linux-toradex.git/drivers/net/usb/ipheth.c, branch v3.10.12

usb/ipheth: Add iPhone 5 support

2012-10-18T19:34:30+00:00

I noticed that the iPhone ethernet driver did not support
iPhone 5. I quickly added support to it in my kernel, here's
a patch.

Signed-off-by: Jay Purohit 
Acked-by: Valdis Kletnieks 
Signed-off-by: Jan Ceuleers 
Signed-off-by: David S. Miller

ipheth: add support for iPad

2012-06-25T23:20:41+00:00

This adds support for the iPad to the ipheth driver.
(product id = 0x129a)

Signed-off-by: Davide Gerhard 
Signed-off-by: David S. Miller

USB: Disable hub-initiated LPM for comms devices.

2012-05-18T22:42:55+00:00

Hub-initiated LPM is not good for USB communications devices.  Comms
devices should be able to tell when their link can go into a lower power
state, because they know when an incoming transmission is finished.
Ideally, these devices would slam their links into a lower power state,
using the device-initiated LPM, after finishing the last packet of their
data transfer.

If we enable the idle timeouts for the parent hubs to enable
hub-initiated LPM, we will get a lot of useless LPM packets on the bus
as the devices reject LPM transitions when they're in the middle of
receiving data.  Worse, some devices might blindly accept the
hub-initiated LPM and power down their radios while they're in the
middle of receiving a transmission.

The Intel Windows folks are disabling hub-initiated LPM for all USB
communications devices under a xHCI USB 3.0 host.  In order to keep
the Linux behavior as close as possible to Windows, we need to do the
same in Linux.

Set the disable_hub_initiated_lpm flag for for all USB communications
drivers.  I know there aren't currently any USB 3.0 devices that
implement these class specifications, but we should be ready if they do.

Signed-off-by: Sarah Sharp 
Cc: Marcel Holtmann 
Cc: Gustavo Padovan 
Cc: Johan Hedberg 
Cc: Hansjoerg Lipp 
Cc: Tilman Schmidt 
Cc: Karsten Keil 
Cc: Peter Korsgaard 
Cc: Jan Dumon 
Cc: Petko Manolov 
Cc: Steve Glendinning 
Cc: "John W. Linville" 
Cc: Kalle Valo 
Cc: "Luis R. Rodriguez" 
Cc: Jouni Malinen 
Cc: Vasanthakumar Thiagarajan 
Cc: Senthil Balasubramanian 
Cc: Christian Lamparter 
Cc: Brett Rudley 
Cc: Roland Vossen 
Cc: Arend van Spriel 
Cc: "Franky (Zhenhui) Lin" 
Cc: Kan Yan 
Cc: Dan Williams 
Cc: Jussi Kivilinna 
Cc: Ivo van Doorn 
Cc: Gertjan van Wingerde 
Cc: Helmut Schaa 
Cc: Herton Ronaldo Krzesinski 
Cc: Hin-Tak Leung 
Cc: Larry Finger 
Cc: Chaoming Li 
Cc: Daniel Drake 
Cc: Ulrich Kunitz 
Signed-off-by: Sarah Sharp

USB: ipheth.c: remove err() usage

2012-04-25T19:37:48+00:00

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

Signed-off-by: Greg Kroah-Hartman

ipheth: Add iPhone 4S

2012-02-15T19:50:16+00:00

BugLink: http://bugs.launchpad.net/bugs/900802

Cc: stable@vger.kernel.org 3.2+
Signed-off-by: Till Kamppeter 
Signed-off-by: Tim Gardner 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2012-01-09T22:46:52+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  igmp: Avoid zero delay when receiving odd mixture of IGMP queries
  netdev: make net_device_ops const
  bcm63xx: make ethtool_ops const
  usbnet: make ethtool_ops const
  net: Fix build with INET disabled.
  net: introduce netif_addr_lock_nested() and call if when appropriate
  net: correct lock name in dev_[uc/mc]_sync documentations.
  net: sk_update_clone is only used in net/core/sock.c
  8139cp: fix missing napi_gro_flush.
  pktgen: set correct max and min in pktgen_setup_inject()
  smsc911x: Unconditionally include linux/smscphy.h in smsc911x.h
  asix: fix infinite loop in rx_fixup()
  net: Default UDP and UNIX diag to 'n'.
  r6040: fix typo in use of MCR0 register bits
  net: fix sock_clone reference mismatch with tcp memcontrol

usbnet: make ethtool_ops const

2012-01-09T22:05:23+00:00

The ethtool_ops table of function pointers should be const.
Fix all the usb network drivers.

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller

USB: convert drivers/net/* to use module_usb_driver()

2011-11-18T17:44:20+00:00

This converts the drivers in drivers/net/* to use the
module_usb_driver() macro which makes the code smaller and a bit
simpler.

Added bonus is that it removes some unneeded kernel log messages about
drivers loading and/or unloading.

Cc: Wolfgang Grandegger 
Cc: Samuel Ortiz 
Cc: Oliver Neukum 
Cc: Peter Korsgaard 
Cc: Petko Manolov 
Cc: Steve Glendinning 
Cc: Christian Lamparter 
Cc: "John W. Linville" 
Cc: Dan Williams 
Cc: Jussi Kivilinna 
Cc: Ivo van Doorn 
Cc: Gertjan van Wingerde 
Cc: Helmut Schaa 
Cc: Herton Ronaldo Krzesinski 
Cc: Hin-Tak Leung 
Cc: Larry Finger 
Cc: Chaoming Li 
Cc: Lucas De Marchi 
Cc: "David S. Miller" 
Cc: Roel Kluin 
Cc: Paul Gortmaker 
Cc: Jiri Pirko 
Cc: Pavel Roskin 
Cc: Yoann DI-RUZZA 
Cc: George 
Signed-off-by: Greg Kroah-Hartman

ipheth: iPhone 4 Verizon CDMA USB Product ID add

2011-09-15T18:49:44+00:00

Add USB product ID for iPhone 4 CDMA Verizon
Tested on at least 2 devices

Signed-off-by: Kavan Smith 
Signed-off-by: David S. Miller

iph: use default get_stats

2011-06-09T00:05:29+00:00

This driver keeps stats in net_device stats therefore it
does not need to define it's own get_stats hook.

Also, use standard format for net_device_ops (without &).

Signed-off-by: Stephen Hemminger 
Signed-off-by: David S. Miller