linux-toradex.git/drivers/net/wireguard, branch v6.0-rc4 Linux kernel for Apalis and Colibri modules Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2022-08-04T18:05:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-04T18:05:48+00:00 228dfe98a313f6b6bff5da8b2c5e650e297ebf1a Pull char / misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem changes for 6.0-rc1. Highlights include: - large set of IIO driver updates, additions, and cleanups - new habanalabs device support added (loads of register maps much like GPUs have) - soundwire driver updates - phy driver updates - slimbus driver updates - tiny virt driver fixes and updates - misc driver fixes and updates - interconnect driver updates - hwtracing driver updates - fpga driver updates - extcon driver updates - firmware driver updates - counter driver update - mhi driver fixes and updates - binder driver fixes and updates - speakup driver fixes All of these have been in linux-next for a while without any reported problems" * tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits) drivers: lkdtm: fix clang -Wformat warning char: remove VR41XX related char driver misc: Mark MICROCODE_MINOR unused spmi: trace: fix stack-out-of-bound access in SPMI tracing functions dt-bindings: iio: adc: Add compatible for MT8188 iio: light: isl29028: Fix the warning in isl29028_remove() iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes iio: fix iio_format_avail_range() printing for none IIO_VAL_INT iio: adc: max1027: unlock on error path in max1027_read_single_value() iio: proximity: sx9324: add empty line in front of bullet list iio: magnetometer: hmc5843: Remove duplicate 'the' iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() ... 
Pull char / misc driver updates from Greg KH:
 "Here is the large set of char and misc and other driver subsystem
  changes for 6.0-rc1.

  Highlights include:

   - large set of IIO driver updates, additions, and cleanups

   - new habanalabs device support added (loads of register maps much
     like GPUs have)

   - soundwire driver updates

   - phy driver updates

   - slimbus driver updates

   - tiny virt driver fixes and updates

   - misc driver fixes and updates

   - interconnect driver updates

   - hwtracing driver updates

   - fpga driver updates

   - extcon driver updates

   - firmware driver updates

   - counter driver update

   - mhi driver fixes and updates

   - binder driver fixes and updates

   - speakup driver fixes

  All of these have been in linux-next for a while without any reported
  problems"

* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
  drivers: lkdtm: fix clang -Wformat warning
  char: remove VR41XX related char driver
  misc: Mark MICROCODE_MINOR unused
  spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
  dt-bindings: iio: adc: Add compatible for MT8188
  iio: light: isl29028: Fix the warning in isl29028_remove()
  iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  iio: adc: max1027: unlock on error path in max1027_read_single_value()
  iio: proximity: sx9324: add empty line in front of bullet list
  iio: magnetometer: hmc5843: Remove duplicate 'the'
  iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  ...
wireguard: allowedips: don't corrupt stack when detecting overflow 2022-08-02T20:47:50+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-08-02T12:56:12+00:00 c31b14d86dfe7174361e8c6e5df6c2c3a4d5918c In case push_rcu() and related functions are buggy, there's a WARN_ON(len >= 128), which the selftest tries to hit by being tricky. In case it is hit, we shouldn't corrupt the kernel's stack, though; otherwise it may be hard to even receive the report that it's buggy. So conditionalize the stack write based on that WARN_ON()'s return value. Note that this never *actually* happens anyway. The WARN_ON() in the first place is bounded by IS_ENABLED(DEBUG), and isn't expected to ever actually hit. This is just a debugging sanity check. Additionally, hoist the constant 128 into a named enum, MAX_ALLOWEDIPS_BITS, so that it's clear why this value is chosen. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/all/CAHk-=wjJZGA6w_DxA+k7Ejbqsq+uGK==koPai3sqdsfJqemvag@mail.gmail.com/ Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
In case push_rcu() and related functions are buggy, there's a
WARN_ON(len >= 128), which the selftest tries to hit by being tricky. In
case it is hit, we shouldn't corrupt the kernel's stack, though;
otherwise it may be hard to even receive the report that it's buggy. So
conditionalize the stack write based on that WARN_ON()'s return value.

Note that this never *actually* happens anyway. The WARN_ON() in the
first place is bounded by IS_ENABLED(DEBUG), and isn't expected to ever
actually hit. This is just a debugging sanity check.

