linux-toradex.git/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c, branch v5.6

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13

2019-05-21T09:28:45+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Kate Stewart 
Reviewed-by: Jilayne Lovejoy 
Reviewed-by: Steve Winslow 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman

rt2x00: remove last_nostatus_check

2019-04-25T16:43:07+00:00

We do not any longer check txstatus timeout from tasklet, so do not need
this optimization.

Signed-off-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo

rt2x00: do not print error when queue is full

2019-04-25T16:40:54+00:00

For unknown reasons printk() on some context can cause CPU hung on
embedded MT7620 AP/router MIPS platforms. What can result on wifi
disconnects.

This patch move queue full messages to debug level what is consistent
with other mac80211 drivers which drop packet silently if tx queue is
full. This make MT7620 OpenWRT routers more stable, what was reported
by various users.

Signed-off-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo

rt2x00: do not increment sequence number while re-transmitting

2019-04-12T18:31:07+00:00

Currently rt2x00 devices retransmit the management frames with
incremented sequence number if hardware is assigning the sequence.

This is HW bug fixed already for non-QOS data frames, but it should
be fixed for management frames except beacon.

Without fix retransmitted frames have wrong SN:

 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1
 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1
 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1

With the fix SN stays correctly the same:

 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C
 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C
 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C

Cc: stable@vger.kernel.org
Signed-off-by: Vijayakumar Durai 
[sgruszka: simplify code, change comments and changelog]
Signed-off-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo

rt2x00: do not check for txstatus timeout every time on tasklet

2018-10-01T15:37:31+00:00

Do not check for tx status timeout everytime we perform txstatus tasklet.
Perform check once per half a second.

Signed-off-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo

rt2800mmio: use txdone/txstatus routines from lib

2018-10-01T15:37:28+00:00

Use usb txdone/txstatus routines (now in rt2800libc) for mmio devices.

Note this also change how we handle INT_SOURCE_CSR_TX_FIFO_STATUS
interrupt. Now it is disabled since IRQ routine till end of the txstatus
tasklet (the same behaviour like others interrupts). Reason to do not
disable this interrupt was not to miss any tx status from 16 entries
FIFO register. Now, since we check for tx status timeout, we can
allow to miss some tx statuses. However this will be improved in further
patch where I also implement read status FIFO register in the tasklet.

Signed-off-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-06-03T13:31:58+00:00

Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.

Signed-off-by: David S. Miller

Revert "rt2800: use TXOP_BACKOFF for probe frames"

2018-05-29T07:39:07+00:00

This reverts commit fb47ada8dc3c30c8e7b415da155742b49536c61e.

In some situations when we set TXOP_BACKOFF, the probe frame is
not sent at all. What it worse then sending probe frame as part
of AMPDU and can degrade 11n performance to 11g rates.

Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo

rt2x00: check against flushing empty queue

2018-05-04T12:34:20+00:00

We have check if queue is not empty when start flushing queues on
by mac80211 callback, but we also can start flushing queues by internal
driver calls. So move check into rt2x00queue_flush_queue() to assure
we do not flush empty queue anytime.

Additionally add warning if we start to kick empty queue as in such
situation we set wrong index in the HW queue, what can confuse the HW
and have various negative consequences.

Signed-off-by: Stanislaw Gruszka 
Signed-off-by: Kalle Valo

rt2x00: pause almost full queue early

2018-01-08T17:39:06+00:00

Do not drop &queue->tx_lock and acquire it again to pause queue when
available entries are below the threshold.

Patch should mitigate problem of frequently printed errors:
"Error - Dropping frame due to full tx queue"

Signed-off-by: Stanislaw Gruszka 
Tested-by: Enrico Mioso@gmail.com
Tested-by: Enrico Mioso 
Signed-off-by: Kalle Valo