linux-toradex.git/drivers/net/wireless/p54, branch v3.5.1

Merge tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2012-05-22T22:50:46+00:00

Pull USB 3.5-rc1 changes from Greg Kroah-Hartman:
"Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window.

It's touches a lot of different parts of the kernel, all USB drivers,
due to some API cleanups (getting rid of the ancient err() macro) and
some changes that are needed for USB 3.0 power management updates.

There are also lots of new drivers, pimarily gadget, but others as
well. We deleted a staging driver, which was nice, and finally
dropped the obsolete usbfs code, which will make Al happy to never
have to touch that again.

There were some build errors in the tree that linux-next found a few
days ago, but those were fixed by the most recent changes (all were
due to us not building with CONFIG_PM disabled.)

Signed-off-by: Greg Kroah-Hartman "

* tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits)
xhci: Fix DIV_ROUND_UP compile error.
xhci: Fix compile with CONFIG_USB_SUSPEND=n
USB: Fix core compile with CONFIG_USB_SUSPEND=n
brcm80211: Fix compile error for .disable_hub_initiated_lpm.
Revert "USB: EHCI: work around bug in the Philips ISP1562 controller"
MAINTAINERS: Add myself as maintainer to the USB PHY Layer
USB: EHCI: fix command register configuration lost problem
USB: Remove races in devio.c
USB: ehci-platform: remove update_device
USB: Disable hub-initiated LPM for comms devices.
xhci: Add Intel U1/U2 timeout policy.
xhci: Add infrastructure for host-specific LPM policies.
USB: Add macros for interrupt endpoint types.
xhci: Reserve one command for USB3 LPM disable.
xhci: Some Evaluate Context commands must succeed.
USB: Disable USB 3.0 LPM in critical sections.
USB: Add support to enable/disable USB3 link states.
USB: Allow drivers to disable hub-initiated LPM.
USB: Calculate USB 3.0 exit latencies for LPM.
USB: Refactor code to set LPM support flag.
...

Conflicts:
arch/arm/mach-exynos/mach-nuri.c
arch/arm/mach-exynos/mach-universal_c210.c
drivers/net/wireless/ath/ath6kl/usb.c

USB: Disable hub-initiated LPM for comms devices.

2012-05-18T22:42:55+00:00

Hub-initiated LPM is not good for USB communications devices.  Comms
devices should be able to tell when their link can go into a lower power
state, because they know when an incoming transmission is finished.
Ideally, these devices would slam their links into a lower power state,
using the device-initiated LPM, after finishing the last packet of their
data transfer.

If we enable the idle timeouts for the parent hubs to enable
hub-initiated LPM, we will get a lot of useless LPM packets on the bus
as the devices reject LPM transitions when they're in the middle of
receiving data.  Worse, some devices might blindly accept the
hub-initiated LPM and power down their radios while they're in the
middle of receiving a transmission.

The Intel Windows folks are disabling hub-initiated LPM for all USB
communications devices under a xHCI USB 3.0 host.  In order to keep
the Linux behavior as close as possible to Windows, we need to do the
same in Linux.

Set the disable_hub_initiated_lpm flag for for all USB communications
drivers.  I know there aren't currently any USB 3.0 devices that
implement these class specifications, but we should be ready if they do.

