The remain_on_channel, mgmt_tx, and probe_peer ops previously used
a u64 *cookie output parameter. Now that cfg80211 pre-assigns the
cookie value before invoking drivers, the parameter conveys a value
from caller to driver, not the other way around. Convert it to a
plain u64 input parameter across the ops struct (cfg80211.h),
rdev-ops.h wrappers, nl80211.c/mlme.c call sites, mac80211, and
all driver implementations.

The tx_control_port op is excluded: its cookie pointer is nullable
(passed as NULL when dont_wait_for_ack is set), so the nullable
pointer semantics are still required.

Internal mac80211 helpers ieee80211_start_roc_work() and
ieee80211_attach_ack_skb() still take u64 *cookie because they
assign to the pointee; their callers now pass &cookie to take the
address of the local value parameter.

wil6210's internal wil_p2p_listen() is also updated to take u64
cookie since it is called directly from the remain_on_channel
callback.

Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-12-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Stop overwriting the pre-assigned cookie in wil_p2p_listen(),
wil_cfg80211_mgmt_tx(), and wil_cfg80211_probe_peer().

For remain_on_channel, store the pre-assigned cookie in p2p->cookie
instead of incrementing it. All cancel and expiry callbacks already
read from p2p->cookie so they pick up the correct value.

For mgmt_tx, remove the defensive "cookie ? *cookie : 0" guard;
cfg80211 guarantees a non-NULL cookie pointer.

For probe_peer, store the pre-assigned cookie in req->cookie instead
of the CID value. The CID is still available via req->cid for STA
lookup in wil_probe_client_handle().

Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-5-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add NL80211_EXT_FEATURE_PROBE_AP to allow drivers to advertise
support for probing the associated AP from STA/P2P-client mode.

Extend nl80211_probe_peer() to accept STA/P2P-client interfaces
when the driver advertises NL80211_EXT_FEATURE_PROBE_AP; in that
case the MAC attribute must be omitted (the peer is implied by
the association).

Update cfg80211_probe_status() to accept an optional peer address
and a link_id parameter (-1 for non-MLO), and include
NL80211_ATTR_MLO_LINK_ID in the event when link_id >= 0.
Update all callers.

Signed-off-by: Priyansha Tiwari <priyansha.tiwari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611062225.2144241-3-pritiwa@qti.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Rename NL80211_CMD_PROBE_CLIENT to NL80211_CMD_PROBE_PEER in the UAPI
enum and retain NL80211_CMD_PROBE_CLIENT as a compatibility alias.

Rename the .probe_client cfg80211_ops callback to .probe_peer and
update all in-tree users (wil6210, mwifiex) and mac80211 so the
tree continues to build after this change.

Signed-off-by: Priyansha Tiwari <priyansha.tiwari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611062225.2144241-2-pritiwa@qti.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.

Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.

Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Currently key installation is only supported for netdev. For NAN,
support most key operations (except setting default data key) on
wdevs instead of netdevs, and adjust all the APIs and tracing to
match.

Since nothing currently sets NL80211_EXT_FEATURE_SECURE_NAN, this
doesn't change anything (P2P Device already isn't allowed.)

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107150057.69a0cfad95fa.I00efdf3b2c11efab82ef6ece9f393382bcf33ba8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Currently, a station can only be added to a netdev interface,
mainly because there was no need for a station of a non-netdev
interface.

But for NAN, we will have stations that belong to the NL80211_IFTYPE_NAN
interface.

Prepare for adding/changing/deleting a station that belongs to a non-netdev
interface. This doesn't actually allow such stations - this will be done
in a different patch.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.65c9cc96f814.Ic02066b88bb8ad6b21e15cbea8d720280008c83b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Conversion performed via this Coccinelle script:

  // SPDX-License-Identifier: GPL-2.0-only
  // Options: --include-headers-for-types --all-includes --include-headers --keep-comments
  virtual patch

  @gfp depends on patch && !(file in "tools") && !(file in "samples")@
  identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
 		    kzalloc_obj,kzalloc_objs,kzalloc_flex,
		    kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
		    kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
  @@

  	ALLOC(...
  -		, GFP_KERNEL
  	)

  $ make coccicheck MODE=patch COCCI=gfp.cocci

Build and boot tested x86_64 with Fedora 42's GCC and Clang:

Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01

Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This converts some of the visually simpler cases that have been split
over multiple lines.  I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.

Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script.  I probably had made it a bit _too_ trivial.

So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.

The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>