linux-toradex.git/drivers/net/vxlan.c, branch v4.4.106

vxlan: do not age static remote mac entries

2017-07-05T12:37:19+00:00

[ Upstream commit efb5f68f32995c146944a9d4257c3cf8eae2c4a1 ]

Mac aging is applicable only for dynamically learnt remote mac
entries. Check for user configured static remote mac entries
and skip aging.

Signed-off-by: Balakrishnan Raman 
Signed-off-by: Roopa Prabhu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

vxlan: fix use-after-free on deletion

2017-06-14T11:16:19+00:00

[ Upstream commit a53cb29b0af346af44e4abf13d7e59f807fba690 ]

Adding a vxlan interface to a socket isn't symmetrical, while adding
is done in vxlan_open() the deletion is done in vxlan_dellink().
This can cause a use-after-free error when we close the vxlan
interface before deleting it.

We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call
it from vxlan_stop() to match the call from vxlan_open().

Fixes: 56ef9c909b40 ("vxlan: Move socket initialization to within rtnl scope")
Acked-by: Jiri Benc 
Tested-by: Roi Dayan 
Signed-off-by: Mark Bloch 
Acked-by: Roopa Prabhu 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

vxlan: correctly validate VXLAN ID against VXLAN_N_VID

2017-03-22T11:04:13+00:00

[ Upstream commit 4e37d6911f36545b286d15073f6f2222f840e81c ]

The incorrect check caused an off-by-one error: the maximum VID 0xffffff
was unusable.

Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Matthias Schiffer 
Acked-by: Jiri Benc 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: add recursion limit to GRO

2016-11-15T06:46:38+00:00

[ Upstream commit fcd91dd449867c6bfe56a81cabba76b829fd05cd ]

Currently, GRO can do unlimited recursion through the gro_receive
handlers.  This was fixed for tunneling protocols by limiting tunnel GRO
to one level with encap_mark, but both VLAN and TEB still have this
problem.  Thus, the kernel is vulnerable to a stack overflow, if we
receive a packet composed entirely of VLAN headers.

This patch adds a recursion counter to the GRO layer to prevent stack
overflow.  When a gro_receive function hits the recursion limit, GRO is
aborted for this skb and it is processed normally.  This recursion
counter is put in the GRO CB, but could be turned into a percpu counter
if we run out of space in the CB.

Thanks to Vladimír Beneš  for the initial bug report.

Fixes: CVE-2016-7039
Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.")
Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan")
Signed-off-by: Sabrina Dubroca 
Reviewed-by: Jiri Benc 
Acked-by: Hannes Frederic Sowa 
Acked-by: Tom Herbert 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices

2016-06-24T17:18:18+00:00

[ Upstream commit 7e059158d57b79159eaf1f504825d19866ef2c42 ]

Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could
transmit vxlan packets of any size, constrained only by the ability to
send out the resulting packets.  4.3 introduced netdevs corresponding
to tunnel vports.  These netdevs have an MTU, which limits the size of
a packet that can be successfully encapsulated.  The default MTU
values are low (1500 or less), which is awkwardly small in the context
of physical networks supporting jumbo frames, and leads to a
conspicuous change in behaviour for userspace.

Instead, set the MTU on openvswitch-created netdevs to be the relevant
maximum (i.e. the maximum IP packet size minus any relevant overhead),
effectively restoring the behaviour prior to 4.3.

Signed-off-by: David Wragg 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

vxlan: Relax MTU constraints

2016-06-24T17:18:17+00:00

[ Upstream commit 72564b59ffc438ea103b0727a921aaddce766728 ]

Allow the MTU of vxlan devices without an underlying device to be set
to larger values (up to a maximum based on IP packet limits and vxlan
overhead).

Previously, their MTUs could not be set to higher than the
conventional ethernet value of 1500.  This is a very arbitrary value
in the context of vxlan, and prevented vxlan devices from being able
to take advantage of jumbo frames etc.

The default MTU remains 1500, for compatibility.

Signed-off-by: David Wragg 
Acked-by: Roopa Prabhu 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

vxlan: Accept user specified MTU value when create new vxlan link

2016-06-24T17:18:17+00:00

[ Upstream commit ce577668a426c6a9e2470a09dcd07fbd6e45272a ]

When create a new vxlan link, example:
  ip link add vtap mtu 1440 type vxlan vni 1 dev eth0

The argument "mtu" has no effect, because it is not set to conf->mtu. The
default value is used in vxlan_dev_configure function.

This problem was introduced by commit 0dfbdf4102b9 (vxlan: Factor out device
configuration).

Fixes: 0dfbdf4102b9 (vxlan: Factor out device configuration)
Signed-off-by:  Chen Haiquan 
Acked-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

udp: prevent skbs lingering in tunnel socket queues

2016-06-24T17:18:16+00:00

[ Upstream commit e5aed006be918af163eb397e45aa5ea6cefd5e01 ]

In case we find a socket with encapsulation enabled we should call
the encap_recv function even if just a udp header without payload is
available. The callbacks are responsible for correctly verifying and
dropping the packets.

Also, in case the header validation fails for geneve and vxlan we
shouldn't put the skb back into the socket queue, no one will pick
them up there.  Instead we can simply discard them in the respective
encap_recv functions.

Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

vxlan: fix missing options_len update on RX with collect metadata

2016-04-20T06:41:59+00:00

[ Upstream commit 4024fcf70556311521e7b6cf79fa50e16f31013a ]

When signalling to metadata consumers that the metadata_dst entry
carries additional GBP extension data for vxlan (TUNNEL_VXLAN_OPT),
the dst's vxlan_metadata information is populated, but options_len
is left to zero. F.e. in ovs, ovs_flow_key_extract() checks for
options_len before extracting the data through ip_tunnel_info_opts_get().

Geneve uses ip_tunnel_info_opts_set() helper in receive path, which
sets options_len internally, vxlan however uses ip_tunnel_info_opts(),
so when filling vxlan_metadata, we do need to update options_len.

Fixes: 4c22279848c5 ("ip-tunnel: Use API to access tunnel metadata options.")
Signed-off-by: Daniel Borkmann 
Acked-by: Thomas Graf 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tunnels: Allow IPv6 UDP checksums to be correctly controlled.

2016-03-03T23:07:04+00:00

[ Upstream commit 35e2d1152b22eae99c961affbe85374bef05a775 ]

When configuring checksums on UDP tunnels, the flags are different
for IPv4 vs. IPv6 (and reversed). However, when lightweight tunnels
are enabled the flags used are always the IPv4 versions, which are
ignored in the IPv6 code paths. This uses the correct IPv6 flags, so
checksums can be controlled appropriately.

Fixes: a725e514 ("vxlan: metadata based tunneling for IPv6")
Fixes: abe492b4 ("geneve: UDP checksum configuration via netlink")
Signed-off-by: Jesse Gross 
Acked-by: Jiri Benc 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman