linux-toradex.git/drivers/net/wan/cosa.c, branch v5.3.2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61

2019-05-24T15:36:45+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  675 mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 441 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Michael Ellerman  (powerpc)
Reviewed-by: Richard Fontana 
Reviewed-by: Allison Randal 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman

net: wan: cosa: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles

2019-02-25T22:36:15+00:00

dev_consume_skb_irq() should be called in cosa_net_tx_done() when skb
xmit done. It makes drop profiles(dropwatch, perf) more friendly.

Signed-off-by: Yang Wei 
Signed-off-by: David S. Miller

the rest of drivers/*: annotate ->poll() instances

2017-11-28T16:06:58+00:00

Signed-off-by: Al Viro

Annotate hardware config module parameters in drivers/net/wan/

2017-04-20T11:02:32+00:00

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/wan/.

Suggested-by: Alan Cox 
Signed-off-by: David Howells 
cc: "Jan \"Yenya\" Kasprzak" 
cc: netdev@vger.kernel.org

sched/headers: Prepare to move signal wakeup & sigpending methods from into

2017-03-02T07:42:32+00:00

Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

net: use core MTU range checking in WAN drivers

2016-10-20T18:51:09+00:00

- set min/max_mtu in all hdlc drivers, remove hdlc_change_mtu
- sent max_mtu in lec driver, remove lec_change_mtu
- set min/max_mtu in x25_asy driver

CC: netdev@vger.kernel.org
CC: Krzysztof Halasa 
CC: Krzysztof Halasa 
CC: Jan "Yenya" Kasprzak 
CC: Francois Romieu 
CC: Kevin Curtis 
CC: Zhao Qiang 
Signed-off-by: Jarod Wilson 
Signed-off-by: David S. Miller

treewide: replace dev->trans_start update with helper

2016-05-04T18:16:49+00:00

Replace all trans_start updates with netif_trans_update helper.
change was done via spatch:

struct net_device *d;
@@
- d->trans_start = jiffies
+ netif_trans_update(d)

Compile tested only.

Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-xtensa@linux-xtensa.org
Cc: linux1394-devel@lists.sourceforge.net
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Florian Westphal 
Acked-by: Felipe Balbi 
Acked-by: Mugunthan V N 
Acked-by: Antonio Quartulli 
Signed-off-by: David S. Miller

cosa: missing error code on failure in probe()

2015-08-12T23:53:11+00:00

If register_hdlc_device() fails, the current code returns 0 but we
should return an error code instead.

Signed-off-by: Dan Carpenter 
Signed-off-by: David S. Miller

cosa: use msecs_to_jiffies for conversions

2015-06-08T06:45:39+00:00

API compliance scanning with coccinelle flagged:
./drivers/net/wan/cosa.c:520:2-18: WARNING:
	timeout (30) seems HZ dependent

Numeric constants passed to schedule_timeout() make the effective
timeout HZ dependent which makes little sense in a device probe.
Fixed up by converting the constant to jiffies with msecs_to_jiffies()

Signed-off-by: Nicholas Mc Guire 
Signed-off-by: David S. Miller

cosa: fix error return code

2015-04-07T19:21:55+00:00

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// 
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// 

Signed-off-by: Julia Lawall 
Signed-off-by: David S. Miller