Additionally, hoist the constant 128 into a named enum,
MAX_ALLOWEDIPS_BITS, so that it's clear why this value is chosen.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjJZGA6w_DxA+k7Ejbqsq+uGK==koPai3sqdsfJqemvag@mail.gmail.com/
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: ratelimiter: use hrtimer in selftest 2022-08-02T20:47:50+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-08-02T12:56:10+00:00 151c8e499f4705010780189377f85b57400ccbf5 Using msleep() is problematic because it's compared against ratelimiter.c's ktime_get_coarse_boottime_ns(), which means on systems with slow jiffies (such as UML's forced HZ=100), the result is inaccurate. So switch to using schedule_hrtimeout(). However, hrtimer gives us access only to the traditional posix timers, and none of the _COARSE variants. So now, rather than being too imprecise like jiffies, it's too precise. One solution would be to give it a large "range" value, but this will still fire early on a loaded system. A better solution is to align the timeout to the actual coarse timer, and then round up to the nearest tick, plus change. So add the timeout to the current coarse time, and then schedule_hrtimer() until the absolute computed time. This should hopefully reduce flakes in CI as well. Note that we keep the retry loop in case the entire function is running behind, because the test could still be scheduled out, by either the kernel or by the hypervisor's kernel, in which case restarting the test and hoping to not be scheduled out still helps. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Using msleep() is problematic because it's compared against
ratelimiter.c's ktime_get_coarse_boottime_ns(), which means on systems
with slow jiffies (such as UML's forced HZ=100), the result is
inaccurate. So switch to using schedule_hrtimeout().

However, hrtimer gives us access only to the traditional posix timers,
and none of the _COARSE variants. So now, rather than being too
imprecise like jiffies, it's too precise.

One solution would be to give it a large "range" value, but this will
still fire early on a loaded system. A better solution is to align the
timeout to the actual coarse timer, and then round up to the nearest
tick, plus change.

So add the timeout to the current coarse time, and then
schedule_hrtimer() until the absolute computed time.

This should hopefully reduce flakes in CI as well. Note that we keep the
retry loop in case the entire function is running behind, because the
test could still be scheduled out, by either the kernel or by the
hypervisor's kernel, in which case restarting the test and hoping to not
be scheduled out still helps.

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pm/sleep: Add PM_USERSPACE_AUTOSLEEP Kconfig 2022-07-01T08:39:20+00:00 Kalesh Singh kaleshsingh@google.com 2022-06-30T19:12:29+00:00 261e224d6a5c43e2bb8a07b7662f9b4ec425cfec Systems that initiate frequent suspend/resume from userspace can make the kernel aware by enabling PM_USERSPACE_AUTOSLEEP config. This allows for certain sleep-sensitive code (wireguard/rng) to decide on what preparatory work should be performed (or not) in their pm_notification callbacks. This patch was prompted by the discussion at [1] which attempts to remove CONFIG_ANDROID that currently guards these code paths. [1] https://lore.kernel.org/r/20220629150102.1582425-1-hch@lst.de/ Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Link: https://lore.kernel.org/r/20220630191230.235306-1-kaleshsingh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Systems that initiate frequent suspend/resume from userspace
can make the kernel aware by enabling PM_USERSPACE_AUTOSLEEP
config.

This allows for certain sleep-sensitive code (wireguard/rng) to
decide on what preparatory work should be performed (or not) in
their pm_notification callbacks.

This patch was prompted by the discussion at [1] which attempts
to remove CONFIG_ANDROID that currently guards these code paths.

