linux-toradex.git/drivers/net/wireless/ath/ath10k/debug.c, branch v4.10

ath10k: cache calibration data when the core is stopped

2016-10-13T11:06:20+00:00

Commit 0b8e3c4ca29f ("ath10k: move cal data len to hw_params") broke retrieving
the calibration data from cal_data debugfs file. The length of file was always
zero. The reason is:

    static ssize_t ath10k_debug_cal_data_read(struct file *file,
                                          char __user *user_buf,
                                          size_t count, loff_t *ppos)
    {
        struct ath10k *ar = file->private_data;
        void *buf = file->private_data;

This is obviously bogus, private_data cannot contain both struct ath10k and the
buffer. Fix it by caching calibration data to ar->debug.cal_data. This also
allows it to be accessed when the device is not active (interface is down).

The cal_data buffer is fixed size because during the first firmware probe we
don't yet know what will be the lenght of the calibration data. It was simplest
just to use a fixed length. There's a WARN_ON() in
ath10k_debug_cal_data_fetch() if the buffer is too small.

Tested with qca988x and firmware 10.2.4.70.56.

Reported-by: Nikolay Martynov 
Fixes: 0b8e3c4ca29f ("ath10k: move cal data len to hw_params")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Marty Faltesek 
[kvalo@qca.qualcomm.com: improve commit log and minor other changes]
Signed-off-by: Kalle Valo

ath10k: Added support for extended dbglog module id for 10.4

2016-09-02T15:55:55+00:00

For 10.4 fw versions, dbglog module id has been extended from u32
to u64, hence this patch fixes the same in the ath10k driver side.

This patch doesn't break the older 10.4 releases. The FW change
is already present in the older FWs.

Signed-off-by: Maharaja Kennadyrajan 
Signed-off-by: Kalle Valo

tree-wide: replace config_enabled() with IS_ENABLED()

2016-08-04T12:50:07+00:00

The use of config_enabled() against config options is ambiguous.  In
practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the
author might have used it for the meaning of IS_ENABLED().  Using
IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc.  makes the intention
clearer.

This commit replaces config_enabled() with IS_ENABLED() where possible.
This commit is only touching bool config options.

I noticed two cases where config_enabled() is used against a tristate
option:

 - config_enabled(CONFIG_HWMON)
  [ drivers/net/wireless/ath/ath10k/thermal.c ]

 - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE)
  [ drivers/gpu/drm/gma500/opregion.c ]

I did not touch them because they should be converted to IS_BUILTIN()
in order to keep the logic, but I was not sure it was the authors'
intention.

Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada 
Acked-by: Kees Cook 
Cc: Stas Sergeev 
Cc: Matt Redfearn 
Cc: Joshua Kinard 
Cc: Jiri Slaby 
Cc: Bjorn Helgaas 
Cc: Borislav Petkov 
Cc: Markos Chandras 
Cc: "Dmitry V. Levin" 
Cc: yu-cheng yu 
Cc: James Hogan 
Cc: Brian Gerst 
Cc: Johannes Berg 
Cc: Peter Zijlstra 
Cc: Al Viro 
Cc: Will Drewry 
Cc: Nikolay Martynov 
Cc: Huacai Chen 
Cc: "H. Peter Anvin" 
Cc: Thomas Gleixner 
Cc: Daniel Borkmann 
Cc: Leonid Yegoshin 
Cc: Rafal Milecki 
Cc: James Cowgill 
Cc: Greg Kroah-Hartman 
Cc: Ralf Baechle 
Cc: Alex Smith 
Cc: Adam Buchbinder 
Cc: Qais Yousef 
Cc: Jiang Liu 
Cc: Mikko Rapeli 
Cc: Paul Gortmaker 
Cc: Denys Vlasenko 
Cc: Brian Norris 
Cc: Hidehiro Kawai 
Cc: "Luis R. Rodriguez" 
Cc: Andy Lutomirski 
Cc: Ingo Molnar 
Cc: Dave Hansen 
Cc: "Kirill A. Shutemov" 
Cc: Roland McGrath 
Cc: Paul Burton 
Cc: Kalle Valo 
Cc: Viresh Kumar 
Cc: Tony Wu 
Cc: Huaitong Han 
Cc: Sumit Semwal 
Cc: Alexei Starovoitov 
Cc: Juergen Gross 
Cc: Jason Cooper 
Cc: "David S. Miller" 
Cc: Oleg Nesterov 
Cc: Andrea Gelmini 
Cc: David Woodhouse 
Cc: Marc Zyngier 
Cc: Rabin Vincent 
Cc: "Maciej W. Rozycki" 
Cc: David Daney 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ath10k: fix 10.4 extended peer stats update

