linux-toradex.git/drivers/net/wireless/ath, branch v3.2.56 Linux kernel for Apalis and Colibri modules ath9k: Fix ETSI compliance for AR9462 2.0 2014-04-01T23:58:55+00:00 Sujith Manoharan c_manoha@qca.qualcomm.com 2014-02-14T02:45:20+00:00 cf5a6031f2bd8799ad551fb9b65f1b1e3104ea8a commit b3050248c167871ca52cfdb2ce78aa2460249346 upstream. The minimum CCA power threshold values have to be adjusted for existing cards to be in compliance with new regulations. Newer cards will make use of the values obtained from EEPROM, support for this was added earlier. To make sure that cards that are already in use and don't have proper values in EEPROM, do not violate regulations, use the initvals instead. Reported-by: Jeang Daniel <dyjeong@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit b3050248c167871ca52cfdb2ce78aa2460249346 upstream.

The minimum CCA power threshold values have to be adjusted
for existing cards to be in compliance with new regulations.
Newer cards will make use of the values obtained from EEPROM,
support for this was added earlier. To make sure that cards
that are already in use and don't have proper values in EEPROM,
do not violate regulations, use the initvals instead.

Reported-by: Jeang Daniel <dyjeong@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ath9k: protect tid->sched check 2014-04-01T23:58:55+00:00 Stanislaw Gruszka sgruszka@redhat.com 2014-02-19T12:15:17+00:00 cf117670cf074367290d5993fe3111ac6d6b1777 commit 21f8aaee0c62708654988ce092838aa7df4d25d8 upstream. We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That is race condition which can result of doing list_del(&tid->list) twice (second time with poisoned list node) and cause crash like shown below: [424271.637220] BUG: unable to handle kernel paging request at 00100104 [424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k] ... [424271.639953] Call Trace: [424271.639998] [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k] [424271.640083] [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k] [424271.640177] [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211] [424271.640258] [<c10f730e>] ? free_compound_page+0x2e/0x40 [424271.640346] [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211] [424271.640437] [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0 [424271.640510] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640578] [<c10fc23c>] ? put_page+0x2c/0x40 [424271.640640] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640706] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640787] [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211] [424271.640897] [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211] [424271.641009] [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211] [424271.641104] [<c13846ce>] ? ip_output+0x7e/0xd0 [424271.641182] [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211] [424271.641266] [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k] [424271.641358] [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211] [424271.641445] [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k] Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=70551 Reported-and-tested-by: Max Sydorenko <maxim.stargazer@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: - Adjust context - Use spin_unlock_bh() directly] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 21f8aaee0c62708654988ce092838aa7df4d25d8 upstream.

We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That
is race condition which can result of doing list_del(&tid->list) twice
(second time with poisoned list node) and cause crash like shown below:

[424271.637220] BUG: unable to handle kernel paging request at 00100104
[424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k]
...
[424271.639953] Call Trace:
[424271.639998]  [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k]
[424271.640083]  [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k]
[424271.640177]  [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211]
[424271.640258]  [<c10f730e>] ? free_compound_page+0x2e/0x40
[424271.640346]  [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211]
[424271.640437]  [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0
[424271.640510]  [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640578]  [<c10fc23c>] ? put_page+0x2c/0x40
[424271.640640]  [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640706]  [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640787]  [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211]
[424271.640897]  [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211]
[424271.641009]  [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211]
[424271.641104]  [<c13846ce>] ? ip_output+0x7e/0xd0
[424271.641182]  [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211]
[424271.641266]  [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k]
[424271.641358]  [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211]
[424271.641445]  [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k]

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=70551

Reported-and-tested-by: Max Sydorenko <maxim.stargazer@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Use spin_unlock_bh() directly]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ath9k: Do not support PowerSave by default 2014-04-01T23:58:47+00:00 Sujith Manoharan c_manoha@qca.qualcomm.com 2014-02-04T03:07:53+00:00 3af9cddbeb22bf36bb40029c8d954b5c77919d21 commit 8298383c2cd5a6d0639f1bb1781fba181bd20154 upstream. Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 8298383c2cd5a6d0639f1bb1781fba181bd20154 upstream.

Even though we make sure PowerSave is not enabled by default
by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init,
PS could be enabled by userspace based on various factors
like battery usage etc. Since PS in ath9k is just broken
and has been untested for years, remove support for it, but
allow a user to explicitly enable it using a module parameter.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ath9k_htc: Do not support PowerSave by default 2014-04-01T23:58:47+00:00 Oleksij Rempel linux@rempel-privat.de 2014-01-30T08:14:53+00:00 f3fca80e2025094e7791b6669d799285a0a69010 commit 6bca610d97b6139a1d7598b8009da9d339daa50f upstream. It is a copy/paste of patch provided by Sujith for ath9k. "Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter." Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 6bca610d97b6139a1d7598b8009da9d339daa50f upstream.

It is a copy/paste of patch provided by Sujith for ath9k.

"Even though we make sure PowerSave is not enabled by default
by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init,
PS could be enabled by userspace based on various factors
like battery usage etc. Since PS in ath9k is just broken
and has been untested for years, remove support for it, but
allow a user to explicitly enable it using a module parameter."

