the disable_hub_initiated_lpm flag for for all USB communications
drivers.  I know there aren't currently any USB 3.0 devices that
implement these class specifications, but we should be ready if they do.

Signed-off-by: Sarah Sharp 
Cc: Marcel Holtmann 
Cc: Gustavo Padovan 
Cc: Johan Hedberg 
Cc: Hansjoerg Lipp 
Cc: Tilman Schmidt 
Cc: Karsten Keil 
Cc: Peter Korsgaard 
Cc: Jan Dumon 
Cc: Petko Manolov 
Cc: Steve Glendinning 
Cc: "John W. Linville" 
Cc: Kalle Valo 
Cc: "Luis R. Rodriguez" 
Cc: Jouni Malinen 
Cc: Vasanthakumar Thiagarajan 
Cc: Senthil Balasubramanian 
Cc: Christian Lamparter 
Cc: Brett Rudley 
Cc: Roland Vossen 
Cc: Arend van Spriel 
Cc: "Franky (Zhenhui) Lin" 
Cc: Kan Yan 
Cc: Dan Williams 
Cc: Jussi Kivilinna 
Cc: Ivo van Doorn 
Cc: Gertjan van Wingerde 
Cc: Helmut Schaa 
Cc: Herton Ronaldo Krzesinski 
Cc: Hin-Tak Leung 
Cc: Larry Finger 
Cc: Chaoming Li 
Cc: Daniel Drake 
Cc: Ulrich Kunitz 
Signed-off-by: Sarah Sharp

cdc_ether: add Novatel USB551L device IDs for FLAG_WWAN

2012-05-15T17:41:43+00:00

Needs to be tagged with FLAG_WWAN, which since it has generic
descriptors, won't happen if we don't override the generic
driver info.

Cc: Oliver Neukum 
Cc: stable@vger.kernel.org
Signed-off-by: Dan Williams 
Acked-by: Oliver Neukum 
Signed-off-by: David S. Miller

cdc_ether: Ignore bogus union descriptor for RNDIS devices

2012-05-06T17:11:55+00:00

Some RNDIS devices include a bogus CDC Union descriptor pointing
to non-existing interfaces.  The RNDIS code is already prepared
to handle devices without a CDC Union descriptor by hardwiring
the driver to use interfaces 0 and 1, which is correct for the
devices with the bogus descriptor as well. So we can reuse the
existing workaround.

Cc: Markus Kolb 
Cc: Iker Salmón San Millán 
Cc: Jonathan Nieder 
Cc: Oliver Neukum 
Cc: 655387@bugs.debian.org
Cc: stable@vger.kernel.org
Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller

Move Logitech Harmony 900 from cdc_ether to zaurus

2012-02-22T20:50:23+00:00

In the current kernel implementation, the Logitech Harmony 900 remote
control is matched to the cdc_ether driver through the generic
USB_CDC_SUBCLASS_MDLM entry.  However, this device appears to be of the
pseudo-MDLM (Belcarra) type, rather than the standard one.  This patch
blacklists the Harmony 900 from the cdc_ether driver and whitelists it for
the pseudo-MDLM driver in zaurus.

Signed-off-by: Scott Talbert 
Signed-off-by: David S. Miller

Merge branch 'driver-core-next' into Linux 3.2

2012-01-06T19:42:52+00:00

This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.

The microcode_core.c patch was provided by Stephen Rothwell
 who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.

Signed-off-by: Greg Kroah-Hartman

USB: convert drivers/net/* to use module_usb_driver()

2011-11-18T17:44:20+00:00

This converts the drivers in drivers/net/* to use the
module_usb_driver() macro which makes the code smaller and a bit
simpler.

Added bonus is that it removes some unneeded kernel log messages about
drivers loading and/or unloading.

Cc: Wolfgang Grandegger 
Cc: Samuel Ortiz 
Cc: Oliver Neukum 
Cc: Peter Korsgaard 
Cc: Petko Manolov 
Cc: Steve Glendinning 
Cc: Christian Lamparter 
Cc: "John W. Linville" 
Cc: Dan Williams 
Cc: Jussi Kivilinna 
Cc: Ivo van Doorn 
Cc: Gertjan van Wingerde 
Cc: Helmut Schaa 
Cc: Herton Ronaldo Krzesinski 
Cc: Hin-Tak Leung 
Cc: Larry Finger 
Cc: Chaoming Li 
Cc: Lucas De Marchi 
Cc: "David S. Miller" 
Cc: Roel Kluin 
Cc: Paul Gortmaker 
Cc: Jiri Pirko 
Cc: Pavel Roskin 
Cc: Yoann DI-RUZZA 
Cc: George 
Signed-off-by: Greg Kroah-Hartman

net/usb: Misc. fixes for the LG-VL600 LTE USB modem

2011-11-14T05:49:05+00:00

Add checking for valid magic values (needed for stability in the event
corrupted packets are received) and remove some other unneeded checks.
Also, fix flagging device as WWAN (Bugzilla bug #39952).

Signed-off-by: Mark Kamichoff 
Signed-off-by: David S. Miller

net/usb: mark LG VL600 LTE modem ethernet interface as WWAN

2011-05-10T22:03:50+00:00

Like other mobile broadband device ethernet interfaces, mark the LG
VL600 with the 'wwan' devtype so userspace knows it needs additional
configuration via the AT port before the interface can be used.

Signed-off-by: Dan Williams 
Signed-off-by: David S. Miller