2016-07-08T06:36:41+00:00

10.4 'extended peer stats' will be not be appended with normal peer stats
data and they shall be coming in separate chunks. Fix this by maintaining
a separate linked list 'extender peer stats' for 10.4 and update
rx_duration for per station statistics. Also parse through beacon filter
(if enabled), to make sure we parse the extended peer stats properly.
This issue was exposed when more than one client is connected and
extended peer stats for 10.4 is enabled

The order for the stats is as below
S - standard peer stats, E- extended peer stats, B - beacon filter stats

{S1, S2, S3..} -> {B1, B2, B3..}(if available) -> {E1, E2, E3..}

Fixes: f9575793d44c ("ath10k: enable parsing per station rx duration for 10.4")
Signed-off-by: Mohammed Shafi Shajakhan 
Signed-off-by: Kalle Valo

ath10k: add pdev param support to enable/disable btcoex

2016-06-02T14:55:22+00:00

10.4 firmware has support to enable or disable btcoex functionality
without reloading firmware via wmi pdev param. Add provision to send
pdev param command via existing btcoex knob.

Signed-off-by: Rajkumar Manoharan 
Signed-off-by: Kalle Valo

ath10k: fix error while writing 'simulate_fw_crash' debugfs

2016-06-02T14:51:34+00:00

Fix invalid argument error while writing 'simulate_fw_crash',
though the funcionality is working fine we get an error 'invalid
argument' because 'count' value is not returned properly
(no reason to reduce the count value for removing the newline)

Fixes the below write error:

/sys/kernel/debug/ieee80211/phy0/ath10k# echo hw-restart >
simulate_fw_crash
-bash: echo: write error: Invalid argument

Also move the 'conf_mutex' as it is really not required for
fetching the userspace buffer.

Reported-by: Maharaja Kennadyrajan 
Signed-off-by: Mohammed Shafi Shajakhan 
Signed-off-by: Maharaja Kennadyrajan 
Signed-off-by: Kalle Valo

ath10k: move htt_op_version to struct ath10k_fw_file

2016-04-20T17:00:27+00:00

Preparation for testmode.c to use ath10k_core_fetch_board_data_api_n().

Signed-off-by: Kalle Valo

ath10k: move wmi_op_version to struct ath10k_fw_file

2016-04-20T17:00:26+00:00

Preparation for testmode.c to use ath10k_core_fetch_board_data_api_n().

Signed-off-by: Kalle Valo

ath10k: refactor firmware images to struct ath10k_fw_components

2016-04-20T17:00:23+00:00

To make it easier to share ath10k_core_fetch_board_data_api_n() with testmode.c
refactor all firmware components to struct ath10k_fw_components. This structure
will hold firmware related files, for example firmware-N.bin and board-N.bin.

For firmware-N.bin create a new struct ath10k_fw_file which contains the actual
firmware image as well as the parsed data from the image.

Modify ath10k_core_start() to take struct ath10k_fw_components() as an argument
which makes it possible in following patches to drop some ugly hacks from
testmode.c.

Signed-off-by: Kalle Valo

ath10k: fix return value for btcoex and peer stats debugfs

2016-04-19T15:10:46+00:00

Return value is incorrect for btcoex and peer stats debugfs
'write' entries if the user provides a value that matches with
the already available debugfs entry, this results in the debugfs
entry getting stuck and the operation has to be terminated manually.
Fix this by returning the appropriate return 'count' as we do it for
other debugfs entries like pktlog etc.

Fixes: cc61a1bbbc0e ("ath10k: enable debugfs provision to enable Peer Stats feature")
Fixes: c28e6f06ff40 ("ath10k: fix sanity check on enabling btcoex via debugfs")
Signed-off-by: Mohammed Shafi Shajakhan 
Signed-off-by: Kalle Valo