linux-toradex.git/drivers/net/wireless/intel, branch v4.9.96

iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265

2018-04-13T17:48:21+00:00

[ Upstream commit 15098803d38778070b8edfa5a3d5fc4fef10d0a1 ]

In a previous commit, we removed support for API versions earlier than
22 for these NICs.  By mistake, the *_UCODE_API_MIN definitions were
set to 17.  Fix that.

Fixes: 4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22")
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3

2018-04-13T17:48:21+00:00

[ Upstream commit e4c49c4937951de1cdbe35572ade40c948dec1e1 ]

We only need to handle d0i3 entry and exit during suspend resume if
system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry
failures will cause suspend to fail.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791

Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: tt: move ucode_loaded check under mutex

2018-04-13T17:48:20+00:00

[ Upstream commit d9954405758a0cbbe258d9b4d4dc12a06fa48a28 ]

The ucode_loaded check should be under the mutex, since it can
otherwise change state after we looked at it and before we got
the mutex. Fix that.

Fixes: 5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device")
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: Fix command queue number on d0i3 flow

2018-04-13T17:48:20+00:00

[ Upstream commit c72c37b7f392ad7edc10b6092fa48c632ba6f4ed ]

During d0i3 flow we flush all the queue except from the command queue.
Currently, in this flow the command queue is hard coded to 9.
In DQA the command queue number has changed from 9 to 0.
Fix that.

This fixes a problem in runtime PM resume flow.

Fixes: 097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode")
Signed-off-by: Haim Dreyfuss 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix firmware debug restart recording

2018-04-13T17:48:20+00:00

[ Upstream commit addce854f164a68da9cb158e2e7e447705068549 ]

When we want to stop the recording of the firmware debug
and restart it later without reloading the firmware we
don't need to resend the configuration that comes with
host commands.
Sending those commands confused the hardware and led to
an NMI 0x66.

Change the flow as following:
* read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL)
* clear those registers
* wait for the hardware to complete its write to the buffer
* get the data
* restore the value of those registers (to restart the
  recording)

For early start (where the configuration is already
compiled in the firmware), we don't need to set those
registers after the firmware has been loaded, but only
when we want to restart the recording without having
restarted the firmware.

Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: a000: fix memory offsets and lengths

2018-03-24T10:00:11+00:00

[ Upstream commit f4d1047914ea05e0f8393944da18f6ee5dad24c4 ]

Memory offsets and lengths for A000 HW is different
than currently specified.

Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support")
Signed-off-by: Liad Kaufman 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: split the handler and the wake parts of the notification infra

2018-03-24T10:00:11+00:00

[ Upstream commit 2220fb2960b72915e7fd9da640a4695dceff238c ]

The notification infrastructure (iwl_notification_wait_*
functions) allows to wait until a list of notifications
will come up from the firmware and to run a special handler
(notif_wait handler) when those are received.

The operation mode notifies the notification infrastructure
about any Rx being received by the mean of
iwl_notification_wait_notify() which will do two things:
1) call the notif_wait handler
2) wakeup the thread that was waiting for the notification

Typically, only after those two steps happened, the
operation mode will run its own handler for the notification
that was received from the firmware. This means that the
thread that was waiting for that notification can be
running before the operation mode's handler was called.

When the operation mode's handler is ASYNC, things get even
worse since the thread that was waiting for the
notification isn't even guaranteed that the ASYNC callback
was added to async_handlers_list before it starts to run.
This means that even calling
iwl_mvm_wait_for_async_handlers() can't guarantee that
absolutely everything related to that notification has run.
The following can happen:

Thread sending the command        Operation mode's Rx path
--------------------------        ------------------------
iwl_init_notification_wait()
iwl_mvm_send_cmd()
                                  iwl_mvm_rx_common()
                                  iwl_notification_wait_notify()
iwl_mvm_wait_for_async_handlers()
// Possibly free some data
// structure
                                  list_add_tail(async_handlers_list);
                                  schedule_work(async_handlers_wk);
                                  // Access the freed structure

Split the 'run notif_wait's handler' and the 'wake up the
thread' parts to fix this. This allows the operation mode
to do the following:

Thread sending the command        Operation mode's Rx path
--------------------------        ------------------------
iwl_init_notification_wait()
iwl_mvm_send_cmd()
                                  iwl_mvm_rx_common()
                                  iwl_notification_wait()
                                  // Will run the notif_wait's handler
                                  list_add_tail(async_handlers_list);
                                  schedule_work(async_handlers_wk);
                                  iwl_notification_notify()
iwl_mvm_wait_for_async_handlers()

This way, the waiter is guaranteed that all the handlers
have been run (if SYNC), or at least enqueued (if ASYNC)
by the time it wakes up.

Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 

Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: rs: don't override the rate history in the search cycle

2018-03-22T08:17:53+00:00

[ Upstream commit 992172e3aec19e5b0ea5b757ba40a146b9282d1e ]

When we are in a search cycle, we try different combinations
of parameters. Those combinations are called 'columns'.
When we switch to a new column, we first need to check if
this column has a suitable rate, if not, we can't try it.
This means we must not erase the statistics we gathered
for the previous column until we are sure that we are
indeed switching column.

The code that tries to switch to a new column first sets
a whole bunch of things for the new column, and only then
checks that we can find suitable rates in that column.
While doing that, the code mistakenly erased the rate
statistics. This code was right until
struct iwl_scale_tbl_info grew up for TPC.

Fix this to make sure we don't erase the rate statistics
until we are sure that we can indeed switch to the new
column.

Note that this bug is really harmless since it causes a
change in the behavior only when we can't find any rate
in the new column which should really not happen. In the
case we do find a suitable we reset the rate statistics
a few lines later anyway.

Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix RX SKB header size and align it properly

2018-03-22T08:17:51+00:00

[ Upstream commit 5cddd05c9cbe420436799716d009bc0372ef8268 ]

When receiving a frame, we currently pull in sizeof(*hdr) plus
some extra (crypto/snap), which is too much, most headers aren't
actually sizeof(*hdr) since that takes into account the 4-address
format but doesn't take into account QoS. As a result, a typical
frame will have 4 bytes of the payload in the SKB header already.

Fix this by calculating the correct header length, and now that
we have that, align the end of the SKB header to a multiple of 4
so that the IP header will be aligned properly when pulled in.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix the TX queue hang timeout for MONITOR vif type

2018-02-03T16:05:41+00:00

[ Upstream commit d1b275ffec459c5ae12b5c7086c84175696e5a9f ]

The MONITOR type is missing in the interface type switch.
Add it.

Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Luca Coelho 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman