linux-toradex.git/drivers/net/wireless/ath/regd.h, branch v3.2.68

ath: fix spelling of Grenada

2011-08-08T20:04:13+00:00

Signed-off-by: Pavel Roskin 
Signed-off-by: John W. Linville

ath: Add function to check if 4.9GHz channels are allowed

2011-01-28T20:44:26+00:00

This adds a helper function to ath/regd.c which can be asked if 4.9GHz channels
are allowed for a given regulatory domain code. This keeps the knowledge of
regdomains and defines like MKK9_MKKC in one place. I'm passing the regdomain
code instead of the ath_regulatory structure because this needs to be called
quite early in the driver inititalization where ath_regulatory is not available
yet in ath5k.

I'm using MKK9_MKKC only because this is the regdomain in the 802.11j enabled
sample cards we got from our vendor. I found some hints in HAL code that this
is used by Atheros to indicate 4.9GHz channels support and that there might be
other domain codes as well, but as I don't have any documentation I'm just
putting in what I need right now. It can be extended later.

Signed-off-by: Bruno Randolf 
Signed-off-by: John W. Linville

ath9k_hw: fix parsing of HT40 5 GHz CTLs

2010-08-31T18:52:23+00:00

The 5 GHz CTL indexes were not being read for all hardware
devices due to the masking out through the CTL_MODE_M mask
being one bit too short. Without this the calibrated regulatory
maximum values were not being picked up when devices operate
on 5 GHz in HT40 mode. The final output power used for Atheros
devices is the minimum between the calibrated CTL values and
what CRDA provides.

Cc: stable@kernel.org [2.6.27+]
Signed-off-by: Luis R. Rodriguez 
Signed-off-by: John W. Linville

ath: Updates for regulatory and country codes.

2009-10-27T20:50:04+00:00

Add a few new country codes and update the regulatory domain for some
countries.

Signed-off-by: Vivek Natarajan 
Signed-off-by: John W. Linville

ath,ar9170: move CTL_ defines into regd.h

2009-09-08T20:31:09+00:00

The ar9170 driver needs the defines for conformance test limit groups
and cannot include regd_common.h

Signed-off-by: Joerg Albert 
Acked-by: Luis R. Rodriguez 
Signed-off-by: John W. Linville

ath: move regulatory info into shared common structure

2009-08-20T15:36:03+00:00

This moves the shared regulatory structure into the
common structure. We will use this ongoing for common
data.

Signed-off-by: Luis R. Rodriguez 
Signed-off-by: John W. Linville

cfg80211: clean up includes

2009-04-22T20:57:17+00:00

Trying to separate header files into net/wireless.h and
net/cfg80211.h has been a source of confusion. Remove
net/wireless.h (because there also is the linux/wireless.h)
and subsume everything into net/cfg80211.h -- except the
definitions for regulatory structures which get moved to
a new header net/regulatory.h.

The "new" net/cfg80211.h is now divided into sections.

There are no real changes in this patch but code shuffling
and some very minor documentation fixes.

I have also, to make things reflect reality, put in a
copyright line for Luis to net/regulatory.h since that
is probably exclusively written by him but was formerly
in a file that only had my copyright line.

Signed-off-by: Johannes Berg 
Cc: Luis R. Rodriguez 
Signed-off-by: John W. Linville

ath: move more setup code into ath_regd_init

2009-04-22T20:54:37+00:00

Setup the wiphy regulatory parameters when first initializing the
Atheros regulatory module.  We can remove five exported symbols this
way and simplify the driver code for both ath5k and ath9k.

Signed-off-by: Bob Copeland 
Signed-off-by: Luis R. Rodriguez 
Signed-off-by: John W. Linville

atheros: introduce ath module containing common ath5k/ath9k/ar9170 code

2009-04-22T20:54:37+00:00

This change creates a new module, ath.ko, which includes code that can
be shared between ath5k, ath9k and ar9170. For now, extract most of the ath9k
regulatory code so it can also be used in ath5k.

Signed-off-by: Bob Copeland 
Signed-off-by: Luis R. Rodriguez 
Signed-off-by: John W. Linville