[1] https://lore.kernel.org/r/20220629150102.1582425-1-hch@lst.de/

Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Link: https://lore.kernel.org/r/20220630191230.235306-1-kaleshsingh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wireguard: receive: use dev_sw_netstats_rx_add() 2022-06-10T04:53:10+00:00 Eric Dumazet edumazet@google.com 2022-06-08T15:46:36+00:00 eeb15885ca30669b354ac78eebb212743177ba4b We have a convenient helper, let's use it. This will make the following patch easier to review and smaller. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
We have a convenient helper, let's use it.
This will make the following patch easier to review and smaller.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: device: check for metadata_dst with skb_valid_dst() 2022-04-22T22:59:05+00:00 Nikolay Aleksandrov razor@blackwall.org 2022-04-21T13:48:05+00:00 45ac774c33d834fe9d4de06ab5f1022fe8cd2071 When we try to transmit an skb with md_dst attached through wireguard we hit a null pointer dereference in wg_xmit() due to the use of dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to dereference dst->dev. Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which checks for DST_METADATA flag, and if it's set, then falls back to wireguard's device mtu. That gives us the best chance of transmitting the packet; otherwise if the blackhole netdev is used we'd get ETH_MIN_MTU. [ 263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0 [ 263.693908] #PF: supervisor read access in kernel mode [ 263.694174] #PF: error_code(0x0000) - not-present page [ 263.694424] PGD 0 P4D 0 [ 263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522 [ 263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014 [ 263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20 [ 263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00 [ 263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246 [ 263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000 [ 263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900 [ 263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002 [ 263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00 [ 263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000 [ 263.698054] FS: 00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000 [ 263.698470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0 [ 263.699214] Call Trace: [ 263.699505] <TASK> [ 263.699759] wg_xmit+0x411/0x450 [ 263.700059] ? bpf_skb_set_tunnel_key+0x46/0x2d0 [ 263.700382] ? dev_queue_xmit_nit+0x31/0x2b0 [ 263.700719] dev_hard_start_xmit+0xd9/0x220 [ 263.701047] __dev_queue_xmit+0x8b9/0xd30 [ 263.701344] __bpf_redirect+0x1a4/0x380 [ 263.701664] __dev_queue_xmit+0x83b/0xd30 [ 263.701961] ? packet_parse_headers+0xb4/0xf0 [ 263.702275] packet_sendmsg+0x9a8/0x16a0 [ 263.702596] ? _raw_spin_unlock_irqrestore+0x23/0x40 [ 263.702933] sock_sendmsg+0x5e/0x60 [ 263.703239] __sys_sendto+0xf0/0x160 [ 263.703549] __x64_sys_sendto+0x20/0x30 [ 263.703853] do_syscall_64+0x3b/0x90 [ 263.704162] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 263.704494] RIP: 0033:0x7f3704d50506 [ 263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 [ 263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506 [ 263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003 [ 263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014 [ 263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90 [ 263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001 [ 263.708132] </TASK> [ 263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge] [ 263.708942] CR2: 00000000000000e0 Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Link: https://github.com/cilium/cilium/issues/19428 Reported-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
When we try to transmit an skb with md_dst attached through wireguard
we hit a null pointer dereference in wg_xmit() due to the use of
dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to
dereference dst->dev.

Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which
checks for DST_METADATA flag, and if it's set, then falls back to
wireguard's device mtu. That gives us the best chance of transmitting
the packet; otherwise if the blackhole netdev is used we'd get
ETH_MIN_MTU.

 [  263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0
 [  263.693908] #PF: supervisor read access in kernel mode
 [  263.694174] #PF: error_code(0x0000) - not-present page
 [  263.694424] PGD 0 P4D 0
 [  263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI
 [  263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522
 [  263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
 [  263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20
 [  263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00
 [  263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246
 [  263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000
 [  263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900
 [  263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002
 [  263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00
 [  263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000
 [  263.698054] FS:  00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000
 [  263.698470] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [  263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0
 [  263.699214] Call Trace:
 [  263.699505]  <TASK>
 [  263.699759]  wg_xmit+0x411/0x450
 [  263.700059]  ? bpf_skb_set_tunnel_key+0x46/0x2d0
 [   263.700382]  ? dev_queue_xmit_nit+0x31/0x2b0
 [  263.700719]  dev_hard_start_xmit+0xd9/0x220
 [  263.701047]  __dev_queue_xmit+0x8b9/0xd30
 [  263.701344]  __bpf_redirect+0x1a4/0x380
 [  263.701664]  __dev_queue_xmit+0x83b/0xd30
 [  263.701961]  ? packet_parse_headers+0xb4/0xf0
 [  263.702275]  packet_sendmsg+0x9a8/0x16a0
 [  263.702596]  ? _raw_spin_unlock_irqrestore+0x23/0x40
 [  263.702933]  sock_sendmsg+0x5e/0x60
 [  263.703239]  __sys_sendto+0xf0/0x160
 [  263.703549]  __x64_sys_sendto+0x20/0x30
 [  263.703853]  do_syscall_64+0x3b/0x90
 [  263.704162]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [  263.704494] RIP: 0033:0x7f3704d50506
 [  263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
 [  263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 [  263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506
 [  263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003
 [  263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014
 [  263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90
 [  263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001
 [  263.708132]  </TASK>
 [  263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge]
 [  263.708942] CR2: 00000000000000e0

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Link: https://github.com/cilium/cilium/issues/19428
Reported-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: socket: ignore v6 endpoints when ipv6 is disabled 2022-03-31T02:14:09+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-03-30T01:31:27+00:00 77fc73ac89be96ec8f39e8efa53885caa7cb3645 The previous commit fixed a memory leak on the send path in the event that IPv6 is disabled at compile time, but how did a packet even arrive there to begin with? It turns out we have previously allowed IPv6 endpoints even when IPv6 support is disabled at compile time. This is awkward and inconsistent. Instead, let's just ignore all things IPv6, the same way we do other malformed endpoints, in the case where IPv6 is disabled. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The previous commit fixed a memory leak on the send path in the event
that IPv6 is disabled at compile time, but how did a packet even arrive
there to begin with? It turns out we have previously allowed IPv6
endpoints even when IPv6 support is disabled at compile time. This is
awkward and inconsistent. Instead, let's just ignore all things IPv6,
the same way we do other malformed endpoints, in the case where IPv6 is
disabled.

