linux-toradex.git/drivers/net/wireless/p54, branch v3.2.56 Linux kernel for Apalis and Colibri modules p54usb: add USB ID for Corega WLUSB2GTST USB adapter 2013-10-26T20:06:06+00:00 Christian Lamparter chunkeey@googlemail.com 2013-09-24T19:56:46+00:00 6f95357cb8bba2debf6b29347f4334e3cc12f897 commit 1e43692cdb7cc445d6347d8a5207d9cef0c71434 upstream. Added USB ID for Corega WLUSB2GTST USB adapter. Reported-by: Joerg Kalisch <the_force@gmx.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 1e43692cdb7cc445d6347d8a5207d9cef0c71434 upstream.

Added USB ID for Corega WLUSB2GTST USB adapter.

Reported-by: Joerg Kalisch <the_force@gmx.de>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
p54usb: corrected USB ID for T-Com Sinus 154 data II 2013-03-06T03:23:53+00:00 Tomasz Guszkowski tsg@o2.pl 2013-02-05T21:10:31+00:00 d66d1873526fa1fb405fef0206035cd3e683a7c2 commit 008e33f733ca51acb2dd9d88ea878693b04d1d2a upstream. Corrected USB ID for T-Com Sinus 154 data II. ISL3887-based. The device was tested in managed mode with no security, WEP 128 bit and WPA-PSK (TKIP) with firmware 2.13.1.0.lm87.arm (md5sum: 7d676323ac60d6e1a3b6d61e8c528248). It works. Signed-off-by: Tomasz Guszkowski <tsg@o2.pl> Acked-By: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 008e33f733ca51acb2dd9d88ea878693b04d1d2a upstream.

Corrected USB ID for T-Com Sinus 154 data II. ISL3887-based. The
device was tested in managed mode with no security, WEP 128
bit and WPA-PSK (TKIP) with firmware 2.13.1.0.lm87.arm (md5sum:
7d676323ac60d6e1a3b6d61e8c528248). It works.

Signed-off-by: Tomasz Guszkowski <tsg@o2.pl>
Acked-By: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
p54usb: add USBIDs for two more p54usb devices 2013-01-16T01:13:15+00:00 Christian Lamparter chunkeey@googlemail.com 2012-12-27T14:18:20+00:00 2fe324eaf2ae6a91126c2951f35718e392d6f043 commit 4010fe21a315b4223c25376714c6a2b61b722e5c upstream. This patch adds USBIDs for: - DrayTek Vigor 530 - Zoom 4410a It also adds a note about Gemtek WUBI-100GW and SparkLAN WL-682 USBID conflict [WUBI-100GW is a ISL3886+NET2280 (LM86 firmare) solution, whereas WL-682 is a ISL3887 (LM87 firmware)] device. Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 4010fe21a315b4223c25376714c6a2b61b722e5c upstream.

This patch adds USBIDs for:
	- DrayTek Vigor 530
	- Zoom 4410a

It also adds a note about Gemtek WUBI-100GW
and SparkLAN WL-682 USBID conflict [WUBI-100GW
is a ISL3886+NET2280 (LM86 firmare) solution,
whereas WL-682 is a ISL3887 (LM87 firmware)]
device.

Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows>

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
p54usb: add USB ID for T-Com Sinus 154 data II 2013-01-16T01:13:14+00:00 Tomasz Guszkowski tsg@o2.pl 2012-12-22T17:30:01+00:00 53bb1146abaef910a53f9df18d58341259bd8cf3 commit 3194b7fcdf6caea338b5d2c72d76fed80437649c upstream. Added USB ID for T-Com Sinus 154 data II. Signed-off-by: Tomasz Guszkowski <tsg@o2.pl> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 3194b7fcdf6caea338b5d2c72d76fed80437649c upstream.

Added USB ID for T-Com Sinus 154 data II.

Signed-off-by: Tomasz Guszkowski <tsg@o2.pl>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: p54usb: remove __devinit* from the struct usb_device_id table 2012-09-12T02:37:10+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-08-18T00:48:28+00:00 e60af62b40a97d3cfa1d8624d0e55037930bc039 commit b9c4167cbbafddac3462134013bc15e63e4c53ef upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Bjørn Mork <bjorn@mork.no> CC: Christian Lamparter <chunkeey@googlemail.com> CC: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit b9c4167cbbafddac3462134013bc15e63e4c53ef upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Christian Lamparter <chunkeey@googlemail.com>
CC: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
p54spi: Release GPIO lines and IRQ on error in p54spi_probe 2012-04-02T16:52:36+00:00 Max Filippov jcmvbkbc@gmail.com 2012-02-29T20:40:08+00:00 0abe0c69f3f07313c6f9eaa60b2a760a9a5c94f5 commit 62ebeed8d00aef75eac4fd6c161cae75a41965ca upstream. This makes it possible to reload driver if insmod has failed due to missing firmware. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 62ebeed8d00aef75eac4fd6c161cae75a41965ca upstream.

This makes it possible to reload driver if insmod has failed due to
missing firmware.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2011-11-22T21:46:55+00:00 John W. Linville linville@tuxdriver.com 2011-11-22T21:46:55+00:00 02f1ce35bed3ceb56868ec534591e15ffdcef879 






p54spi: Fix workqueue deadlock
2011-11-17T19:40:37+00:00

Michael Büsch
m@bues.ch

2011-11-16T22:55:46+00:00

2d1618170eb493d18f66f2ac03775409a6fb97c6

priv->work must not be synced while priv->mutex is locked, because
the mutex is taken in the work handler.
Move cancel_work_sync down to after the device shutdown code.
This is safe, because the work handler checks fw_state and bails out
early in case of a race.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>





priv->work must not be synced while priv->mutex is locked, because
the mutex is taken in the work handler.
Move cancel_work_sync down to after the device shutdown code.
This is safe, because the work handler checks fw_state and bails out
early in case of a race.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>







p54spi: Add missing spin_lock_init
2011-11-17T19:39:32+00:00

Michael Büsch
m@bues.ch

2011-11-16T22:48:31+00:00

32d3a3922d617a5a685a5e2d24b20d0e88f192a9

The tx_lock is not initialized properly. Add spin_lock_init().

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>





The tx_lock is not initialized properly. Add spin_lock_init().

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>







drivers/net: Add export.h to files using EXPORT_SYMBOL/THIS_MODULE
2011-10-31T23:31:08+00:00

Paul Gortmaker
paul.gortmaker@windriver.com

2011-05-27T20:14:23+00:00

ee40fa0656a730491765545ff7550f3c1ceb0fbc

These were getting the macros from an implicit module.h
include via device.h, but we are planning to clean that up.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

drivers/net: Add export.h to wireless/brcm80211/brcmfmac/bcmsdh.c

This relatively recently added file uses EXPORT_SYMBOL and hence
needs export.h included so that it is compatible with the module.h
split up work.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>





These were getting the macros from an implicit module.h
include via device.h, but we are planning to clean that up.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

drivers/net: Add export.h to wireless/brcm80211/brcmfmac/bcmsdh.c

This relatively recently added file uses EXPORT_SYMBOL and hence
needs export.h included so that it is compatible with the module.h
split up work.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>