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ath9k: Fix interrupt handling for the AR9002 family 2014-02-15T19:20:14+00:00 Sujith Manoharan c_manoha@qca.qualcomm.com 2013-12-16T01:34:59+00:00 5982c7fe4acf612e50738475c2c7f2eb47ec7ec2 commit 73f0b56a1ff64e7fb6c3a62088804bab93bcedc2 upstream. This patch adds a driver workaround for a HW issue. A race condition in the HW results in missing interrupts, which can be avoided by a read/write with the ISR register. All chips in the AR9002 series are affected by this bug - AR9003 and above do not have this problem. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 73f0b56a1ff64e7fb6c3a62088804bab93bcedc2 upstream.

This patch adds a driver workaround for a HW issue.

A race condition in the HW results in missing interrupts,
which can be avoided by a read/write with the ISR register.
All chips in the AR9002 series are affected by this bug - AR9003
and above do not have this problem.

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ath9k_htc: properly set MAC address and BSSID mask 2014-02-15T19:20:11+00:00 Mathy Vanhoef vanhoefm@gmail.com 2013-11-28T11:21:45+00:00 f7a9877cc68188252558001c9f6907fcb8af0b0f commit 657eb17d87852c42b55c4b06d5425baa08b2ddb3 upstream. Pick the MAC address of the first virtual interface as the new hardware MAC address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579. Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 657eb17d87852c42b55c4b06d5425baa08b2ddb3 upstream.

Pick the MAC address of the first virtual interface as the new hardware MAC
address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579.

Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ath9k: avoid accessing MRC registers on single-chain devices 2013-10-26T20:05:58+00:00 Felix Fietkau nbd@openwrt.org 2013-08-13T10:33:28+00:00 44527b813312ca17cc98623b2cbc9ce1f473038a commit a1c781bb20ac1e03280e420abd47a99eb8bbdd3b upstream. They are not implemented, and accessing them might trigger errors Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit a1c781bb20ac1e03280e420abd47a99eb8bbdd3b upstream.

They are not implemented, and accessing them might trigger errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ath9k: fix rx descriptor related race condition 2013-10-26T20:05:58+00:00 Felix Fietkau nbd@openwrt.org 2013-08-10T13:59:15+00:00 42cb87a101c3fd0e080e9605ee70275efdcc8280 commit e96542e55a2aacf4bdeccfe2f17b77c4895b4df2 upstream. Similar to a race condition that exists in the tx path, the hardware might re-read the 'next' pointer of a descriptor of the last completed frame. This only affects non-EDMA (pre-AR93xx) devices. To deal with this race, defer clearing and re-linking a completed rx descriptor until the next one has been processed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit e96542e55a2aacf4bdeccfe2f17b77c4895b4df2 upstream.

Similar to a race condition that exists in the tx path, the hardware
might re-read the 'next' pointer of a descriptor of the last completed
frame. This only affects non-EDMA (pre-AR93xx) devices.

To deal with this race, defer clearing and re-linking a completed rx
descriptor until the next one has been processed.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ath9k: always clear ps filter bit on new assoc 2013-10-26T20:05:58+00:00 Felix Fietkau nbd@openwrt.org 2013-08-06T12:18:10+00:00 bd1d8b9014eae19a1f87197984f051760236a2bc commit 026d5b07c03458f9c0ccd19c3850564a5409c325 upstream. Otherwise in some cases, EAPOL frames might be filtered during the initial handshake, causing delays and assoc failures. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 026d5b07c03458f9c0ccd19c3850564a5409c325 upstream.

Otherwise in some cases, EAPOL frames might be filtered during the
initial handshake, causing delays and assoc failures.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
ath9k_htc: Restore skb headroom when returning skb to mac80211 2013-09-10T00:57:33+00:00 Helmut Schaa helmut.schaa@googlemail.com 2013-08-16T19:39:40+00:00 83537f7467eb1f42014cd48cbd615c101cfc4d98 commit d2e9fc141e2aa21f4b35ee27072d84e9aa6e2ba0 upstream. ath9k_htc adds padding between the 802.11 header and the payload during TX by moving the header. When handing the frame back to mac80211 for TX status handling the header is not moved back into its original position. This can result in a too small skb headroom when entering ath9k_htc again (due to a soft retransmission for example) causing an skb_under_panic oops. Fix this by moving the 802.11 header back into its original position before returning the frame to mac80211 as other drivers like rt2x00 or ath5k do. Reported-by: Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit d2e9fc141e2aa21f4b35ee27072d84e9aa6e2ba0 upstream.

ath9k_htc adds padding between the 802.11 header and the payload during
TX by moving the header. When handing the frame back to mac80211 for TX
status handling the header is not moved back into its original position.
This can result in a too small skb headroom when entering ath9k_htc
again (due to a soft retransmission for example) causing an
skb_under_panic oops.

Fix this by moving the 802.11 header back into its original position
before returning the frame to mac80211 as other drivers like rt2x00
or ath5k do.

Reported-by: Marc Kleine-Budde <mkl@blackshift.org>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Tested-by: Marc Kleine-Budde <mkl@blackshift.org>
Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>