Signed-off-by: Sarah Sharp 
Cc: Marcel Holtmann 
Cc: Gustavo Padovan 
Cc: Johan Hedberg 
Cc: Hansjoerg Lipp 
Cc: Tilman Schmidt 
Cc: Karsten Keil 
Cc: Peter Korsgaard 
Cc: Jan Dumon 
Cc: Petko Manolov 
Cc: Steve Glendinning 
Cc: "John W. Linville" 
Cc: Kalle Valo 
Cc: "Luis R. Rodriguez" 
Cc: Jouni Malinen 
Cc: Vasanthakumar Thiagarajan 
Cc: Senthil Balasubramanian 
Cc: Christian Lamparter 
Cc: Brett Rudley 
Cc: Roland Vossen 
Cc: Arend van Spriel 
Cc: "Franky (Zhenhui) Lin" 
Cc: Kan Yan 
Cc: Dan Williams 
Cc: Jussi Kivilinna 
Cc: Ivo van Doorn 
Cc: Gertjan van Wingerde 
Cc: Helmut Schaa 
Cc: Herton Ronaldo Krzesinski 
Cc: Hin-Tak Leung 
Cc: Larry Finger 
Cc: Chaoming Li 
Cc: Daniel Drake 
Cc: Ulrich Kunitz 
Signed-off-by: Sarah Sharp

drivers/net: Convert compare_ether_addr to ether_addr_equal

2012-05-11T03:33:01+00:00

Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script:

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)

Signed-off-by: Joe Perches 
Signed-off-by: David S. Miller

drivers/net: add missing __devexit_p() annotations

2012-04-21T19:28:47+00:00

Drivers that refer to a __devexit function in an operations
structure need to annotate that pointer with __devexit_p so
replace it with a NULL pointer when the section gets discarded.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Mathieu Poirier 
Signed-off-by: David S. Miller

net/wireless: use module_pci_driver

2012-04-16T18:38:50+00:00

This patch converts the drivers in drivers/net/wireless/* to use
module_pci_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin 
Cc: "John W. Linville" 
Cc: Jiri Slaby 
Cc: Nick Kossifidis 
Cc: "Luis R. Rodriguez" 
Cc: Simon Kelley 
Cc: Jouni Malinen 
Cc: Lennert Buytenhek 
Cc: Christian Lamparter 
Cc: Ivo van Doorn 
Cc: Larry Finger 
Cc: linux-wireless@vger.kernel.org
Acked-by: Lennert Buytenhek 
Signed-off-by: John W. Linville

mac80211: remove antenna_sel_tx TX info field

2012-04-10T18:54:09+00:00

This field is never set to anything non-zero in
mac80211, so we should be able to remove it.
Unfortunately though, the iwlwifi and iwlegacy
drivers use it for their internal TX status
processing (which shouldn't be using the rate
control API to start with), so add a new field
"status.antenna" for them, at least for now.

In the future, I plan to use the new field to
hold the hardware queue, while the SKB's queue
mapping holds the AC.

Signed-off-by: Johannes Berg 
Signed-off-by: John W. Linville

p54usb: Load firmware asynchronously

2012-04-09T20:07:35+00:00

Drivers that load firmware from their probe routine have problems with
the latest versions of udev as they get timeouts while waiting for user
space to start. The problem is fixed by using request_firmware_nowait()
and delaying the start of mac80211 until the firmware is loaded.

To prevent the possibility of the driver being unloaded while the
firmware loading callback is still active, a completion queue entry
is used.

Also, to simplify the firmware loading procedure, this patch removes
the old, unofficial and confusing fallback firmware names. However,
they are still supported! So any user - who is still using them -
is hereby advised to link/rename their old firmware filenames:
	isl3890usb to isl3886usb
	isl3887usb_bare to isl3887usb

Signed-off-by: Larry Finger 
Signed-off-by: Christian Lamparter 
Signed-off-by: John W. Linville

p54: only unregister ieee80211_hw when it has been registered

2012-04-09T20:07:35+00:00

p54_unregister_common may now be called by the backend
driver's remove routine, even if the ieee80211_hw device
struct was never successfully registered.

Signed-off-by: Christian Lamparter 
Signed-off-by: John W. Linville

p54pci: use new driver.pm interface for suspend/resume

2012-03-06T20:16:06+00:00

Signed-off-by: Christian Lamparter 
Signed-off-by: John W. Linville

p54: pass interface setup errors back to mac80211

2012-03-06T20:16:06+00:00

Signed-off-by: Christian Lamparter 
Signed-off-by: John W. Linville