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: socket: free skb in send6 when ipv6 is disabled 2022-03-31T02:14:08+00:00 Wang Hai wanghai38@huawei.com 2022-03-30T01:31:26+00:00 bbbf962d9460194993ee1943a793a0a0af4a7fbf I got a memory leak report: unreferenced object 0xffff8881191fc040 (size 232): comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0 [<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340 [<ffffffff832974fb>] __alloc_skb+0x1db/0x200 [<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0 [<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110 [<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30 [<ffffffff8119c558>] process_one_work+0x2e8/0x770 [<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0 [<ffffffff811a88e0>] kthread+0x120/0x160 [<ffffffff8100242f>] ret_from_fork+0x1f/0x30 In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_ buffer_to_peer(), the semantics of send6() is required to free skb. But when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it to fix this bug. Signed-off-by: Wang Hai <wanghai38@huawei.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
I got a memory leak report:

unreferenced object 0xffff8881191fc040 (size 232):
  comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0
    [<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340
    [<ffffffff832974fb>] __alloc_skb+0x1db/0x200
    [<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0
    [<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110
    [<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30
    [<ffffffff8119c558>] process_one_work+0x2e8/0x770
    [<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0
    [<ffffffff811a88e0>] kthread+0x120/0x160
    [<ffffffff8100242f>] ret_from_fork+0x1f/0x30

In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_
buffer_to_peer(), the semantics of send6() is required to free skb. But
when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it
to fix this bug.

Signed-off-by: Wang Hai <wanghai38@huawei.com>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: queueing: use CFI-safe ptr_ring cleanup function 2022-03-31T02:14:08+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-03-30T01:31:24+00:00 ec59f128a9bd4255798abb1e06ac3b442f46ef68 We make too nuanced use of ptr_ring to entirely move to the skb_array wrappers, but we at least should avoid the naughty function pointer cast when cleaning up skbs. Otherwise RAP/CFI will honk at us. This patch uses the __skb_array_destroy_skb wrapper for the cleanup, rather than directly providing kfree_skb, which is what other drivers in the same situation do too. Reported-by: PaX Team <pageexec@freemail.hu> Fixes: 886fcee939ad ("wireguard: receive: use ring buffer for incoming handshakes") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
We make too nuanced use of ptr_ring to entirely move to the skb_array
wrappers, but we at least should avoid the naughty function pointer cast
when cleaning up skbs. Otherwise RAP/CFI will honk at us. This patch
uses the __skb_array_destroy_skb wrapper for the cleanup, rather than
directly providing kfree_skb, which is what other drivers in the same
situation do too.

Reported-by: PaX Team <pageexec@freemail.hu>
Fixes: 886fcee939ad ("wireguard: receive: use ring buffer for incoming handshakes")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: device: clear keys on VM fork 2022-03-13T01:00:56+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-03-01T22:26:55+00:00 2d6919c3205b141ba85fb733b2a67937ff85dc7f When a virtual machine forks, it's important that WireGuard clear existing sessions so that different plaintexts are not transmitted using the same key+nonce, which can result in catastrophic cryptographic failure. To accomplish this, we simply hook into the newly added vmfork notifier. As a bonus, it turns out that, like the vmfork registration function, the PM registration function is stubbed out when CONFIG_PM_SLEEP is not set, so we can actually just remove the maze of ifdefs, which makes it really quite clean to support both notifiers at once. Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> 
When a virtual machine forks, it's important that WireGuard clear
existing sessions so that different plaintexts are not transmitted using
the same key+nonce, which can result in catastrophic cryptographic
failure. To accomplish this, we simply hook into the newly added vmfork
notifier.

As a bonus, it turns out that, like the vmfork registration function,
the PM registration function is stubbed out when CONFIG_PM_SLEEP is not
set, so we can actually just remove the maze of ifdefs, which makes it
really quite clean to support both notifiers at once.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>