linux-toradex.git/drivers/net/wireless/b43/phy_lcn.c, branch v4.1.1 Linux kernel for Apalis and Colibri modules b43: flush some writes on Broadcom MIPS SoCs 2014-08-25T20:00:42+00:00 Rafał Miłecki zajec5@gmail.com 2014-08-07T05:45:37+00:00 25c15566635fef86e87f762f73a19f24598e45fa Access to PHY and radio registers is indirect on Broadcom hardware and it seems that addressing on some MIPS SoCs may require flushing. So far this problem was noticed on 0x4716 SoC only (marketing names: BCM4717, BCM4718). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Access to PHY and radio registers is indirect on Broadcom hardware and
it seems that addressing on some MIPS SoCs may require flushing. So far
this problem was noticed on 0x4716 SoC only (marketing names: BCM4717,
BCM4718).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
b43: don't duplicate common PHY read/write ops 2014-08-25T20:00:42+00:00 Rafał Miłecki zajec5@gmail.com 2014-07-31T19:59:43+00:00 d342b95dd735014a590f9051b1ba227eb54ca8f6 Most of the PHYs use the same way of accessing registers, so move that code to the shared place. An exception is G-PHY which sometimes access A-PHY regs and requires special handling. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Most of the PHYs use the same way of accessing registers, so move that
code to the shared place. An exception is G-PHY which sometimes access
A-PHY regs and requires special handling.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
b43: use one shared function for setting MAC frequency 2014-07-18T17:45:26+00:00 Rafał Miłecki zajec5@gmail.com 2014-07-17T17:31:05+00:00 c2cb2c4cf1a089501242a1701b589d2ad5eb0448 By the way add few chipsets that were tracked with "wl" dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
By the way add few chipsets that were tracked with "wl" dumps.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-25T18:19:35+00:00 Karl Beldan karl.beldan@rivierawaves.com 2013-03-25T15:26:57+00:00 675a0b049abf6edf30f8dd84c5610b6edc2296c8 Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 
Drivers that don't use chanctxes cannot perform VHT association because
they still use a "backward compatibility" pair of {ieee80211_channel,
nl80211_channel_type} in ieee80211_conf and ieee80211_local.

Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
b43: LCN-PHY: minor clean ups 2011-09-27T18:34:02+00:00 Rafał Miłecki zajec5@gmail.com 2011-09-21T19:44:15+00:00 177c3732feda607adcd07aefd8ecfd79c9f0bd53 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
b43: LCN-PHY: finish sense setup 2011-09-19T20:10:14+00:00 Rafał Miłecki zajec5@gmail.com 2011-09-16T14:36:32+00:00 2981808269941490f209b2db88ae021d7007b39d Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
b43: LCN-PHY: add more init tweaks 2011-09-19T20:10:13+00:00 Rafał Miłecki zajec5@gmail.com 2011-09-16T10:34:03+00:00 bbb5574224168ef62c8549535c0d0a99e989ecf3 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
b43: LCN-PHY: init TX power control 2011-09-19T20:10:13+00:00 Rafał Miłecki zajec5@gmail.com 2011-09-16T10:34:02+00:00 1b0a69c1ff445c265b173cc82c3f41a01dd90bec Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
b43: LCN-PHY: implement SPUR avoidance mode 2011-09-19T20:10:12+00:00 Rafał Miłecki zajec5@gmail.com 2011-09-16T10:34:01+00:00 ac78a52f49e3645c49e2c13a239b570d2e590bee Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
b43: LCN-PHY: set TX filters 2011-09-19T20:10:12+00:00 Rafał Miłecki zajec5@gmail.com 2011-09-16T10:34:00+00:00 0c5644b98b54dd4d156aba098689adb2054205cd Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>