linux-toradex.git/drivers/net/usb, branch tegra-9.12.4

tegra: usbnet workaround for 32Byte buffer allignment requirement

2010-01-07T19:20:37+00:00

Work-around for Tegra USB EHCI host controller limitation. Outgoing USB
network packets must be 32 byte alligned.

Bug 631234, 634022, 638227

Change-Id: Iba7be8305037e93df4d47d9b1f63a0907fafded1

cdc_ether: add vendor and product IDs for a number of additional modems

2009-12-08T21:53:01+00:00

smsc95xx: add support for SMSC 9514 USB ethernet device

2009-12-08T21:52:59+00:00

fixes a few bugs with skid buffer usage, adds device ID for SMSC 9514

usbnet: add FLAG_SEND_ZLP

2009-12-08T21:52:57+00:00

some hardware requires transmitting zero-length packets and not the one-byte
packet that is currently being transmitted

dm9601: new vendor/product IDs

2009-03-04T07:48:16+00:00

Add vendor/product IDs for new no name dm9601 compatible usb ethernet
adaptors.

Reported-by: Eric Lauriault 
Signed-off-by: Peter Korsgaard 
Signed-off-by: David S. Miller

zaurus: add usb id for motomagx phones

2009-03-02T04:48:08+00:00

The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing
combined ACM/BLAN USB configuration. Since it has Vendor Specific
class, the corresponding drivers (cdc-acm, zaurus) can't find it just
by interface info. This patch adds usb id so the zaurus driver can
properly handle this combined device.

Signed-off-by: Dmitriy Taychenachev 
Signed-off-by: David S. Miller

usbnet: make usbnet_get_link() fall back to ethtool_op_get_link()

2009-03-02T04:45:40+00:00

Make usbnet_get_link() fall back to ethtool_op_get_link() instead of
defaulting to 1.  
     
This makes usbnet_get_link return valid results without the need for a
driver specific check_connect or mii ops as long as the driver calls
netif_carrier_{on,off}() as appropriate.  cdc_ether is an example of
such a driver.

Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller

cdc_ether: add usb id for Ericsson F3507g

2009-03-02T04:44:21+00:00

The Ericsson F3507g wireless broadband module provides a CDC Ethernet
compliant interface, but identifies it as a "Mobile Direct Line" CDC
subclass, thereby preventing the CDC Ethernet class driver from picking
it up.  This patch adds the device id to cdc_ether.c as a workaround.

Ericsson has provided a "class" driver for this device:
http://kerneltrap.org/mailarchive/linux-net/2008/10/28/3832094
But closer inspection of that driver reveals that it adds little more
than duplication of code from cdc_ether.c.  See also
http://marc.info/?l=linux-usb&m=123334979706403&w=2

Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller

asix: new device ids

2009-02-25T07:52:24+00:00

This patch adds two new device ids to the asix driver.

One comes directly from the asix driver on their web site, the other was
reported by Armani Liao as needed for the MSI X320 to get the driver to
work properly for it.

Reported-by: Armani Liao 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: David S. Miller

hso: add new device id's

2009-02-03T23:13:26+00:00

This patch adds a few device ID's. It also removes an ID that was used
in an internal engineering version of a device and will never see
commercial light. Even if this ID will be 'recycled' in the future,
which is very unlikely, we don't know what kind of device will be
behind it. Therefore it's safer to remove it.

Signed-off-by: Filip Aben 
Signed-off-by: David S. Miller