linux-toradex.git/drivers/net/wireless, branch v4.9.28

wlcore: Add RX_BA_WIN_SIZE_CHANGE_EVENT event

2017-05-14T12:00:22+00:00

commit e7ee74b56f23ba447d3124f2eccc32033cca501d upstream.

This event is used by the Firmware to limit the RX BA win size
for a specific link.

The event handler updates the new size in the mac's sta->sta struct.

BA sessions opened for that link will use the new restricted
win_size. This limitation remains until a new update is received or
until the link is closed.

Signed-off-by: Maxim Altshul 
Signed-off-by: Kalle Valo 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

wlcore: Pass win_size taken from ieee80211_sta to FW

2017-05-14T12:00:22+00:00

commit 42c7372a111630dab200c2f959424f5ec3bf79a4 upstream.

When starting a new BA session, we must pass the win_size to the FW.

To do this we take max_rx_aggregation_subframes (BA RX win size)
which is stored in ieee80211_sta structure (e.g per link and not per HW)

We will use the value stored per link when passing the win_size to
firmware through the ACX_BA_SESSION_RX_SETUP command.

Signed-off-by: Maxim Altshul 
Signed-off-by: Kalle Valo 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: Make skb header writable before use

2017-05-14T12:00:20+00:00

commit 9cc4b7cb86cbcc6330a3faa8cd65268cd2d3c227 upstream.

The driver was making changes to the skb_header without
ensuring it was writable (i.e. uncloned).
This patch also removes some boiler plate header size
checking/adjustment code as that is also handled by the
skb_cow_header function used to make header writable.

Signed-off-by: James Hughes 
Acked-by: Arend van Spriel 
Signed-off-by: Kalle Valo 
Signed-off-by: Arend van Spriel 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: Ensure pointer correctly set if skb data location changes

2017-05-14T12:00:20+00:00

commit 455a1eb4654c24560eb9dfc634f29cba3d87601e upstream.

The incoming skb header may be resized if header space is
insufficient, which might change the data adddress in the skb.
Ensure that a cached pointer to that data is correctly set by
moving assignment to after any possible changes.

Signed-off-by: James Hughes 
Acked-by: Arend van Spriel 
Signed-off-by: Kalle Valo 
Signed-off-by: Arend van Spriel 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: writing zero bytes to debugfs causes a crash

2017-05-14T12:00:17+00:00

commit 251fe09f13bfb54c1ede66ee8bf8ddd0061c4f7c upstream.

This is a static analysis fix.  The warning is:

	drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c:912 iwl_mvm_fw_dbg_collect()
	warn: integer overflows 'sizeof(*desc) + len'

I guess this code is supposed to take a NUL character, but if we write
zero bytes then it tries to write -1 characters and crashes.

Fixes: c91b865cb14d ("iwlwifi: mvm: support description for user triggered fw dbg collection")
Signed-off-by: Dan Carpenter 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: synchronize firmware DMA paging memory

2017-05-14T12:00:17+00:00

commit 4b70f07686d75d1eb5d956812cc810944e0b29b2 upstream.

When driver needs to access the contents of a streaming DMA buffer
without unmapping it it should call dma_sync_single_for_cpu().
Once the call has been made, the CPU "owns" the DMA buffer and can
work with it as needed.
Before the device accesses the buffer, however, ownership should be
transferred back to it with dma_sync_single_for_device().
Both calls weren't performed by the driver, resulting with odd paging
errors on some platforms. Fix it.

Fixes: a6c4fb4441f4 ("iwlwifi: mvm: Add FW paging mechanism for the UMAC on PCI")
Signed-off-by: Sara Sharon 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix references to first_agg_queue in DQA mode

2017-05-14T12:00:17+00:00

commit c56108b58ab870892277940a1def0d6b153f3e26 upstream.

In DQA mode, first_agg_queue is initialized to
IWL_MVM_DQA_MIN_DATA_QUEUE. This causes two bugs in the tx response
flow:

1. When TX fails, we set IEEE80211_TX_STAT_AMPDU_NO_BACK regardless
   if we actually have aggregation open on the queue. This causes
   mac80211 to send a BAR frame even though there is no aggregation
   open.
   Fix that by simply checking the AMPDU flag that is set on by
   mac80211 for AMPDU packets.

2. When reclaiming frames in aggregation mode, we reclaim based on
   scheduler ssn and not the SN.
   The reason is that scheduler ssn may be ahead of SN due to a hole
   in the BA window that was filled.
   However, if we have aggregations open on IWL_MVM_DQA_BSS_CLIENT_QUEUE
   the reclaim flow will still go to the code of non-aggregation
   instead of the aggregation code since IWL_MVM_DQA_BSS_CLIENT_QUEUE
   is smaller than IWL_MVM_DQA_MIN_DATA_QUEUE, although it is a valid
   aggregation queue.
   Fix that by always using the aggregation reclaim code by default in
   DQA mode (currently it is implicitly used by default for all queues
   except the reserved BSS queue).

Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue")
Signed-off-by: Sara Sharon 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix pending frame counter calculation

2017-05-14T12:00:17+00:00

commit 94c3e614df2117626fccfac8f821c66e30556384 upstream.

In DQA mode the check whether to decrement the pending frames
counter relies on the tid status and not on the txq id.
This may result in an inconsistent state of the pending frames
counter in case frame is queued on a non aggregation queue but
with this TID, and will be followed by a failure to remove the
station and later on SYSASSERT 0x3421 when trying to remove the
MAC.
Such frames are for example bar and qos NDPs.
Fix it by aligning the condition of incrementing the counter
with the condition of decrementing it - rely on TID state for
DQA mode.
Also, avoid internal error like this affecting station removal
for DQA mode - since we can know for sure it is an internal
error.

Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue")
Signed-off-by: Sara Sharon 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm/pcie: adjust A-MSDU tx_cmd length in PCIe

2017-05-14T12:00:16+00:00

commit 05e5a7e58d3f8f597ebe6f78aaa13a2656b78239 upstream.

Instead of setting the tx_cmd length in the mvm code, which is
complicated by the fact that DQA may want to temporarily store
the SKB on the side, adjust the length in the PCIe code which
also knows about this since it's responsible for duplicating
all those headers that are account for in this code.

As the PCIe code already relies on the tx_cmd->len field, this
doesn't really introduce any new dependencies.

To make this possible we need to move the memcpy() of the TX
command until after it was updated.

This does even simplify the code though, since the PCIe code
already does a lot of manipulations to build A-MSDUs correctly
and changing the length becomes a simple operation to see how
much was added/removed, rather than predicting it.

Fixes: 24afba7690e4 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues")
Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: Use aux queue for offchannel frames in dqa

2017-05-14T12:00:16+00:00

commit 6574dc943fc32a2fce69fab14891abca7eecb67c upstream.

Since offchannel activity doesn't always require a BSS, e.g. ANQP
sessions, offchannel frames should not use the BSS queue, because it
might not be initialized.
Use the auxilary queue instead

Fixes: e3118ad74d7e ("iwlwifi: mvm: support tdls in dqa mode")
Signed-off-by: Beni Lev 
Signed-off-by: Luca Coelho 
Signed-off-by: Greg Kroah-Hartman