linux-toradex.git/drivers/net/wireless, branch v4.4.129

rtl8187: Fix NULL pointer dereference in priv->conf_mutex

2018-04-24T07:32:04+00:00

commit 7972326a26b5bf8dc2adac575c4e03ee7e9d193a upstream.

This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.

Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 [] (unwind_backtrace) from [] (show_stack+0x10/0x14)
 [] (show_stack) from [] (register_lock_class+0x4f4/0x55c)
 [] (register_lock_class) from [] (__lock_acquire+0x74/0x1938)
 [] (__lock_acquire) from [] (lock_acquire+0xfc/0x23c)
 [] (lock_acquire) from [] (mutex_lock_nested+0x50/0x3b0)
 [] (mutex_lock_nested) from [] (rtl8187_start+0x2c/0xd54)
 [] (rtl8187_start) from [] (drv_start+0xa8/0x320)
 [] (drv_start) from [] (ieee80211_do_open+0x2bc/0x8e4)
 [] (ieee80211_do_open) from [] (__dev_open+0xb8/0x120)
 [] (__dev_open) from [] (__dev_change_flags+0x88/0x14c)
 [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48)
 [] (dev_change_flags) from [] (devinet_ioctl+0x738/0x840)
 [] (devinet_ioctl) from [] (sock_ioctl+0x164/0x2f4)
 [] (sock_ioctl) from [] (do_vfs_ioctl+0x8c/0x9d0)
 [] (do_vfs_ioctl) from [] (SyS_ioctl+0x6c/0x7c)
 [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x1c)
 Unable to handle kernel NULL pointer dereference at virtual address 00000000
 pgd = cd1ec000
 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000
 Internal error: Oops: 817 [#1] PREEMPT ARM
 Modules linked in:
 CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
 Hardware name: Generic AM3517 (Flattened Device Tree)
 task: ce73eec0 task.stack: cd1ea000
 PC is at mutex_lock_nested+0xe8/0x3b0
 LR is at mutex_lock_nested+0xd0/0x3b0

Cc: stable@vger.kernel.org
Signed-off-by: Sudhir Sreedharan 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

wl1251: check return from call to wl1251_acx_arp_ip_filter

2018-04-13T17:50:14+00:00

[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ]

Currently the less than zero error check on ret is incorrect
as it is checking a far earlier ret assignment rather than the
return from the call to wl1251_acx_arp_ip_filter. Fix this by
adding in the missing assginment.

Detected by CoverityScan, CID#1164835 ("Logically dead code")

Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering")
Signed-off-by: Colin Ian King 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ray_cs: Avoid reading past end of buffer

2018-04-13T17:50:09+00:00

[ Upstream commit e48d661eb13f2f83861428f001c567fdb3f317e8 ]

Using memcpy() from a buffer that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. In this case, the source was made longer, since it did not
match the destination structure size. Additionally removes a needless cast.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay 
Signed-off-by: Kees Cook 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ath5k: fix memory leak on buf on failed eeprom read

2018-04-13T17:50:08+00:00

[ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ]

The AR5K_EEPROM_READ macro returns with -EIO if a read error
occurs causing a memory leak on the allocated buffer buf. Fix
this by explicitly calling ath5k_hw_nvram_read and exiting on
the via the freebuf label that performs the necessary free'ing
of buf when a read error occurs.

Detected by CoverityScan, CID#1248782 ("Resource Leak")

Signed-off-by: Colin Ian King 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl8723be: Fix loss of signal

2018-03-28T16:40:15+00:00

commit 78dc897b7ee67205423dbbc6b56be49fb18d15b5 upstream.

In commit c713fb071edc ("rtlwifi: rtl8821ae: Fix connection lost problem
correctly") a problem in rtl8821ae that caused loss of signal was fixed.
That same problem has now been reported for rtl8723be. Accordingly,
the ASPM L1 latency has been increased from 0 to 7 to fix the instability.

Signed-off-by: Larry Finger 
Cc: Stable 
Tested-by: James Cameron 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: fix P2P_DEVICE ethernet address generation

2018-03-28T16:40:15+00:00

commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b upstream.

The firmware has a requirement that the P2P_DEVICE address should
be different from the address of the primary interface. When not
specified by user-space, the driver generates the MAC address for
the P2P_DEVICE interface using the MAC address of the primary
interface and setting the locally administered bit. However, the MAC
address of the primary interface may already have that bit set causing
the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this
by using a random address instead to determine the P2P_DEVICE address.

Cc: stable@vger.kernel.org # 3.10.y
Reported-by: Hans de Goede 
Reviewed-by: Hante Meuleman 
Reviewed-by: Pieter-Paul Giesberts 
Reviewed-by: Franky Lin 
Signed-off-by: Arend van Spriel 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.

2018-03-24T09:58:47+00:00

[ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ]

Reset the driver current tx read/write index to zero when inactiveps
nic out of sync with HW state. Wrong driver tx read/write index will
cause Tx fail.

Signed-off-by: Tsang-Shian Lin 
Signed-off-by: Ping-Ke Shih 
Signed-off-by: Larry Finger 
Cc: Yan-Hsuan Chuang 
Cc: Birming Chiu 
Cc: Shaofu 
Cc: Steven Ting 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

rndis_wlan: add return value validation

2018-03-24T09:58:44+00:00

[ Upstream commit 9dc7efd3978aa67ae598129d2a3f240b390ce508 ]

Function create_singlethread_workqueue() will return a NULL pointer if
there is no enough memory, and its return value should be validated
before using. However, in function rndis_wlan_bind(), its return value
is not checked. This may cause NULL dereference bugs. This patch fixes
it.

Signed-off-by: Pan Bian 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mt7601u: check return value of alloc_skb

2018-03-24T09:58:44+00:00

[ Upstream commit 5fb01e91daf84ad1e50edfcf63116ecbe31e7ba7 ]

Function alloc_skb() will return a NULL pointer if there is no enough
memory. However, in function mt7601u_mcu_msg_alloc(), its return value
is not validated before it is used. This patch fixes it.

Signed-off-by: Pan Bian 
Acked-by: Jakub Kicinski 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ath: Fix updating radar flags for coutry code India

2018-03-24T09:58:41+00:00

[ Upstream commit c0c345d4cacc6a1f39d4856f37dcf6e34f51a5e4 ]

As per latest regulatory update for India, channel 52, 56, 60, 64
is no longer restricted to DFS. Enabling DFS/no infra flags in driver
results in applying all DFS related restrictions (like doing CAC etc
before this channel moves to 'available state') for these channels
even though the country code is programmed as 'India' in he hardware,
fix this by relaxing the frequency range while applying RADAR flags
only if the country code is programmed to India. If the frequency range
needs to modified based on different country code, ath_is_radar_freq
can be extended/modified dynamically.

Signed-off-by: Mohammed Shafi Shajakhan 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman